- Store
- New Arrivals
- Add to Favorite
- View response
- Contact
4Pcs IR Break Beam Sensor 5MM Leds Counting Module Distance Sensor Split Through-Beam Photoelectric Switch for Apply Relay, Cable Length 25Cm,Test Distance 30CMDescription Maximum Supply Voltage 5 volts_of_direct_current Output Type NPN Response Time 2 milliseconds Sensing Distance 1 meters Upper Temperature Rating 60 °C Number of Items 4 Unit Count 4 Count Included Components Break Beam Sensor Part Number IR Break Beam Sensor 30cm
IR Break Beam Sensor Specification:
Type: F5 with 2.54 terminal infrared through-beam sensor
Lamp: 5MM 850 launch
Light hole: 5MM
Launch tube power: 100 mA
Detection distance: 1M
Line length: 25cm
Lighting method: DC light
Launch angle: Normally 45 degrees, the angle varies with distance
Receiving angle: <10 degrees
Detection method: through-beam type
Working voltage: DC5V
Working current: 20A
Response time: 2ms
Transmitter/Receiver LED Angle
Working temperature:-25℃-60℃
Output mode: NPN normally open
Transmit: red wire=5VCC black wire=GND
Receive: red wire = 5VCC black wire = GND white wire = OUT (NPN)
Note: Do not reverse the positive and negative poles of the power supply
Package includes:
2X IR Break Beam Sensor -Receiver
2X IR Break Beam Sensor -Transmitter
- IR Break Beam Sensor adopt the principle of infrared beam splitting, it has ultra-fast 2ms response, which is better than traditional PIR sensors. Provides high sensitivity and fast motion detection to achieve accurate positioning without false triggering.
- Multifunctional Photoelectric Beam Sensor: With its flexible 3-5V operating range, this sensor draws power directly from your development board\'s pins—no external power supply or complicated regulators needed. Provides an NPN normally open signal output, making it fully compatible with various mainstream controllers and platforms.
- Easy to Install-Plug and Play: The IR sensor has built-in voltage regulation and 5V DC compatibility, and features an LED indicator for clear display of power and status. Wiring is simple and you can set up the photoelectric sensor in minutes without complex calibration.
- Simple Application: Clearly defined interfaces and simple wiring. Just add a 1K pull-up resistor between the signal wire and the positive pole to directly connect the I/O port of the microcontroller to achieve rapid project integration.
- Wide Application: Whether you\'re building an automatic product counter for a mini factory, adding safety limits to a 3D printer, creating a fun laser tripwire alarm or monitoring RPM, this 5MM through-beam photoelectric switch is your ideal component. It integrates seamlessly with Raspberry Pi and most PLCs for all your automation needs.
ABOUT US
We offer the best prices around on high quality products. Our E-store includes media such as books, movies, music and games while offering electronics, toys, sporting apparel, clothing, tools, general home, garden items and more.
SHIPPING
We are always working hard to ensure your package arrives as soon as possible. Please understand that some factors like weather, high postal traffic, and the performance of shipping companies are outside of our control.We offer free shipping to the lower 48 states and ship within 5 business days of payment, usually sooner. We do accept P.O. Box
RETURNS
We offer a 30-Day Return Policy on items which you are not completely satisfied with. You have the option for a full-refund or an exchange of the item. No returns are available on items shipped outside of the USA.
PAYMENT
We accept PayPal.
CONTACT US
This page content is yet to come
Please ad us to your favorite seller and visit again later
Thank You
CUSTOMER SATISFACTION
We try our very best to make sure every customer is completely satisfied. If there's a problem, message us! We're happy to help.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.