Free Userbar - Userbars - User Bar - User Bars
 
Advanced search
Registered users

Username:

Password:

Log me on automatically next visit?

¬ Forgot password
¬ Registration

» Upload Userbar
» Animate Userbar
» Userbars Tutorial
» Userbar Tournaments
» Forum
» Chat Room
» FAQ
» Links

• PC Cheat Codes

>> If you dont know how to design a userbar, then write here a Userbar that you want. >> If you know how to design them help these people and design what they request.




USERBARS.org | Free Forum Userbars

On eBay now
eBay

4-Cylinder Automotive GDI Ultrasonic Injector Cleaner Fuel Injector Tester Kit

4-Cylinder Automotive GDI Ultrasonic Injector Cleaner Fuel Injector Tester Kit
$311.99

Buy Now

ANCEL ANJ400 GDI Fuel Injector Cleaner TesterANCEL ANJ400 GDI Fuel Injector Cleaner Tester 4 Cylinder Ultrasonic Cleaning Machine For Car Motorcycle EFI FEI InjectorProfessional 4-cylinder fuel injector cleaner & tester, supports GDI piezo, EFI, FEI gasoline injectors. Built-in 100W ultrasonic cleaner, multi-voltage output, full test modes for leakage, flow, resistance, spray uniformity. Perfect for auto repair shops & motorbike maintenance.The ANCEL ANJ400 is a professional 4-cylinder integrated fuel injector maintenance machine specially designed for gasoline GDI piezo, EFI and FEI injectors. Combining 100W ultrasonic deep carbon cleaning and full-range performance testing functions, it solves common engine faults including rough idle, high fuel consumption, hard cold start and power loss. With dual voltage output (12V for standard injectors & 70V for GDI piezo injectors), solenoid valve pressure control and all-aluminum pressure plate structure, it is an essential tool for auto repair shops, motorcycle garages and automotive training schools.

Main functions

  • 1.Ultrasonic cleaning:To clean injectors to remove carbon deposition completely
  • 2.Resistance test:To test the resistance of the fuel injector
  • 3.Uniformity/spray test:To test the uniformity of injection quantity of each injector and monitor the spray status of each injector
    with the help of the backlight
  • 4.Leak test:To test the sealing and dribbling conditions of injectors under system pressure
  • 5.Injection flow test:to check the injection quantity of the injector in 15 seconds of constant injection
  • 6.Working modes test:To test injectors in different working conditions
  • 7.On-Vehicle Cleaning :Coming with a variety of disassembly-free cleaning connectors, the device can be used to perform on-vehicle cleaning and maintenance for various vehicle models.
  • 8.Low-resistance injector test function:Through the dedicated motherboard, support long and full low-resistance fuel injector test, such as 1 ohm
  • 9.Multiple item settings: Set different device parameters, including ringer sound level, screen brightness and backlight brightness
  • 10.Version information: To check the current device software version information
Working conditions & Specifications

Working conditions:
● Temperature: -10~+40°C Relative humidity: <85%
● Intensity of outer magnetic field: <400A/m
● No naked flame within 2m.

Specifications:
● Main unit power supply: 60Hz or AC110V±10%,60Hz
● Input power: 230W
● Ultrasonic cleaner power: 100W
● Resistance test accuracy: 0.1Ω
● Simulated RPM range: 100~9900rpm, step: 10rpm
● Time range: 5~300s, step: 5s
● Pulse width: 0.1~25ms, step: 0.1ms
● Fuel tank capacity: 2000ml
● Work pressure: 0-7bar

Package List Professional Functions

100W Ultrasonic Carbon Deposit Cleaning
High-frequency cavitation shock waves remove stubborn carbon and gum inside injector nozzles and needles without damaging precision piezo components, clean up to 4 injectors simultaneously.

High Precision Resistance Test
0.1Ω accurate resistance detection, supports long-time testing for low-resistance GDI piezo injectors, quickly identify coil open/short circuit damage.

Leakage Sealing Test
0-7bar adjustable working pressure simulates original vehicle fuel system, detect dripping and leakage injectors visually.

