Free Userbar - Userbars - User Bar - User Bars
 
Advanced search
Registered users

Username:

Password:

Log me on automatically next visit?

¬ Forgot password
¬ Registration

» Upload Userbar
» Animate Userbar
» Userbars Tutorial
» Userbar Tournaments
» Forum
» Chat Room
» FAQ
» Links

• PC Cheat Codes

>> If you dont know how to design a userbar, then write here a Userbar that you want. >> If you know how to design them help these people and design what they request.




USERBARS.org | Free Forum Userbars

On eBay now
eBay

4 Gang Push Button Switch Panel RGB Backlit IP68 Waterproof 12V 24V 60A RV UTV

4 Gang Push Button Switch Panel RGB Backlit IP68 Waterproof 12V 24V 60A RV UTV
$127.10

Buy Now

4 GANG · RGB BACKLIT · IP65 Multifunction Switch Panel
& Relay Control System 12V / 24V DC · 720W · 60A · 4 Control Modes · 8 Colours

Four backlit buttons, four switching modes and one sealed relay box replace the tangle of toggle switches, inline fuses and loose wiring behind your dash. Water pump, reversing camera, work light and speaker — each on its own circuit, each labelled, all from one panel that looks factory-fitted.

WHY THIS ONE 4 independent circuits
Every button drives its own fused output on the control box — no daisy-chained taps. 4 programmable modes
Constant Light, Momentary, Flash and Strobe, set per button from the MODE key. 8 RGB backlight colours
Plus gradient and breathing effects — match the dash lighting instead of fighting it. Auto-dimming sensor
Brightens in daylight, dims after dark, so the panel never reflects in the windscreen. Memory on power-up
Remembers every button state and colour after the ignition is switched off. Backlight can be killed
Long-press ON/OFF for 3 seconds to go fully dark; short-press MODE to bring it back. Solid state relay + 60A breaker
Silent, arc-free switching with resettable overload protection instead of a fuse to replace. Complete 14-piece kit
Brackets, harness, leads, breaker, labels, ties and screwdriver — nothing else to buy. FOUR CONTROL MODES CONSTANT LIGHT
Press once to latch on, press again to release. The everyday setting for work lights, camp lighting and accessory power. MOMENTARY
Live only while the button is held. Made for horns, winches and air compressors — nothing stays powered by accident. FLASH
Repeating on-off pulse for indicators, hazard lighting or making the vehicle visible on site. STROBE
Fast strobe for recovery, escort and emergency lighting. The indicator above each button shows which mode is live. Short-press MODE to cycle the 8 backlight colours; long-press it to enter the mode setup for a single button; long-press it for 7 seconds to restore factory settings. SPECIFICATIONS Input voltage 12V / 24V DC (auto-detect) Max power 720W at 12V / 1440W at 24V Max current 60A total Panel buttons 4 function buttons + MODE + ON/OFF Panel size 133 × 41 mm (5.23 × 1.61 in) Ingress protection IP65 (panel and control box) Operating temperature -40°C to 85°C Relay Built-in solid state relay (silent, no arcing) Protection 60A resettable circuit breaker + inline fuse Backlight 8 colours + gradient + breathing, auto-dimming sensor Wiring Pre-terminated harness, labelled fuse positions, 25-piece hardware kit WHAT\'S IN THE BOX — 14 PIECES 1. Switch Panel
2. Circuit Control Box
3. Wire Harness
4. Mounting Brackets
5. Double-sided Tape
6. Screwdriver
7. Cable Ties (×10) 8. Inline Fuse Wire
9. Positive Lead
10. Negative Lead
11. Installation Kit (25 pcs)
12. Label Sheet (×2)
13. Instruction Manual
14. Retail Package Box FITS

Universal fit for any 12V or 24V vehicle or vessel: pickup, UTV & side-by-side, off-road & 4x4, car, truck, bus, boat and RV / motorhome.

INSTALLATION 1 Panel — fit the base plate to the back of the panel, then either stick it down with the supplied adhesive pad or bolt it to the dash with the bracket. 2 Control box — mount it in the engine bay or under the dash, vertically or horizontally. Leave a little slack in the harness so vibration is not carried into the box. 3 Power — positive lead to the battery, negative lead to the chassis. The 60A breaker sits between the battery and the control box; the panel can also be fed from an ACC tap so it is dead with the ignition off. 4 Accessories — terminate each circuit at the labelled fuse positions, then stick the supplied labels onto the buttons so every switch is identified at a glance. Before you connect
Add up the current draw of every accessory and keep the total under 60A. The panel and control box are IP65 — splash and rain resistant, but not designed for submersion, so do not mount the box where it will sit in water. Have winch and other high-current loads installed by an auto electrician if you are unsure about cable sizing. Check the 41mm panel height against your dash before ordering. SHIPPED FROM U.S. STOCK

Buy Now

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.


Related Userbars
       

More items on eBay

As an eBay Partner, userbars.org may earn a commission from qualifying purchases.



All userbars are property of respective authors.
Copyright © 2002 4homepages.de | Template © 2005 Bali Web Design