2026 year model, 1.2 hp 900 Watt Servo Motor and 1 to 1 belt drive.
Upgrade for Mini Milling Machines with digital readout of spindle speed on controller
This build (what comes in the box, first image) is what the upgrade kit contains.
This kit has multiple improvements over the first 92 that I built to include the new single
piece spindle pulley.Only the first image represents what comes in the box.
All other images are of previous builds and may not show the latest parts, designs, brackets or belts etc.Comes with a 1 to 1 ratio: Motor 1 rotation to Spindle 1 rotation.
This allows the digital display/readout on the controller to match the actual speed
the spindle is turning +/- 2%. See video short (image 2).Assembly instruction video address is in the paper included in the box:
Currently some parts are still hand made:
Lead Time can be up to 7 days.
That also means that if you lose a part, it may have to be hand made to fit your specific
system as follows:
- Motor controlleris custom made 2026 design. You will be asked for information to find
your previous purchase before we ship you replacement parts. - Motor mounting brackets are hand made.
- Spindle lock is standardized.
(if you start up the motor with the lock installed it will burn out the controller.
This is not warranty. See value commitment program below) - Spindle drive pulley is standardized.
- Belt cover shieldis hand made.
What I am saying is that if you lose the belt cover you will have to make your own to fit.
Maybe I can make a replacement but only withreasonablyaccurate measurements.
Make sure and check the spindle. Some machines were sold with a 28mm spindle.
This kit Only fits machines with a 30mm spindle!Fits:
Note:
Always measure the spindle before you order
See image #3 Bolton XJ-9510
BusyBee CX605
Central Machinery Mill/Drill
Clarke CMD300 Milling Drilling Machine
Craftex Mini Mill
Cummins (Tools Now) 7877 Mini Mill
Eastwood 32498 Mini Mill
Grizzly G8689 Mini Milling Machine
Hare & Forbes HM-10 Mill/Drill
Harbor Freight 44991
Homier 03947
KLUTCH Mini Mill
Princess Auto 8507667
Powerfist Mini Mill
Micro-Mark 82573
MicroLux Milling Machine
Northern Tool 49657
Penn Tool Co XJ-9510-1
Precise Mini Mill
Travers Tools OT2213
OTMT Mini Mill
SIEG X2D Mini Mill
SIEG X2L Mini Mill
SIEG X2P Mini Mill
SIEG X2-R8 Mini Mill
SIEG X2-MT3 Mini Mill
L.M.S. 4962 SIEG Mini Mill
Speedway Mini Mill
Wen 33013Does not fit: Grizzly G0781 because it has a 28mm spindle.
About the system:
- Eliminates noisy and failure prone internal plastic H/L speed gear.
- Control unit is placed above and and clear of the metal filingsthat all milling
machines create. It is also nearly completely sealed. As seen in images. - Runsextremelysmoothand quiet.
- Adds the reverse on the fly feature.
- Adds the E-Stop feature.
- Includes the power went out safety feature. This is a must for automated systems.
- Achievablespindle high speed RPM from (factory claims 2.500 RPM)
With our 900 one to one drive:See video for results. Yourresults may vary depending on
the power supply,programmingand the milling machine it isinstalledon. - Low speed achievablespindle speed:
O.E.M. claims 100 RPM. My testing shows almost no torque at these speeds.
Compared to our motor: See video image 2. You cannot stop it by hand, outstanding torque. - Increases hp from (factoryclaims 1/3 to 3/4 hp (2 to 3 NM torque depending on model)
Our results are 1 HP and 10 NM meter torque.
All milling machines are dangerous, increasing thehorsepowerincreases this danger.
It is yourresponsibilityto insure fit and proper application. We make noguaranteeof
safety, application or that thisproductis suitable for your intended use.
Our liability is limited to the purchase price of this item.
Motor Specifications:
- Watt: 900(1.2 HP)
- Voltage: 110V
- HZ: 50 to 60
- Torque: 11 N.M.
- RPM: 200 to 3,400 RPM in 10 RPM increments
Note: Manufacturer recommended 300 to 3,500 RPMs.
My personal testing results: This motor runs best between300 and 3,400 RPMs.
System Includes:
- A new 900 watt motor.
- A new 2026 controller/driver like theone seen in photos.
This control unit is assembled in USA by The Custom Crafter. It comes fullyprogramed and ready to run. - Thermal overload protection with reset.
- E-Stopsystem with adjustable brake.
- Power went out safety program.
- Blue latching button is reverseon the fly.
- Adjustable brake.
- Adjustable soft start.
- Programmable fastest &slowest speed limits.
Speed adjusts in 10 RPM increments. - The Custom Craftermade in the USA motor mount brackets (color marked to help you reassemble).
- Mounting hardware. Includes specialty stainless, metric button head bolts.
- One aluminum motor side timing pulley. Custom made forthe Custom Crafter to fit
our motors (see photos). - One 150L050 belt.
- On-Line access to programming instructions and fault codes.
- Package will notinclude: Written assembly instructions.Milling machine. Blue belt cover seen in images.
Limited 30 day parts warranty.
Labor is buyers responsibility:
See details, what\'s covered and for how long etc below.Shipping both ways for all parts returned for warranty is the
buyersresponsibility. Parts returned will be inspected for unique identification markand or abuse. If found to be abuse
or missing the identity mark, no warrantyexchange part will be provided and buyer will be required to pay shipping to
get their parts back. Warranty exchange parts may or may not be new but insteadrefurbished or demos that I have from
previous builds. Warranty starts on theday our records show the system as paid and not the date the item is actuallyreceived.
Servo Motor. - Iwill exchange a defective servo motor for up to 30 days. Buyer must return themotor + the control unit +
the speed control switch for inspection and testing.Additionally original packaging such as Styrofoam package inserts must
be usedto return these parts.
Computer controlunit. - (Jamming motor is not covered see value commitment policy below)
I will exchange a defective control unit PCB for up to 30 days. Buyermust return the motor + the
control unit + the speed control switch forinspection and testing. Additionally original packaging such as Styrofoampackage
inserts must be used to return these parts.Improper installationor abusive operation is not warranty.
Value commitment Program
This mod increases performance past what the machine was originally built to do.
It is very tempting to cut too much in a single pass, thus causing repeated jams because of this
or because you forgot to remove the lock. This is not warranty. Instead just be honest and do the fix below.
Within 60 days of purchase, we will fix the controller unit for you one time at our cost of $45.
Just contact us with the information on the paperwork in the box. You pay to ship it to us.
Replacement Parts:
We keep all replacement parts in stock. This includes themain PCB and servo motor.
A 5 day shippingdelay is possible if we have to make the part.
A 15 day delay ispossible if we are on vacation. Customer Support:
All after the salecustomer support is done by text to the number included in the box.
All Warranty andreturns are done in house here in Florida. Use the text number provided in the box to requestassistance.Ask questionsbefore ordering.
Returns are not handled by : You pay shipping both ways. Round trip is over $65.
Than there are likely restocking fees as well.
All milling machines are dangerous, increasing the horsepower increases thisdanger. It is your responsibility to insure fit and proper application. We makeno guarantee of safety, application or that this product is suitable for yourintended use. Our liability is limited to the purchase price of this item.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.