40m IP67 Laser Distance Module L1s Sensor 1mm Accuracy for Construction Industry

Product Description Technical Parameter Product Brief Model L1s-40 Power Supply DC 5V Power Consumption 0.5W at 20Hz, less than 0.2W at standby System Startup Time 600ms Optical Device Parameters Wavelength:650nm Laser power:<1mW (Meet the Class II laser standards) Spot type: point laser Spot size: less than 4*6mm when 10m Working time: 20000 hours Communication Interface TTL UART Baud Rate 9600/19200/38400/115200 Baud,The default is 38400 A Serial Port Format Baud rate: 38400 Data bit: 8 Stop bit: 1 Check: none Flow control: none Network Communication Protocol Modbus_rtu
ASCII
Custom Hex Sampling Rate 10Hz, 20Hz, the default is 20Hz Resolution 1mm Accuracy ±（1.5mm+ D*5‱),D is the actual test distance. This theoretical error has been calibrated during production, and the actual
accuracy is ±1mm Repeat Accuracy ±1mm Working temperature -10—+50℃ Working Humidity ≤RH85% Protection Degree IP56 Cable Aerial cable Net Weight 55.6g Gross Weight 206g Dimensions 100*60*21*mm(Straight connector) 125*60*21mm(Bend connector) Note: *(1) With a strong reflector, a longer distance can be measured. The range value can be set through the downlink command, and the
maximum can be set to 80 meters.
*(2) In harsh environments, such as outdoor sunlight, the performance will be affected. It can be used with the target reflector
to improve performance. *(3) In the fast mode, the recovery light signal is weak, and the error will become larger, which has
certain requirements for the measurement target and distance. *(4) Not suitable for outdoor daytime applications.
*(5) Please do electrostatic protection before use.
*The power adapter and LED display can be customized. points distance) Height, Pythagorean theorem measurement. angle measuring, beep, and any other functions can be customized.
Applications