6PCS PC817 2 Channel Voltage Converter Module Optocoupler Isolation Driving Modu

Description:
1. Driving Port Signal Voltage:3.3-24V
2. Output voltage range: 3.6-30V(The output current depends on the specific situation but not over 10MA. When the total power is fixed, the voltage and current are inversely proportional)NOTE:
The input port is shared with GND;
The output ports are independent of each other;
It is optocoupler output.V and G will be connected after input valid signa in input port;Package Included:
6 x PC817 2 Channel Optocoupler Isolation Board

• Driving Port Signal Voltage:3.3-24V; Output voltage range: 3.6-30V(The output current depends on the specific situation but no more than 10MA;When the total power is fixed, the voltage and current are inversely proportional.)
• 【Jumper Cap】The jumper cap can achieve high potential output or low potential output.
• 【Independent Voltage】Onboard 2-Channel 817:can achieve different voltage control at the same time.
• 【Note】If it is a pulse signal, please note that the limit of 817 is below 3KHZ. If the control signal is greater than 3KHZ, do not use this module, it will not work properly.
• 【Package Content】6 x PC817 2 Channel Optocoupler Isolation Board.