8090 Carburetor Inlet Fitting with Washer Brass for Edelbrock &AFB Carburetor US
⚙️ Specifications:- Type: Fuel Line Fitting- Thread Size: 5/8\"-20 UNF (0.625\" x 20TPI)- Material:Forged Brass- Seat Type: 45° Inverted Flare
- Finish: Natural Brass (Corrosion Resistant)
Fitment:For Edelbrock Square Bore and AFB Carburetors
For Edelbrock Carburetor Fuel Inlet Fitting 8090 5/8-18 IF Female to 5/8-20 Male
🛠️ Key Features:✔ High-Pressure Rated – 150 PSI working pressure✔ Ethanol-Resistant – Safe for E10 fuels
⚡ Performance Benefits:- Prevents fuel leaks at carb inlet- Maintains proper fuel flow- Eliminates need for thread sealant
📦 Included:1× Brass Inverted Flare Fitting
⚠️ Installation Notes:• Torque Spec: 18-22 ft-lbs• Alignment: Hand-start threads before tightening• Inspection: Check for cracks after 500 hours
🔧 Pro Tips:1. Use flare nut wrench to prevent rounding2. Replace copper washers if reused3. Pressure test with soapy water
Why Brass?☑️ Won\'t galvanically corrode with aluminum carbs☑️ More durable than zinc fittings☑️ Better heat dissipation than steel
You can use the following payment methods such as PayPal、Google Pay、Visa、Master Card、Amex and Discover to pay.
All orders will be shipped within 1 business days after the payment is cleared.
PS:
If you have not received it within 10 days, please contact us first, and then we will arrange to resend or refund to you asap.
If you haveanyproblems with the following issue,please Contact Us immediately.
⚙️ Specifications:- Type: Fuel Line Fitting- Thread Size: 5/8\"-20 UNF (0.625\" x 20TPI)- Material:Forged Brass- Seat Type: 45° Inverted Flare
- Finish: Natural Brass (Corrosion Resistant)
Fitment:For Edelbrock Square Bore and AFB Carburetors
For Edelbrock Carburetor Fuel Inlet Fitting 8090 5/8-18 IF Female to 5/8-20 Male
🛠️ Key Features:✔ High-Pressure Rated – 150 PSI working pressure✔ Ethanol-Resistant – Safe for E10 fuels
⚡ Performance Benefits:- Prevents fuel leaks at carb inlet- Maintains proper fuel flow- Eliminates need for thread sealant
📦 Included:1× Brass Inverted Flare Fitting
⚠️ Installation Notes:• Torque Spec: 18-22 ft-lbs• Alignment: Hand-start threads before tightening• Inspection: Check for cracks after 500 hours
🔧 Pro Tips:1. Use flare nut wrench to prevent rounding2. Replace copper washers if reused3. Pressure test with soapy water
Why Brass?☑️ Won\'t galvanically corrode with aluminum carbs☑️ More durable than zinc fittings☑️ Better heat dissipation than steel
PAYMENT
You can use the following payment methods such as PayPal、Google Pay、Visa、Master Card、Amex and Discover to pay.
SHIPPING
All orders will be shipped within 1 business days after the payment is cleared.
PS:
If you have not received it within 10 days, please contact us first, and then we will arrange to resend or refund to you asap.
Terms of Sale
If you haveanyproblems with the following issue,please Contact Us immediately.
ABOUT US
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.