新建网页 1
350L Constant Temperature and Humidity Incubator 220V
The constant temperature and humidity incubator can control the high and low temperature and humidity, and is used to simulate the environmental temperature and humidity. It is widely used in textile, food processing, biological culture, physical analysis and other tests and various temperature and humidity tests of industrial products.
Features
1. The shell of the product is made of high-quality steel plates, the surface of the shell is firmly painted by electrostatic spraying, and the appearance is beautiful. The working chamber is made of high-quality stainless steel plates, so it is resistant to corrosion and aging. The periphery of the inner container adopts circular arc transition, and a toughened glass door is arranged inside the inner container.
2. The functions of printer, 485 interface, U disk storage, SMS alarm and so on can be additionally set.
3. The Brand compressor achieves fluorine-free and environmentally friendly refrigeration and breeze circulation to ensure uniform temperature inside the box.>
4. Balanced control over cooling and heating ensures small temperature fluctuation and more accurate temperature control.
5. The independent glass front door observation window is transparent and beautiful, which is convenient to observe the changes of the items in the box. The magnetic rubber seal is used, and the door is easy to open and good in sealing performance.
6. Ultrasonic humidification is adopted, the humidification and temperature control are stable, the humidity fluctuation range is ±5-8℃RH, and the machine has a water shortage and power off function to prevent the machine from burnout due to water shortage.
7. The machine has multiple safety measures, such as compressor overheat protection and instrument failure protection, to ensure the safety of the tests.
Parameters
Model
HSP-350B
Power supply
220V 50HZ/60HZ 1PH
Power
1200W
Volume
350L
Temperature range
0-65℃
Temperature resolution
0.1℃
Humidity range
50-90%RH
Note
The above temperature and humidity parameters can be measured at the no-load temperature of 28℃ and humidity of 65%RH.
Precautions
1. For the safety of the tests, please install the external grounding device, select the power supply matched with the equipment and install the leakage protection device.
2. It is strictly prohibited to use the equipment for the tests of inflammable, explosive, poisonous and strongly corrosive materials.
3. Place the equipment on the dry platform or ground, and keep it 50CM or above away from the wall.
4. Put the tested items on the tray as required, turn on the power, turn on the switch, and set the required temperature according to the operation instructions of the intelligent instrument.
5. Turn off the power when the equipment is not in use, and keep it dry and clean.
6. Please read the instruction of this product carefully before operation.
Details
CONTROL PANEL
The machine adopts the intelligent microcomputer LCD control system and has the functions of timing, alarm, over-temperature protection, etc. The 30 sections of temperature and humidity setting and automatic switching fulfill the function of simulating the environmental temperature and humidity.
OBSERVATION WINDOW
The independent glass front door observation window is transparent and beautiful, which is convenient to observe the changes of the items in the box. The magnetic rubber seal is used, and the door is easy to open and good in sealing performance.
INNER CONTAINER
The stainless steel inner chamber is durable, corrosion-resistant, and easy to clean. Its adjustable shelves allow flexible configuration to suit various sample sizes and container types, optimizing interior space utilization and enhancing overall workflow efficiency.
Heat Emission Hole
The machine is designed with ventilation openings that effectively dissipate excess heat generated during operation, preventing overheating and protecting the unit. Combined with an efficient air circulation system, it ensures uniform temperature and humidity distribution throughout the chamber, providing a stable and consistent environment for sample cultivation.
Humidifier
Equipped with an external ultrasonic humidifier, it delivers smooth and efficient humidification with good humidity uniformity. The separate design keeps the humidifier independent from the main unit, preventing excess heat from affecting temperature control during the humidification process. The humidity control range is 50–90% RH, and it features a water-shortage power-off protection to prevent dry burning, ensuring safe and stable sample conditions.
Operating Instructions
1. Overview
The controller adopts the temperature self-adaptive control technology for temperature control, and can be used to simulate the natural environment (temperature and humidity).
The power supply of the humidifier must be connected to the humidifier socket at the bottom of the left side of the box body. The humidifier shall be connected to the left side of the box body with a hose. Humidification shall start when the temperature reaches the set temperature. The humidifying function does not start when the temperature rises for the first time.
