4pcs Mini-Circuits ADE JMS LRMS Mixer Development Evaluation PCBs Boards
$16.95

You are buying four PCBs designed for Mini-Circuits Surface Mount ADE, JMS and LMRS Series Frequency Mixers with \"ht\" and \"hu\" Connection. As well as RMS Series Mixers.
PCB Size: 1.12\" x 0.69\" x 0.062\"Material: FR-4Number of sides: double-sided with solid ground on the back.Finish: HASLConnectors: PCB will accept standard edge launch SMA connectors with 0.062 (1.6 mm spacing)
This PCB will fit Mini-Circuits ADE Series Mixer for following part number: ADE-1L, ADE-3L, ADE-1, ADE-1ASK, ADE-2ASK, ADE-3G, ADE-4, ADE-5, ADE-6, ADE-30, ADE-30W, ADE-1LH, ADE-1LHW, ADE-1MH, ADE-1MHW, ADE-12MH, ADE-25MH, ADE-35MH, ADE-42MH, ADE-1H, ADE-1HW, ADE-17H. For JMS series Mixer: JMS-1, JMS-2, JMS-2W, JMS-5, JMS-1LH, JMS-2LH, JMS-5LH, JMS-1MH, JMS-2MH, JMS-5MH, JMS-1H, JMS-2H, JMS-5H. All above Mixer with \"ht\" connection (LO=pin6, RF=pin3, IF=pin2, GND=pin1,4,5). RMS Series has almost 40 different models, too many to list here. Please refer to mini-circuits website for detail information.
Following Mixer with \"hu\" connection (LO=pin6, RF=pin2, IF=pin3, GND=pin1,4,5): JMS-11X, ADE-13.
Please note the following:1. Not all ADE series can use this PCB. For example the ADE-10H, ADE-12H,ADE-18,ADE-18W, ADE-18LH, ADE-20, ADE-35, ADE-R35LH, and ADE-901 pin-outs are different and will not fit since these parts use the98-PL-051footprint. Please check each mixer data sheet you plan to use, and verify the footprint orientation.2. PCB color may vary.
If you want to purchase just the board and connectors then see the link

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.