Free Userbar - Userbars - User Bar - User Bars
 
Advanced search
Registered users

Username:

Password:

Log me on automatically next visit?

¬ Forgot password
¬ Registration

» Upload Userbar
» Animate Userbar
» Userbars Tutorial
» Userbar Tournaments
» Forum
» Chat Room
» FAQ
» Links

• PC Cheat Codes

>> If you dont know how to design a userbar, then write here a Userbar that you want. >> If you know how to design them help these people and design what they request.




USERBARS.org | Free Forum Userbars

On eBay now
eBay

3Pcs STM32F411 Development Board STM32F411CEU6 STM32F4 Core Learning System B...

3Pcs STM32F411 Development Board STM32F411CEU6 STM32F4 Core Learning System B...
$27.70

Buy Now

Memory:
256 Kbytes of Flash memory
128 Kbytes of SRAM
SPI Flash (Optional)

Clock and power supply
3.3V-5V power input, 3.3V LDO maximum output current 100mA
USB C interface is used, and a diode is serial to prevent power backflow
25MHz 9PF high speed crystal oscillator
32.768K 6PF low speed crystal oscillator

Interface and Key
USART x 3, I2C x 3, SPI x 5,USBFS x 1
ADC x 1(10),I2S x 5,CRC x 1,TIM x 8
20 Pin 2.54mm pitch I/O interface x 2
4 Pin 2.54mm pitch SW debug interface x 1
USB C (Type C) interface x 1
User keys Key (PA0) x 1
Reset key NRST x 1
Boot0 key x 1

How to enter ISP (serial port /USB download)
Method 1:
Press Boot0 and NRST at the same time and release NRST. After 0.5s, release Boot0 and enter ISP mode
Method 2:
In the power off state, press Boot0, power on, wait for 0.5s, release to enter ISP mode
Serial port download: use USB to serial port to connect the core board PA9,PA10 can be, do not use USB port power supply
USB download: use the data cable to connect to the computer, if there is no identification problem,The chip can be properly heated (25°C+),then re-entering ISP mode
STM32CubeProg, Weact Studio Download Tool (see Github/WeActTC/MiniSTM32F4x1/Soft/)
No USB to serial port, no debugger, no computer driver, just a Type-C data line can complete the firmware download
1. Burn HID IAP firmware (the factory program brushes in by default, which is a special testversion)
2. Press the KEY KEY to power up or press the KEY to reset, LED C13 flashes, release the KEY to enter
3. Confirm APP firmware address is 0x8004000, interrupt address offset is 0x4000
4. Download it using
Package include:
3 x STM32F411CEU6 Core Board


User-friendly design with 20-pin I/O, SWD debug interface, and KEY, NRST, BOOT0 buttons for easy operation and programming
Powerful ARM Cortex-at 100MHz with 256KB ROM and 128KB RAM for high-performance, seamless embedded development
Versatile connectivity via USART, I2C, SPI, and USBFS, plus an FPU for efficient floating-point calculations in complex projects
Enhanced with SPI Flash for extra storage, 12-bit ADC, and a precise 32.768kHz oscillator for accurate timing and measurements
Stable 3.3V-5V power input with LDO, USB-C protection, and dual crystal oscillators ensuring reliable performance

Buy Now

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.


Related Userbars
       

More items on eBay

As an eBay Partner, userbars.org may earn a commission from qualifying purchases.



All userbars are property of respective authors.
Copyright © 2002 4homepages.de | Template © 2005 Bali Web Design