Free Userbar - Userbars - User Bar - User Bars
 
Advanced search
Registered users

Username:

Password:

Log me on automatically next visit?

¬ Forgot password
¬ Registration

» Upload Userbar
» Animate Userbar
» Userbars Tutorial
» Userbar Tournaments
» Forum
» Chat Room
» FAQ
» Links

• PC Cheat Codes

>> If you dont know how to design a userbar, then write here a Userbar that you want. >> If you know how to design them help these people and design what they request.




USERBARS.org | Free Forum Userbars

On eBay now
eBay

[3DMakerWorld] Adafruit Feather RP2040

[3DMakerWorld] Adafruit Feather RP2040
$28.29

Buy Now

Key Features

  • RP2040 32-bit Cortex M0+ dual core running at ~125 MHz @ 3.3V logic and power & 264 KB RAM
  • 8 MB SPI FLASH chip for storing files and CircuitPython/MicroPython code storage. No EEPROM
  • Built-in 200mA+ lipoly charger with charging status indicator LED; RGB NeoPixel for full-color indication & Pin #13 red LED for general purpose blinking
  • 12 MHz crystal for perfect timing.
  • USB Type C connector lets you access built-in ROM USB bootloader and serial port debugging

A new chip means a new Feather, and the Raspberry Pi RP2040 is no exception. When we saw this chip we thought \"this chip is going to be awesome when we give it the Feather Treatment\" and so we did! This Feather features the RP2040, and all niceties you know and love about Feather.

Inside the RP2040 is a \'permanent ROM\' USB UF2 bootloader. What that means is when you want to program new firmware, you can hold down the BOOTSEL button while plugging it into USB (or pulling down the RUN/Reset pin to ground) and it will appear as a USB disk drive you can drag the firmware onto. Folks who have been using Adafruit products will find this very familiar - we use the technique on all our native-USB boards. Just note you don\'t double-click reset instead hold down BOOTSEL during boot to enter the bootloader!

The RP2040 is a powerful chip, which has the clock speed of our M4 (SAMD51), and two cores that are equivalent to our M0 (SAMD21). Since it is an M0 chip, it does not have a floating point unit or DSP hardware support - so if you\'re doing something with heavy floating-point math, it will be done in software and thus not as fast as an M4. For many other computational tasks, you\'ll get close-to-M4 speeds!

Item Specifics

  • Dual ARM Cortex-M0+ @ 133MHz
  • 264kB on-chip SRAM in six independent banks
  • Support for up to 16MB of off-chip Flash memory via dedicated QSPI bus
  • DMA controller
  • Fully-connected AHB crossbar
  • Interpolator and integer divider peripherals
  • On-chip programmable LDO to generate core voltage
  • 2 on-chip PLLs to generate USB and core clocks
  • 30 GPIO pins, 4 of which can be used as analog inputs
  • Peripherals
  • 3.3V regulator with 500mA peak current output
  • Measures 2.0\" x 0.9\" x 0.28\" (50.8mm x 22.8mm x 7mm) without headers soldered in
  • Weight: 5g

Note: Updated with a right-angle tactile button for the Bootloader switch, so that you can press it even when a \'wing is on the Feather. We have also connected the boot button to GPIO #4 so it can be used as a user-input button

Buy Now

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.


Popular Userbars
       

More items on eBay

As an eBay Partner, userbars.org may earn a commission from qualifying purchases.



All userbars are property of respective authors.
Copyright © 2002 4homepages.de | Template © 2005 Bali Web Design