|
>> If you dont know how to design a userbar, then write here a Userbar that you want.
>> If you know how to design them help these people and design what they request.
|
 |
 |
USERBARS.org | Free Forum Userbars
| On eBay now |
4Pcs DC 24V Relay Module 2 Channel Relay Board with Optocoupler Support High or
$11.42

Product description Specifications: - Working Voltage: DC 24V
- Normally Opened Compatible Load: AC 250V/10A, DC 30V/10A
- Action Time (Under Rated Voltage): Less Than 10ms
- Release Time (Under Rated Voltage): Less Than 5ms
- Power Indicator (Green), Relay Status Indicator (Red)
Connection: Output Interface: - NO1: Relay Normally Open Interfaces , Relay Before Floating, Shorted Pull With COM1
- COM1: Relay Common Interface
- NC1: Normally Closed Port, COM1 Relay Shorted Before and After The Pull- Vacant
- NO2:Normally Open Relay Interface, Relay Before Floating , Pull Back and COM2 Short
- COM2: 2 Common Interface Relay
- NC2: 2 - Way Normally Closed Relay Interface Relay Short Front and COM2 , Pull Vacant Post
Input Interface: - DC +: Positive Power Supply DC 24V
- DC-: Negative Power Connection
- IN1: 1 Channel Signal to Trigger The End , You Can Set High or Low Level Control Relay
- IN2: 2 Channel Signal to Trigger the End , You Can Set a High or Low Level Control Relay
High or Low Level Trigger Select: - S1: High and Low Level Trigger for Channel 1
- S2: High and Low Level Trigger for Channel 2
- Low Level Trigger when “COM” Connecting “Low” to Short Circuit
- High Level Trigger when “COM” Connecting “High” to Short Circuit
Features: - Channel: 2 Channel
- Working Voltage: DC 24V
- Normally Opened Compatible Load: AC 250V/10A, DC 30V/10A
- Action Time (Under Rated Voltage): Less Than 10ms
- Release Time (Under Rated Voltage): Less Than 5ms
- Power Indicator (Green), Relay Status Indicator (Red)
- Module Size : 50mm * 26mm * 18.5mm (L * W * H);2”x 1”x 0.7”
- Friendly Interface Design. All Interfaces Can Be Connected Directly Via Terminal Wiring Leads.
Add to Cart Add to Cart Add to Cart Add to Cart Add to Cart Add to Cart Customer Reviews 4.6 out of 5 stars 231 4.6 out of 5 stars 269 4.4 out of 5 stars 42 4.5 out of 5 stars 32 4.8 out of 5 stars 49 4.3 out of 5 stars 14 Price $6.99$6.99 $6.99$6.99 $8.99$8.99 $8.99$8.99 $8.49$8.49 $8.99$8.99 Channel 1 Channel 1 Channel 4 Channel 8 Channel 8 Channel 8 Channel - 2 Channel Relay Module Voltage : 24V; Normally Open Interfaces Maximum Load : AC 250V/10A, DC 30V/10A
- 2 Channel Relay Module 24V Comes with High-Current Relay,Trigger Current : 5mA
- 24V Relay Module is 2 Channel Isolated, Each Relay Can Individually Switch On/Off by An Opto-Isolated Digital Input
- Relay Module Designed With Fault-Tolerant , Even If The Control Line Breaks, The Relay Will Not Move; With Optical Coupling Isolation,Triggering More Reliable and Stable
- 2 Channel Module Equipped With Screwed Terminal Plate and Fixed Bolt Holes,Standard Interface Can Connect With Microcontrollers and be Controlled by a Wide Range of Microcontrollers

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
|
|
|
 |
 |
|