51 AVR ATMEGA8 Programmer USBASP USB ISP Downloader 10 Pin USB

Features
The output port is an ATMEL standard port.
With overcurrent protection.
Automatic speed control.With power and write indicator lamp.
With USB power and target board support target voltage 5V, can choose by jumper cap connection.
Support Chip List:
51 Series：
AVR Series：
1.For windows users you will have to disable your driver verification to install the required drivers.
2.It is a 10pin connection.( you will need to make an adapter to 6 pin if using it for an Arduino Mega )
Instructions for use:
1. Plug in USBasp
2. Download Zadig from [zadig. akeo. ie]
3. Start zadig
4. Options - List all devices
5. Select USBasp from the drop down menu
6. Select libusbK(v3.0.7.0) driver
7. Click Install
Package included:
2pcs 51 AVR ATMEGA8 Programmer USBasp
2pcs 10P data cable

• NOYITO 51 AVR ATMEGA8 Programmer , Main Chip:ATMega8A-AU.Support AVR and ASP chip.Support AT89S51/52 microcontroller.
• The output port is an ATMEL standard port. With overcurrent protection.Automatic speed control.With power and write indicator lamp.With USB power and target board support target voltage 5V, can choose by jumper cap connection.
• Autospeed autofocus firmware, the downloader will automatically track the chip frequency to be programmed, automatically change the speed, to achieve automatic speed control.
• Reserve MOSI, MISO,RET,SCK,VCC,GND. 6pin interface, user-friendly interface to connect the target board.
• Reserved programming interface, the user can upgrade the download firmware.