2. Functional specification
The system will return to the main page without operation within 30s. The buzzer will ring for 30s after the operation ends. When the buzzer rings, click any key to silence the sound.
3. Set the state
Turn on the power switch for about 3 seconds, the machine can normally display the temperature. The corresponding window of SV displays end, long press the \"increase\" key for about 2 seconds, and the machine will normally operate.
On the page of machine operation, click \"Set key\" to enter the setting state of cycle and number of segments. The set value of cycle flashes and can be modified by the \"increase key\" or \"reduce key\" (the cycle is generally set to 0 cycle). Press the \"Set key\" again, and the set value of the number of segments flashes and can be modified by the \"increase key\" or the \"reduce key\". Press the \"Set key\" again to enter the setting state of each period of time, temperature and humidity, and the corresponding value can also be modified by the \"increase key\" or \"reduce key\". After setting the corresponding period, number of segments, temperature, humidity and time, click the set key to save and exit, and then the machine starts to run.
In the setting state, click the return key to return to the setting of the previous parameter, and the selected parameter value will flash and be displayed. Short press the exit or set key to exit the setting state, save parameters and power failure memory.
Note: One cycle means that the controller runs from the first segment to the Nth segment (the number of segments required by the customer) for one cycle. When the cycle is set to 0, it means that the controller is located in the continuous working state.
Item Included (148052)
Constant Temperature and Humidity Incubator 350L 220V
新建网页 3
Shipping & Handling Details
Default Shipping Cost or Free Shipping Information:
▲Default shipping cost or free shipping service is only for the lower 48 United States by UPS Ground or USPS. Other areas or needs other shipping ways, please contact us.
▲Buyers from Guam, Puerto Rico, Virgin Islands, American Samoa, Alaska, Hawaii, PO Boxes, APO/FPO addresses or other countries/areas,there WILL be extra shipping costs, please contact us for more detailed information.
▲Please make sure your address is valid for both UPS and USPS services. Any costs incurred because of incorrect or undeliverable address should be undertaken by buyer.
Handling Time:Shipping is usually made in 1-3 business days after payments cleared. Orders are processed fromMonday-Friday; Not on the weekends & public holidays.
Sales tax / Customs duties:Any sales taxes or Customs duties are not included. If came out, they must be undertaken by the buyer.
Damage In Shipping:Email or call us First! We will work with you to get the case resolved in the fastest method.
Return / Refund
If you are not 100% happy with your purchase, please contact Us. Please don\'t directly opened a request or case without informing us, or else, we will do some discounts on the warranty and other sales-services later on. Hope for your understanding.
Returns & Exchanges
▲All returns must be made within 30 days of delivery date. Items must be in new, unused condition, with all original materials included with the shipment. A partial refund may be applied for opened or damaged items, depending on the condition.
▲Items returned under the buyer’s remorse: The return shipping fee must be covered by the buyer; The original shipping cost will also be deducted from the refund. 15% restocking fee of the items purchase price will be charged.
▲Returns that are the result of our seller\'s error: Buyer will receive a full refund of the item as well as shipping charges
▲All returns require a RA (Return Authorization) number that will be given by our seller. Please contact with us at first for more details.
Defective & Damaged Products
▲If product was received damaged or not as described, please send us some pictures or videos, so we could well understand your problem, then solve them for you ASAP. Besides, it\'s much helpful for us to claim with UPS, remind our related department to pay much more attention to packaging later on. Hope for your understanding.
▲Replacement or refund of defective or damaged products can only be returned in exchange for the exact same product, or else, the purchase price will be refunded back to your original payment method.
▲If an item is received damaged, customer service must be contacted within 7 days of receiving your item. All returns require a RA (Return Authorization) number as above.
Warranty & response
▲6 months\' warranty for the machines, not for the consumables. We stand behind our products all the item, so even if your warranty period has expired, you can still seek for service or technical support from us with low cost.
▲Any warranty shipping cost to us is responsible by buyer.
▲Any shipping cost to buyer is responsible by the seller.
▲We committee to the customer satisfaction and want to bring you the best purchase experience. If there is any problems, please contact us ASAP. If not, please leave us a positive response as it\'s very important for us. Thanks very much.
On Jun 26, 2026 at 20:01:07 PDT, seller added the following information:
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.