Features:
1: Wide range of applications
2: Simple operation
3: Long service life
4: Ultra-long transmission distance, the farthest transmission distance in the open field: 2 kilometersProduct name: 8ch 433M Lora remote control response point-to-point wireless IO switch relay module for smart home PTZ
(recommended to purchase both transmitter and receiver)This is a wireless remote control switch with response function, no configuration is required, as long as the transceiver \"band and ID\" settings are consistent, it can be controlled. With response function, the LED indicator on the transmitter will indicate the switch status of the receiver.Transmitter:
1. Working voltage: DC 12V (8-30V)
2. Working current: 12-30MA
3. input channels: 8 channels, low pulse trigger (NPN)
4. Transmit power: 22dBm
5. Working frequency band: 425~455MHz (can be set by DIP switch)
6. The farthest transmission distance in the open field: 2 kilometers
7. Size: 115x90x40mm (with shell)
8. Weight: 49g (without case) 120g (with case)Receiver:
1. Working voltage: DC 12V (11-15V)
2. Working current: 12-260MA
3. output channels: 8 channels 10A relay output
4. Working frequency band: 425~455MHz (can be set by DIP switch)
6. The longest transmission distance in open field: 2 kilometers
6. Working modes: instantaneous (jog), self-locking, interlocking, delay (can be set
7. Dimensions: 145x90x40mm (with case)
Weight: 134g (without case), 200g (with case)
8. Maximum load: 10A/250VAC, 10A/125VAC, 10A/30VDC, 10A/28VDC, 10A/12VDCThe first use process:
1. Confirm that the frequency and ID of the receiver and transmitter are the same
2. Power on the receiver first, the PWR light is on
3. Power on the transmitter again, the PWR light flashes, the PWR light lights up and the receiver flashes at the same time, indicating that the pairing is successful.
4. At this point, the relay on the receiver can be remotely controlled through the input port on the transmitter.Notice:
To install the antenna, remove the housing top cover and
The frequency or ID number cannot be the same when using two transmitters at the same time
The frequency or ID number cannot be the same when using two receiversPackage list:1*Transmitter
1*Antenna1*Receiver
1*Antenna1*Transmitter1*Receiver
2*Antenna1*Antenna
If product is defective or damage upon arrival, or wrong product shipped, please contact us immediately. Returns accepted within 30 days of delivery date and item must be in original new condition.
Please contact us first if you have any problems/questions/concerns. We will be happy to resolve any issues you may have in a cordial and friendly manner.
Shipping
Please fill in the correct address and zip code and I will ship quickly!
Refund
- If the item is defect when you receive it or you are not satisfied with it, please return it within 30 days for a replacement or money back. But the items must be back in factory condition. Please contact us and double check the return address before you return it.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.