Specification:Operating Voltage: 12 or 24 volts ±20%Steady State Speed Band: ±0.25%Ambient Operating Temperature: -40℃ to +85℃Temperature Stability: Better than ±0.5% over temperatures of -40℃ to +125℃Mechanical Vibration: Withstands the following vibration without failure or degraded performance:0.06 inch double amplitude at 5 to 18 Hz; 1 G at 18 to 30 Hz Connections: Terminal stripEnclosure: Die cast aluminumWeight: 635 grams (1.4 lbs.) Magnetic Pickup Frequency Range: 2500 - 5000 HzOutput Signal: PWM current to 6A at max.Actuator Compatibility: EFC3408326, DYNA7000Model: 3062322Type: Speed ControllerFitment Type: Direct Replacement 3062322 Speed Controller For Generator KTA50 KTA38 KTA19 Engine
Specification:
Operating Voltage: 12 or 24 volts ±20%
Steady State Speed Band: ±0.25%
Ambient Operating Temperature: -40℃ to +85℃
Temperature Stability: Better than ±0.5% over temperatures of -40℃ to +125℃
Mechanical Vibration: Withstands the following vibration without failure or degraded performance:
0.06 inch double amplitude at 5 to 18 Hz; 1 G at 18 to 30 Hz Connections: Terminal strip
Enclosure: Die cast aluminum
Weight: 635 grams (1.4 lbs.) Magnetic Pickup Frequency Range: 2500 - 5000 Hz
Output Signal: PWM current to 6A at max.
Actuator Compatibility: EFC3408326, DYNA7000
Model: 3062322
Type: Speed Controller
Fitment Type: Direct Replacement
Speed range: 1kHz ~ 6.5kHz
Heat stability: Maximum ± 0.7%
IDLE adjustment: 260 ± 20Hz ~ 85% of the rated speed
DROOP adjustment: The minimum position is 15Hz ± 6Hz / per Ampert load current change
Maximum position 400Hz ± 75Hz / Mutations of load current per Ampert
External speed adjustment: ± 200Hz (1kΩ external)
AUX input sensitivity: 148Hz / 1V., ± 10Hz.,
Improved: 1MΩ
Environment:
Work temperature range: -40 ℃ ~ 85 ℃
Work humidity range: Maximum 95%
Save temperature: -55 ℃ ~ 92 ℃
Vibration: 20-100Hz 500mm/SEC.
Enter power supply:
Power voltage: 12V Or 24V DC battery system
Ground polarity: Negative electrode
Power consumption: 40mA
Continuous current of the actuator: minimum 1A; maximum 4.5A (3062322 maximum current can reach 8A)
Speed sensor signal: 2 ~ 120V RMS
Note: The above performance parameters are measured when the operating frequency is 3800Hz
Product Function Description:
Engine Governor Speed Controller 3062322 EFC3062322 Generator Speed Control Unit Compatible for Engine KTA50 KTA38 KTA19
EFC3062322 is a engine speed controller designed by all electronic device for actuator, It can respond to transient load changes fast and accurately. It has a wide speed control range. For this controller, separate circuits allow adjustments of proportional, integral and derivative values, these parameters work together to control and help engine respond to load changes fast and stably while maintain precise speed regulation of diesel.
This product has undergone rigorous quality testing.
Durable and easy to install and replace.
The most cost-effective and best after-sales service.
Quality assurance that gives you peace of mind.
Features:
It is a design of a full electronic closed loop control.
It uses a rapid response to the speed of the instant load to control the speed of the engine.
When the matching EFC electronic actuator and magnetic speed sensor signal are connected to the matching Then, then
In terms of design, it is easy to install and can be pre -adjusted, including the adjustment rate and work idle.
In order to assist the input of multiple machines or special use machines, and prevent the voltage of the inverse battery, the short -circuit failure of the actuator, the short -circuit failure of the actuator and the actuator and the actuator and the short -circuit failure and the actuator and the actuator.
Safety protection in the case of losing the speed sensor signal or power supply.
Package Includes:
1 PC Generator Speed Controller
Note:
We have warehouses in California and New Jersey.
