433MHz 4-Channel Wireless Remote Control Relay Switch Kit
Add wireless control to compatible lighting and DIY automation projects. Choose your preferred remote and range:
- Black Remote: up to 328 ft (100 m) in open space
- White Remote: up to 1,640 ft (500 m) in open space
Ranges are manufacturer-stated. Actual range varies with obstacles, interference, installation and remote battery independent relay channels with COM, NO and NC dry-contact outputs
433MHz wireless receiver with button-learning setupSupports compatible 1527 learning-code and 2262 fixed-code remotesStores up to 19 compatible remote controls according to the supplied specificationsMomentary, Toggle and Interlock modes, plus mixed-mode configurationsReverse-polarity input protection according to the supplied product input: DC 6–30V, as marked on the pictured receiver boardFrequency: 433.92MHzChannels: 4Remote buttons: 4Receiver case: approximately 3 × 2 × 1 inchesReceiver type: ASK superheterodyneOperating Modes
- Momentary: the selected relay stays on while the remote button is held.
- Toggle: press once to turn on and again to turn off.
- Interlock: activating one channel turns the previously active channel off.
- Mixed modes: use different operating modes on selected channels.
Installation and Compatibility
Check the receiver’s power-input marking, polarity and voltage-specific load limits before installation. Disconnect power before wiring. Motors and other inductive loads may require a properly rated external contactor.
Not every 433MHz remote is compatible: frequency and encoding must both match. Pairing and mode setup may be required before use.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.