HayWHNKN®5L 220V Lab Dual-Arm Mixer Kneading Machine for High-viscosity MaterialsThis equipment is designed for kneading and mixing high-viscosity elastic materials including rubber, silicone rubber, food-grade adhesives and agents. The machine is characterized by a horizontal double-shaft configuration with dual-speed operation under atmospheric pressure, and achieves manual cylinder rotation for material transfer and manual cylinder lid control. Due to the operation at atmospheric pressure, the machine enhances indoor hygiene, reduces physical strain, and boosts production efficiency. SpecificationInput voltage:220V 50/60Hz 1PH
Motor Power:1.5KW
Heating Power: 0.8kw*3Temperature range:0-300 Degree Celsius
Funnel capacity:5L Funnel material: 304 Stainless steel
Rotational speed:Variable frequency control Without a plug Temperature Test Port & Heat Transfer oil Input PortOil Filling Hole,
Gear lubricant must be added before using the machine. Control PanelThe Tail Positioning Bolt Lid & Fixing BoltsHopper reverse handle Double-Shaft Mixing Installation and Debugging1-This machine is a small test device which can be placed on the ground or workbench.
2-Connect the power supply and check whether the motor is rotating forward.(220V 50/60hz)
3-After equipment installation, check whether bolts in all parts are loose, verify if there is any leakage after the machine is powered on, inspect whether transmission systems operate normally, observe mechanical transmission performance, and confirm the rotation direction of dual shafts. The inward rotation direction is considered standard. When it is found that there is no abnormalities after no-load operation is conducted for 30 minutes, the equipment can proceed to trial production.
4-Precautions for adding thermal oil: At the first time, add the thermal oil to the temperature measurement point to heat and stabilize the expansion of thermal oil. If there is no overflow, continue to add a small amount of thermal oil. Add a small amount of thermal oil for several times to avoid expansion and overflow of thermal oil.
5-Tighten the tail positioning bolt and do not reverse it during operation.
6-Gear lubricant must be added before using the machine.
7-Clean the funnel thoroughly.
8-Add materials to the hopper.
9-Close the lid and tighten the fixing bolts on it.
10-Start the main mixing motor and close the bin lid. During mixing, activate the heating function with preset temperature settings. When conditions permit, open the bin lid to monitor material changes.
11-Normal shutdown:
Stop the host; Manually flip the tank over and pour the materials out; Reversely discharge the materials; Clean the remaining glue in the tank after shutdown. Warning-Read carefully and understand all INSTRUCTIONS before operating the machine.Failure to follow the safety rules and other basic safety precautions may result in serious personal injury.
-The machine should not be filled with too much heat transfer oil. Please add the appropriate amount of heat transfer oil.
-Gear lubricant must be added before using the machine.
-Always keep children away from this machine, PROHIBIT children from operating the machine.
-Never touch the RUNNNING Parts or insert hard ware into the machine.
-Always unplug the machine when assembling or disassembling the unit.
-Never insert hands inside the entrance.
-Press the On/Off switch once to turn on or turn off the machine. Pressing the buttons for multiple times may damage the machine.
-Moisture of the machine during transportation may cause some internal parts to rust, which will not affect the use.
-The part in contact with the Materials is made of 304 stainless steel.
-Each batch may have small improvements as the product needs to evolve.Item included:5 L Double Arm Mixer stainless steel 220V*1
Item Number: 134103
Shipping & Handling Details
Default Shipping Cost or Free Shipping Information:
▲Default shipping cost or free shipping service is only for the lower 48 United States by UPS Ground or USPS. Other areas or needs other shipping ways, please contact us.
▲Buyers from Guam, Puerto Rico, Virgin Islands, American Samoa, Alaska, Hawaii, PO Boxes, APO/FPO addresses or other countries/areas,there WILL be extra shipping costs, please contact us for more detailed information.
▲Please make sure your address is valid for both UPS and USPS services. Any costs incurred because of incorrect or undeliverable address should be undertaken by buyer.
Handling Time:Shipping is usually made in 1-3 business days after payments cleared. Orders are processed fromMonday-Friday; Not on the weekends & public holidays.
Sales tax / Customs duties:Any sales taxes or Customs duties are not included. If came out, they must be undertaken by the buyer. Sales Tax of 8% will be applied for orders shipped within the state of California.
Damage In Shipping:Email or call us First! We will work with you to get the case resolved in the fastest method.
Return / Refund
If you are not 100% happy with your purchase, please contact Us. Please don\'t directly opened a request or case without informing us, or else, we will do some discounts on the warranty and other sales-services later on. Hope for your understanding.
Returns & Exchanges
▲All returns must be made within 14 days of delivery date. Items must be in new, unused condition, with all original materials included with the shipment. A partial refund may be applied for opened or damaged items, depending on the condition.
▲Items returned under the buyer’s remorse: The return shipping fee must be covered by the buyer; The original shipping cost will also be deducted from the refund. 15% restocking fee of the items purchase price will be charged.
▲Returns that are the result of our seller\'s error: Buyer will receive a full refund of the item as well as shipping charges
▲All returns require a RA (Return Authorization) number that will be given by our seller. Please contact with us at first for more details.
Defective & Damaged Products
▲If product was received damaged or not as described, please send us some pictures or videos, so we could well understand your problem, then solve them for you ASAP. Besides, it\'s much helpful for us to claim with UPS, remind our related department to pay much more attention to packaging later on. Hope for your understanding.
▲Replacement or refund of defective or damaged products can only be returned in exchange for the exact same product, or else, the purchase price will be refunded back to your original payment method.
▲If an item is received damaged, customer service must be contacted within 7 days of receiving your item. All returns require a RA (Return Authorization) number as above.
Payment
eCheck Issues:Payments via eCheck do not clear immediately. Usually you will wait 5-7 days after checkout for it to clear. Then we will arrange shipments for you.
Warranty & response
▲ 6 months\' warranty for the machines, not for the consumables. We stand behind our products all the item, so even if your warranty period has expired, you can still seek for service or technical support from us with low cost.
▲Any warranty shipping cost to us is responsible by buyer.
▲Any shipping cost to buyer is responsible by the seller.
▲We committee to the customer satisfaction and want to bring you the best purchase experience. If there is any problems, please contact us ASAP. If not, please leave us a positive response as it\'s very important for us. Thanks very much.
On Nov 4, 2026 at 00:05:07 PST, seller added the following information:
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.