Quantitative Flow Test
Transparent measuring cylinders record 15s injection volume, compare flow balance of 4 injectors to locate cylinder misfire problems.

Spray Uniformity & Atomization Test
Backlight visual observation of spray angle and mist state, judge clogging, offset spray and poor atomization for luxury GDI vehicles.

Multi-Working Condition Simulation
Custom RPM 100-9900rpm, pulse width 0.1-25ms, test time 5-300s, simulate idle, medium/high speed and acceleration working conditions.

Dual Voltage Switch for GDI Injectors
One-button switch between 12V conventional injectors and 70V high-voltage piezo GDI injectors, compatible with all mainstream gasoline car brands.

Reverse Flushing & Custom Parameter Setting
Reverse washing to clear severely blocked injectors; adjustable buzzer volume, display brightness and firmware version check.

Superior Hardware Advantages vs Ordinary Injector Cleaners
  • Electronic solenoid valve pressure control instead of manual valve: stable pressure, long service life, tiny test error
  • Full aluminum alloy upper & lower pressure plates: lightweight, rust-proof and deformation-resistant
  • Hydraulic grade oil-resistant hoses: high pressure resistance, no leakage under long working hours
  • Independent 4-cylinder oil circuit: single cylinder test without data interference
  • Backlit digital control panel: clear data reading in dim workshop environment
  • Built-in overheat & overpressure safety protection system
Wide Compatibility
  • Cars: Mercedes, BMW, Audi, Porsche, Ford, VW, Toyota, Honda, Hyundai, GM etc........... all gasoline GDI & EFI models
  • Motorcycles: 4-cylinder EFI bikes from Ducati, Honda, Yamaha, Kawasaki
Notice: Only for gasoline injectors; diesel injectors support cleaning only, no full performance test.


Preparation
1) Remove the injector from the motorcycle engine to check the o-rings inside for damage. If it is damaged need to replace it. Put the outside of injector in gasoline or detergent, and wipe them with soft cloth after cleaning the outside fuel sludge carefully.
2) Check the test liquid level to be sure there are enough test liquid inside tank. Pouring test liquid from the port at the top left side of the unit and watch the liquid level in the fuel level viewer. In most cases, filled the liquid up to 1/2 of the tankcapacity.
3) Turn on the power switch on the right of the Cabinet.
4) Pour ultrasonic detergent into the ultrasonic cleaning basin so that the needle valve of the injector is covered by the detergent.
5) Connect the injectors with the right couplers.

• The main unit of the device uses test solution for uniformity / sprayability test, leakage test, injecting flow test and auto. test. The ultrasonic cleaner uses the cleaning agent. Test solution and cleaning agent are not included in the standard configuration and can be purchased separately.

Cleaning & testing sequences
Recommended to carry out the complete cleaning and testing procedures as the following order.
● Ultrasonic cleaning;
● Uniformity / Sprayability test;
● Leakage test;
● Injecting flow test;
● Working modes test.

Procedure after work operation
1) Drain test solution to a fuel container.
2) Switch off the power switch and unplug the power plug.
3) Use a fuel header to suck all cleaning agent in the ultrasonic cleaning pool, and wipe the pool with a soft dry cloth.
4) Wipe the table top of the machine with a soft dry cloth.
5) To avoid volatilization, all the test solution in the fuel tank should be discharged. If it can be used again, store it in a safe place. If it is dirty and cannot be used anymore, dispose it according to relevant regulations.

Troubleshooting & Precautions

1.1 Troubleshooting
• The unit does not correspond when it is switched on.
• Check the fuse at lower right side ofthe unit and replace it ifit is damaged or broken.
• There is leakage in the fuel separator coupler.
• Fuel leaked at coupling element of fuel separator. Please check whether the “O” ring installed matches and if it deformed or damaged. Ifit does not match or is damaged, please change it. The two black adjusting screws should not be too tight, which may also cause the coupling element offuel separator to leak fuel.
• The used machine has not been used for along time about several months, and it is found that the pump cannot work normally.
• The type oftest liquid used is not suitable, which will lead to poor internal signal ofthe pump after along time ofnon-use. Use the electrical shock method and tap the pump as needed to resume normal operation.

