|
>> If you dont know how to design a userbar, then write here a Userbar that you want.
>> If you know how to design them help these people and design what they request.
|
 |
 |
USERBARS.org | Free Forum Userbars
| On eBay now |
5Pcs KY-040 Rotary Encoder Module 360 Degree Switch Encoders with Knob Cap Brick
$11.79

The KY-040 rotary encoder is a 360 degree rotary input device (i.e. a control knob) that provides an indication of how much the knob has been rotated AND which direction it is rotating in.It is a great device for stepper and servo motor control. You can also use it to control devices like digital potentiometers. It is ideal for navigating menus on a display or taking inputs such as numbers or text characters. The range of input can be easily defined and mapped in software. A push button switch is built into this encoder. If you push on the shaft, the normally open switch \"SW\" will close. This can be used as an On/Off switch, to change control functions, ranges, selecting a menu item or entering a number. The \"D\" shaft of the encoder can be fitted with a knob for using it in a productThe KY-040 rotary encoder has 20 positions per revolution. These positions are felt as small “clicks” when you turn the encoder. Inside the encoder there are two switches. One switch connects pin A to pin C and the other switch connects pin B to C. In each encoder position, both switches are either opened or closed. Each click causes these switches to change states. If both switches are closed, turning the encoder either clockwise or counterclockwise one position will cause both switches to open. If both switches are open, turning the encoder either clockwise or counterclockwise one position will cause both switches to close.Determining which switch changed states first is how the direction of rotation is determined. If A changed states first, the switch is rotating in a clockwise direction. If B changed states first, the switch is rotating in a counter clockwise direction.Features:Working voltage: 5VPulses per 360 degree revolution: 20Push button shaft On/Off switchThreaded shaft for panel mounting, also 2 mounting screw holes on the circuit boardStandard \"D\" shaft, you can purchase knobs to give it a finished lookSize: About 31 * 19 * 29mm / 1.22\" * 0.75\" * 1.14\"KY-040 Pin Outs:CLK: Encoder Pin ADT: Encoder Pin BSW: Pushbutton On/Off Switch+: +5V DC Power SupplyGND: Ground (Encoder Pin C)Package Includes:5X (5 pieces) KY-040 Rotary Encode ModuleLocking Nut and Washer On Apr 1, 2025 at 10:12:34 PDT, seller added the following information:

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
|
|
|
 |
 |
|