4Pack 4 Channel 5V Relay Module with Optocoupler High or Low Level Trigger

Specifications:

Channel:4 channel

Working Voltage:DC 5V

Normally Open Compatible Load:10A 250VAC; 15A 125VAC; 10A 30VDC

Quiescent Current:5mA

Maximum Current:190mA

Trigger Current:2 - 5mA

Trigger Voltage(Low):0 - 1.5V

Trigger Voltage(High):2.5 - 5V

Insulation resistance: 100MΩ (500VDC)

Action time: less than 10ms

Release time: less than 5ms

Power indicator: Green

Relay status indicator: Red

Module Size: 73mmX50mmX18.5mm 2 x 4 Channel 5V Relay Module with Optocoupler Module

• ❃❃It is 4 Channel Isolated 5V 10A Relay Module for Arduino, AVR, PIC, ARM, DSP, etc;Each channel of the module can be set by jumper cap high or low level trigger
• ❃❃SMD optocoupler isolation, strong driving capability, stable performance; trigger current 5mA
• ❃❃Equipped with high-current relay, maximum load: AC250V 10A, 15A 125VAC, DC30V 10A
• ❃❃Relay Output: Normally Opened (NO) : normally open pin of relay. NO pin is not connect to COM pin when relay off.NO pin is connect to COM pin when relay on; Common pin (COM) : Common pin of the relay; Normally closed (NC) : normally close pin of relay.NC pin is connect to COM pin when relay off.NC pin is not connect to COM pin when relay on
• ❃❃High/Low Level Trigger:1. Low level trigger when jumper and L short circuit; 2. High level trigger when jumper and H short circuit