Universal Resource Trading Ltd3D Systems ProJet 460Plus CJP Full-Colour 3D Printer, Consumables & Spares
Item condition: Used
3D Systems ProJet CJP 460Plus 3D Printer
This item was removed from a university laboratory where it was surplus to requirements.
It is in good cosmetic condition with some staining present.
Powers on, goes through initialisation stages and shows \"Online\" message, tested a few functions such as raising and lowering the stage, and vacuum which all worked fine.
Previous owner states it is fully functional. No test prints have been carried out. Will require a new HP11 print head and a new binder cartridge soon (previous owner states there is still enough binder to print head to install when ready to print.
Approximately 7Kg of PXL core material.
7 x spare waste trays
Box of accessories, including:
cleaning solution.
Software - 3D print
Various tools and maintenance speed: between 2 to 4 layers per minute
Build volume:
X-axis: 8 inches (203 mm)
Y-axis: 10 inches (254 mm)
Z-axis: 8 inches (203 mm)
Build capacity: 640 cubic inches
Layer thickness:
Minimum: 0.0035 inches (0.089 mm)
Maximum: 0.004 inches (0.102 mm)
Color shell thickness: 0.025 inches
Resolution: 300 x 450 zp130
Binder: zb59
Print heads:
HP11 (clear binder)
HP57 (single tricolor CMY)
NOTE: No cables, remotes, accessories, power supplies, consumables or any other item is included unless shown in the item photo or is in the item description.
Item DetailsPropertyValueTested valuePart / Catalogue NumberN/AContains LaserNo1. PAT TestElectrical SupplyN/A1-PhasePlug Included? (1-Phase)N/AYes - Standard UK 3-Pin Mains Plug (BS 1363)PAT Test ResultN/APassPAT Test DateN/A26-01-2026VoltageN/A240V3. Recertification Initial ChecksOverall Cosmetic ConditionN/AAverage6. Safety FeaturesEmergency Stop Safety CheckN/AN/A7. Service DetailsLast Service DateN/AUnknown
This item is only suitable for pallet delivery. Delivery will be made to kerbside only, unless otherwise confirmed in writing. The listed price is for economy delivery (3-5 working days) to mainland UK addresses excluding Northern Ireland and the following postcodes, where surcharges may apply - please enquire before ordering.
AB31-38, AB40-52, AB54-56, AB63 IV1-28, IV30-32, IV36-56, IV63, KA27-28, KW1-17, PA20-38, PA41-49, PA60-78, PH4-44, PH49-50, PO30-41, TR21-25, BT, GS, GY, HY, IM, JE, TDCU, ZE International buyers
Therefore please contact us so we can discuss what other costs you may incur with shipment such as import VAT and customs duties. In some cases, we may need to apply for export licenses which can take some time; we can advise on time-scales.
It is always best to contact us for a quote/timescale prior to ordering, as in some cases we may be able to offer reduced postage costs and/or other options.
You are also welcome to arrange your own courier subject to regulatory and documentation requirements.
For international orders where we ship to you our default Incoterms are DAP unless otherwise agreed.
Return Policy
Buy with confidence. If you wish to return the item, for whatever reason, you may do so within 45 days.
VAT and Purchase Orders
In some cases we may be able to zero rate the VAT for charity-funded equipment and other exemptions. Please enquire for further details.
For all buyers outside of the UK, the price shown is exclusive of VAT. For any uncertainties, please contact us before offerding.
Universities and colleges - purchase orders accepted - please contact us.
SKU: ITEM-51203
About Us
We are a family business located and have been involved in the resale of surplus items for over three decades.
We sell surplus equipment and items on behalf of a large companies, research institutes and universities.
All of our products are collected by our team as assets for resale - and come straight out of an office, laboratory or other working environment.
We do not source any items from waste disposal. Therefore you can be confident in our products.
_gsrx_vers_1706 (GS 9.9 (1706))Item condition: Used 3D Systems ProJet CJP 460Plus 3D PrinterThis item was removed from a university laboratory where it was surplus to requirements.It is in good cosmetic condition with some staining present.Powers on, goes through initialisation stages and shows \"Online\" message, tested a few functions such as raising and lowering the stage, and vacuum which all worked fine.Previous owner states it is fully functional. No test prints have been carried out. Will require a new HP11 print head and a new binder cartridge soon (previous owner states there is still enough binder to print).Included;HP57 print head to install when ready to print.Approximately 7Kg of PXL core material.7 x spare waste trays Box of accessories, including:cleaning solution.Software - 3D printVarious tools and Recommended products Provided by 3D Systems ProJet 660Pro Colour 3D Printer with VisiJet PXL Clear, Krylex KI001 View product Stratasys EDEN260V 3D Printer Spares/Repairs View product ProJet MJP 3600 3D Printer MultiJet Printing View product Objet Eden 260V 3D Printer Spares/Repair View product Creality CR-10 Max 3D Printer Spares/Repair View product Z Corporation ZPrinter 450 3D Printer Spares/Repair Lab View product Stratasys Dimension Elite 3D Printer PN - 180-00105 Spares/Repairs View product RSPro iTX-3D Printer & KORA SC-01 Safety Cabinet View product
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.