1.2 Precautions
• In order to avoid electric shock, keep away from the damp part of a working unit and avoid exposing it to the rain.
• To ensure operation safety, please make sure that equipment has been connected to ground well.
• Do not operate equipment with a damaged cord or if the equipment has been dropped or damaged until it has been examined by qualified service personnel.
• Equipment use is strictly prohibited fireworks, and posted “No smoking” and “Flammable hazard warning” signs.
• Please operate the unit according to the operation procedures in the manual. Only use the accessories recommended by the manufacturer.
• ALWAYS WEAR SAFETY GOGGLES. Common used glasses are NOT safety glasses.

FAQ
Q1: Can it test diesel injectors?
A: Only gasoline injectors are fully supported. Diesel injectors can only be ultrasonically cleaned without flow, pressure and resistance testing.
Q2: How many injectors can be tested at once?
A: Support 1-4 injectors independent testing, no need to fill all 4 positions.
Q3: What liquid to use for cleaning & testing?
A: Special injector cleaning fluid for washing; industrial alcohol for flow test, DO NOT use gasoline directly.

PaymentShippingTerms of salesAbout usContact usPayment

- We accept all common forms of payment such as Credit cards、Debit card ,Google Pay ,Visa etc.

- Payment should be made within 7 days after offerding ends. Otherwise a Unpaid Item case will be opened to you.

Shipping

Will usually ship within 1 business day of receiving cleared payment .( Excluding weekends and holidays)1. Ship from USA local warehouse via UPS or USPS shipping . Delivery time varies from 2 to 5 business days (Excluding holidays and weekends) !2. We will ship according to your address. Please make sure it is correct and include phone number for delivery.

3. Ship to HI, PR, AKand other overseas states and other countries requires payment of courier fees.

4. PO.BOX address delivery is not supported.

- We are not responsible for buyers’ local taxes & Customs / import tax.

If you do not receive your order in the estimated time, please contact us, we would do our best to serve you solve the problem.

Terms of sales

We are authorize distributor, our all items are 100% original and Our devices have warranty,

- 12 months free repair for the devices.

- 60 days free return service .

- About Free return and get labels . Please click 【Return this item】- select the return reason 【Don’t like it】 or 【Doesn\'t fit】 to initiate a return, we\'ll buy the label for you right away , or contact us before you open a return reuest. According to return policy , 100% of the return shipping costs for the above return reasons will be covered by us !

Please contact us firstly when you need warranty service and free return service .

In case an item arrives faulty, please contact us in 30 days and keep it unused.

We will instruct you on how to return and get refund or replacement.

If after 30 days, or the item has been used, we have the right to decline your claim.

Items should be returned on buyers’ cost for repair or replacement.

About us

WHO WE ARE?
We are authorize distributor for many manufatcurers. We guarantee all items are 100% original .

WHAT WE HAVE?
We have over 4 warehouses that are located in US. Fast delivery .

WHAT WE SELLING ?
We is mainly deals in various types of professional car diagnostics scanners and other car service maintenance tools.

For example --- Passenger car scanner , Diesel Commercial scanner ,Motorcycle scanner , Mile-agecorrection tool , Key programming tool , Smoke test , Electrical system probe test ,Battery tester ,injector cleaner etc .

Contact us

Our customer-oriented service strives for positive responses with all 5 star selling ratings.

Please feel free to contact us via message once you have any question before you giving us negative response or open case.

We will reply in 24 business hours.

Business time: GMT8 (9:00-18:00) from Monday to Friday.

On Jul 10, 2026 at 09:15:18 PDT, seller added the following information:

Buy Now

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.


Related Userbars
       

More items on eBay

As an eBay Partner, userbars.org may earn a commission from qualifying purchases.



All userbars are property of respective authors.
Copyright © 2002 4homepages.de | Template © 2005 Bali Web Design