3PCS LED Lighted Rocker Switch 12V ON Off Switch (Mixed Color)

LED Lighted Rocker Switch 12V 30A SPST 3 Pin ON Off Car Boat RV 3 Pack Mixed3-Pack LED Lighted Rocker Switch 12V 30A SPST ON Off for Car Truck RV Boat Motorcycle Marine⟡ DESCRIPTION

Upgrade your vehicle or vessel with these LED lighted rocker switches built for reliable 12V DC circuits. This 3-pack includes one red, one blue, and one green illuminated rocker switch, each rated at 30A and 12 volts, so you get a full set of color-coded controls right out of the box. Each switch uses an SPST (single pole single throw) configuration with a normally open contact type, and the built-in LED lights up clearly the moment the switch is activated, giving you instant visual status response at a glance. The nickel-plated copper pins deliver excellent electrical conductivity, while the flame-retardant PA66 plastic housing protects against heat and short circuits. Built-in overload and reverse polarity protection keep your system running stable across a rated lifespan of up to 10,000 ON/OFF cycles.

Installation is straightforward — each 12V rocker switch fits a standard 0.47-inch (12mm) panel mounting hole. Simply insert, connect, and secure with the nut-mount design that locks tight and resists loosening even under heavy vibration or rough road conditions. These lighted rocker switches are widely used in cars, trucks, ATVs, UTVs, SUVs, RVs, motorcycles, and marine boats, and work great for controlling LED light bars, LED work lights, and auxiliary lighting upgrades. Each switch must be wired according to the included wiring instructions to ensure correct LED function and prevent damage. (Also known as an illuminated rocker switch or lighted toggle switch, this listing covers one specific 3-pack set.) Wire the 3rd pin to earth to activate the LED indicator.

⟡ KEY FEATURES🔹3-Pack Mixed LED Colors — Includes one red, one blue, and one green lighted rocker switch so you can color-code multiple circuits at a glance🔹12V 30A SPST Rated — Designed for DC 12-volt circuits at 30 amps, making these switches suitable for LED light bars, auxiliary lights, and work lights🔹Instant Visual response — The built-in LED illuminates the moment the switch is turned on, giving you clear on/off status at all times🔹Nickel-Plated Copper Pins — Superior electrical conductivity and corrosion resistance for long-lasting, stable performance across demanding environments🔹Flame-Retardant PA66 Housing — The plastic body is made from flame-retardant PA66 material, adding an important layer of thermal and fire safety🔹Built-In Circuit Protection — Integrated short-circuit, overload, and reverse polarity protection safeguard your vehicle wiring and connected accessories🔹Easy Panel Installation — Fits a standard 0.47-inch (12mm) mounting hole with a nut-mount design that locks securely and resists vibration-related loosening🔹Wide Vehicle Compatibility — Suitable for cars, trucks, ATVs, UTVs, SUVs, RVs, motorcycles, and marine boats, with a rated lifespan of up to 10,000 cycles⟡ SPECIFICATIONSPack Quantity3 pieces (1 red, 1 blue, 1 green)Operating Voltage12V DCCurrent Rating30AWattage360WSwitch TypeRockerConfigurationSPST (Single Pole Single Throw)Contact TypeNormally OpenOperation ModeON-OFFNumber of Terminals3-PinMounting TypePanel MountMounting Hole Size0.47 inch (12mm)Housing MaterialFlame-Retardant PA66 PlasticContact MaterialNickel-Plated CopperCircuit Type1-WayRated LifespanUp to 10,000 ON/OFF cyclesPart NumberSixzoo-LRS-01⟡ COMPATIBLE MODELS✓Car (all standard 12V DC vehicles)✓Truck✓RV (Recreational Vehicle)✓Motorcycle✓Marine Boat✓ATV (All-Terrain Vehicle)✓UTV (Utility Task Vehicle)✓SUV✓Wrangler⟡ PRO TIPS01Wire the 3rd pin (LED pin) to a ground/earth connection — this is required for the LED indicator to illuminate when the switch is turned on. Follow the included wiring instructions exactly to avoid damage.02Use the color-coded switches intentionally: for example, assign red to lights, blue to a fan circuit, and green to a horn or auxiliary accessory, so your panel is easy to read at a glance.03Before installation, verify your circuit does not exceed 30A at 12V. — These switches are rated for 30A, so always match or stay below that load rating for safe, reliable operation.04The nut-mount design is your best defense against vibration. — Make sure the securing nut is tightened firmly after inserting each switch into the panel hole to prevent rattling or loosening on rough terrain.05If you are running these switches on an LED light bar or auxiliary light upgrade, use a relay in line with each switch for high-draw circuits — the switch controls the relay trigger, not the full load, extending its 10,000-cycle lifespan significantly.⟡ IDEAL FOR◆Off-road vehicle builds requiring durable panel-mount controls◆Marine and boat electrical upgrades with clear on/off indicators◆RV and camper van auxiliary lighting installations◆Truck and SUV LED light bar wiring setups◆Motorcycle handlebar panel or dash switch modifications◆ATV and UTV accessory control panel projects◆Automotive LED work light and auxiliary light control◆DIY 12V electrical projects needing SPST rocker controls◆Vehicle dashboard custom switch panel builders◆Garage and workshop 12V DC power control setups◆Automotive electricians building custom wiring harnesses◆Hobbyists upgrading older vehicle electrical systems with modern LED indicators⟡ SHIPPING & RETURNSShipping: Most orders ship within 2-3 business days. Handling time can vary by item, so please check the estimated delivery date shown on this page before placing your order.Shipping Cost: Most of our items ship free with no hidden fees. Some heavy or oversized items may have a shipping charge, so please check the shipping cost shown on this listing before placing your order.Returns: Most of our items come with free 30-day returns. Some items are not eligible for return, so please check the return policy shown on this listing before placing your order.Premium Quality Products | Carefully Packed | Trusted Seller