[3DMakerWorld] Adafruit 2x20 pin IDC Box Header - Raspberry Pi A+/B+/Pi 2/Pi 3
$16.10

Key Features:
- Matching connector for Adafruit's 40-pin GPIO Cable
- Run a GPIO cable from your Pi A+/B+/Pi 2/Pi 3 and Pi 4 to the socket
- Same socket that comes with our Pi Cobbler Plus or Pi T-Cobbler Plus
- Works for the Raspberry Pi Model A+/B+/Pi 2/Pi 3 GPIO cables
This handy 2x20 IDC Box Header is the matching connector for our 40-pin GPIO Cable. By soldering this onto perf board you can run a GPIO cable from your Pi A+/B+/Pi 2/Pi 3 and Pi 4 to the socket.
This is the same socket that comes with our Pi Cobbler Plus or Pi T-Cobbler Plus but without the PCBs or anything. It only works for the Raspberry Pi Model A+/B+/Pi 2/Pi 3 GPIO cables.
Item Specifics
Size: 9mm x 58mm x 12mm / 0.35" x 2.3" x 0.5"
Weight: 4.6g
Does not work with the Raspberry Pi Model B GPIO cables
Does not include any cables or PCBs

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.