SET OF GASKETS 3\" for PERFORATED FLASK
FOR VACUUM CASTING
SILICONE & GRAPHITE -GASKETS FOR3\"PERFORATED FLASKS-VACUUM SEALFOR FLASK & ADAPTER RING-
A set of 3\" gaskets... High Grade Silicone and Graphite High Temperature gaskets.These gaskets are die cut gaskets andmade in USA.
Gaskets are used together to provide the best seal during vacuum casting to seal perforated flask ring and casting chamber.
The Silicon acts as a sealing layer while the graphite placed on top of the silicone, protecting and prolonging the silicone seal from the high flask temperature.
The combination of the 2 types of gaskets provide a very good seal, allowing the vacuum to fully pull the molten metal into the flask.
These gaskets are die cut, have a thickness of 1/8\" for the Silicone and 1/16\" for the Graphite.Gaskets come in various diameters to work with individual flask OD sizes, visit our store.
-Materials:Silicon & Graphite
-Flask Diameter: 3\" - 76.3mm
-Outside Diameter:4-1/2\" - 114.3mm
-Inside Diameter:3-3/8\" - 85.7mm
-Gasket Width:9/16\" - 14.3mm
-Thickness:Silicone -1/8\" / Graphite 1/16\"
Item is new, Packaged - sandwiched in between cardboard to ensure safe shipping.VERY FragileSHOULD NOT BE BENT
Note:The Graphite gasket will last long and can be used as long as they are handled properly… avoiding cracking or breakage, they are subject to breakage.
E2 1020 CKSP
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.