We usually ship on a near by basis.
If one warehouse is out of stock, we will ship from another warehouse.
Thank you for your
Payment
We accept Paypal ,Google pay, Visa,Master Card, American Express, Discover. Mastercard etc.
Shipping
We process and dispatch your purchase within 3 business day after payment clearance.
Please contact us if you have special requirements (combination of packaging etc.).
We offer free USPS or FEDEX Package as default.
If you choose express post, we charge a flat rate and we Express Post, which can be delivered in 1-3 business days, depending on your location. If you require another company, please contact us.
Returns
Please contact us first when return, exchange and refund is required.
Any direct return of purchased items will not be processed.
Buyer is responsible for the return cost.
Change-of-mind return can only be accepted within 7 days after purchase.
All other returns can be accepted in 30 days.
We will closely examine the condition of the returned items and will not issue any refund/exchange before we make sure the items are in their original neat conditions.
Contact Us
Before leaving us neutral or negative response, please contact us first.
We will do everything we can to give you a satisfying solution.
Please don't open case via or PayPal.
Please don't open any return request before contact us.
We do our best to resolve any issue. Leaving negative response and low ratings doesn't get things solved.
So please talk with us and we will not let you down.
Hand ToolsControl Module
Shop CategoryStore Home CNC◈Edge finder◈Drill Bits◈Spring Collet◈Boring Bar◈Mandrel◈Collet Chuck◈Blade◈Pull Stud◈Quick Change Tool Post◈Drill Chuck◈Drill Chuck Arbors◈live center◈vise◈Milling Hand Tools◈Rivet Gun◈Wrenches◈Hydraulic Crimper◈Balance Level◈Drill Bits◈Outside Micrometer◈Casters◈Other Metalworking Supplies◈Sanding Disc◈Metal Cut Off Wheels◈Flap Discs◈Hose Clamp◈Welding Wire◈Cable◈Piston Driver◈Other Generator Accessories◈Automatic Voltage Regulator◈Generator Carburetor◈Other Industrial Control Module◈Control Valves◈Roller Chain◈Other Decorate◈Conduit Corrugated◈Interior door fittings◈Decoration materials◈Paint Sprayers OtherHot Item 6\" Mechanic Bench Vise Table Top Clamp Press Locking Swivel Base Heavy Duty USD 43.84 ER11/ER16/ER20/ER25/ER32/ER40 Spring Collet Set For CNC Milling Lathe Machine USD 38.85 5PC 3 inch Heavy Duty Office Chair Caster Rubber Swivel Wheels Replacement Set USD 20.09 AVR SX460 Automatic Voltage Volt Regulator Replacement For Stamford Generator USD 16.74 Hand Winch Heavy Duty Steel Cable Crank Gear Winch ATV Boat Trailer 600 lbs US USD 26.79 New List Item 740PCS Universal O Rings Assortment in 24Sizes with 4PC Tools Rubber O Rings Kit USD 13.43 550pack #4 #6 #8 #10 #12 Stainless Steel Wood Screws Kits Countersunk( 18 Size) USD 17.17 350Pack Threaded inserts kits M2-M6 Metric Internal Thread Rolled Copper Inserts USD 14.43 16mm Rebar Cut RC-16 5/8\" Rebar Cutter Capacity Portable Electric Hydraulic USD 135.99 1228 Pcs 32 Size Transparent Silicone O-Ring Seals With Clips And Hooks, 4-32mm USD 25.74 3062322 Speed Controller For Generator KTA50 KTA38 KTA19 Engine
Specification:
Operating Voltage: 12 or 24 volts ±20%
Steady State Speed Band: ±0.25%
Ambient Operating Temperature: -40℃ to +85℃
Temperature Stability: Better than ±0.5% over temperatures of -40℃ to +125℃
Mechanical Vibration: Withstands the following vibration without failure or degraded performance:
0.06 inch double amplitude at 5 to 18 Hz; 1 G at 18 to 30 Hz Connections: Terminal strip
Enclosure: Die cast aluminum
Weight: 635 grams (1.4 lbs.) Magnetic Pickup Frequency Range: 2500 - 5000 Hz
Output Signal: PWM current to 6A at max.
