50Amp Smart Load Manager Shed Module Control Board for Generac 7000 50Amp

1. Hardware Upgrade‌: Designed for ‌Generac 7000‌ series (50Amp 7000 and 100Amp 7006), this upgrade fully replaces the original ‌Generac Load Shed Module‌ or ‌50 Amp Smart Management Module‌. The enhanced power design ensures exceptional stability, significantly extending the lifespan of your ‌SMM (Smart Management Module)‌ system. 2.‌Software Upgrade‌: Precision-tuned for ‌Generac Load Shed Module‌, the firmware improves frequency measurement accuracy, delivering superior generator protection. Achieves finer control over load activation/deactivation for your Smart Management Module‌, optimizing energy distribution. 3.‌Cost and Time Savings‌: Retain your existing SMM (Smart Management Module)‌—no rewiring required. Simply swap the circuit board into the original housing (1-minute install), eliminating the need to replace the entire ‌Load Shed Module‌, saving both time and money. 4.Key Features‌: Prioritize critical circuits during outages using Load Manager‌ functionality. Supports up to 8 Smart Management Modules (SMMs)‌ for scalable, multi-load management. Load Shed Module‌-inspired lockout feature restricts non-critical loads when generator power is , ensuring uninterrupted supply to essential circuits. Combines the efficiency of a Smart Management Module‌ with cost-effective power management. 5.DIY Expandability‌: For advanced users, pair this control board with AC contactors and a housing to build a custom ‌50 Amp-200Amp Smart Management Module‌ compatible with Your SMM‌ systems
1. Hardware Upgrade‌: Designed for ‌Generac 7000‌ series (50Amp 7000), this upgrade fully replaces the original ‌Generac Load Shed Module‌ or ‌50 Amp Smart Management Module‌. The enhanced power design ensures exceptional stability, significantly extending the lifespan of your ‌SMM (Smart Management Module)‌ system. When powered on, the SMM (Smart Memory Module) will stop supplying power to the load. After a 5-minute wait, it will only resume power supply to the load if the power frequency is normal. If the grid frequency drops below the preset value during operation, the load will be turned off according to the settings to protect the generator.
2.‌Software Upgrade‌: Precision-tuned for ‌Generac Load Shed Module‌, the firmware improves frequency measurement accuracy, delivering superior generator protection. Achieves finer control over load activation/deactivation for your Smart Management Module‌, optimizing energy distribution.
3.‌Cost and Time Savings‌: Retain your existing SMM (Smart Management Module)‌—no rewiring required. Simply swap the circuit board into the original housing (1-minute install), eliminating the need to replace the entire ‌Load Shed Module‌, saving both time and money.
4.Key Features‌: Prioritize critical circuits during outages using Load Manager‌ functionality. Supports up to 8 Smart Management Modules (SMMs)‌ for scalable, multi-load management. Load Shed Module‌-inspired lockout feature restricts non-critical loads when generator power is , ensuring uninterrupted supply to essential circuits. Combines the efficiency of a Smart Management Module‌ with cost-effective power management.
5.DIY Expandability‌: For advanced users, pair this control board with AC contactors and a housing to build a custom ‌50 Amp-200Amp Smart Management Module‌ compatible with Your SMM‌ systems
Compatible with normally‑open and normally‑closed contactors. Select the operating mode via jumper caps. Default setting is for normally‑closed contactors. If the operating characteristics are reversed, reposition the jumper caps.