Actuator Compatibility: EFC3408326, DYNA7000
Model: 3062322
Type: Speed Controller
Fitment Type: Direct Replacement
Speed range: 1kHz ~ 6.5kHz
Heat stability: Maximum ± 0.7%
IDLE adjustment: 260 ± 20Hz ~ 85% of the rated speed
DROOP adjustment: The minimum position is 15Hz ± 6Hz / per Ampert load current change
Maximum position 400Hz ± 75Hz / Mutations of load current per Ampert
External speed adjustment: ± 200Hz (1kΩ external)
AUX input sensitivity: 148Hz / 1V., ± 10Hz.,
Improved: 1MΩ
Environment:
Work temperature range: -40 ℃ ~ 85 ℃
Work humidity range: Maximum 95%
Save temperature: -55 ℃ ~ 92 ℃
Vibration: 20-100Hz 500mm/SEC.
Enter power supply:
Power voltage: 12V Or 24V DC battery system
Ground polarity: Negative electrode
Power consumption: 40mA
Continuous current of the actuator: minimum 1A; maximum 4.5A (3062322 maximum current can reach 8A)
Speed sensor signal: 2 ~ 120V RMS
Note: The above performance parameters are measured when the operating frequency is 3800Hz
Product Function Description:
Engine Governor Speed Controller 3062322 EFC3062322 Generator Speed Control Unit Compatible for Engine KTA50 KTA38 KTA19
EFC3062322 is a engine speed controller designed by all electronic device for actuator, It can respond to transient load changes fast and accurately. It has a wide speed control range. For this controller, separate circuits allow adjustments of proportional, integral and derivative values, these parameters work together to control and help engine respond to load changes fast and stably while maintain precise speed regulation of diesel.
This product has undergone rigorous quality testing.
Durable and easy to install and replace.
The most cost-effective and best after-sales service.
Quality assurance that gives you peace of mind.
Features:
It is a design of a full electronic closed loop control.
It uses a rapid response to the speed of the instant load to control the speed of the engine.
When the matching EFC electronic actuator and magnetic speed sensor signal are connected to the matching Then, then
In terms of design, it is easy to install and can be pre -adjusted, including the adjustment rate and work idle.
In order to assist the input of multiple machines or special use machines, and prevent the voltage of the inverse battery, the short -circuit failure of the actuator, the short -circuit failure of the actuator and the actuator and the actuator and the short -circuit failure and the actuator and the actuator.
Safety protection in the case of losing the speed sensor signal or power supply.
Package Includes:
1 PC Generator Speed Controller
Note:
We have warehouses in California and New Jersey.
We usually ship on a near by basis.
If one warehouse is out of stock, we will ship from another warehouse.
Thank you for your
PaymentShippingReturnsContact Us
We accept Paypal ,Google pay, Visa,Master Card, American Express, Discover. Mastercard etc.
We process and dispatch your purchase within 3 business day after payment clearance.
Please contact us if you have special requirements (combination of packaging etc.).
We offer free USPS or FEDEX Package as default.
If you choose express post, we charge a flat rate and we Express Post, which can be delivered in 1-3 business days, depending on your location. If you require another company, please contact us.
Please contact us first when return, exchange and refund is required.
Any direct return of purchased items will not be processed.
Buyer is responsible for the return cost.
Change-of-mind return can only be accepted within 7 days after purchase.
All other returns can be accepted in 30 days.
We will closely examine the condition of the returned items and will not issue any refund/exchange before we make sure the items are in their original neat conditions.
Before leaving us neutral or negative response, please contact us first.
We will do everything we can to give you a satisfying solution.
Please don't open case via or PayPal.
Please don't open any return request before contact us.
We do our best to resolve any issue. Leaving negative response and low ratings doesn't get things solved.
So please talk with us and we will not let you down.
All rights reserved.
On Nov 17, 2026 at 02:07:13 PST, seller added the following information:
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.