3 Channel DMX512 Decoder RGB PWM Dimmer DMX LED Strip

$6.99

General Product Information
- Basic / Dumb control over elements that use RGB lights that do not need individual control.
- DMX addressing:
  - Addressable from DMX address 1 to 510 using build in DIP switches
  - Controller can be configured via DIP switch to have a variety of test modes - the following is the map for optional sequences:
    - Turn ON switch 10 to activate built-in sequences
      - Turning ON switch 10 will prevent the controller from responding to DMX input signals
    - Switches 1-9 OFF: Black / No Output
    - Switch 1 ON: Red
    - Switch 2 ON: Green
    - Switch 3 ON: Blue
    - Switch 4 ON: Yellow
    - Switch 5 ON: Purple
    - Switch 6 ON: White
    - Switch 7 ON: Not Used
    - Switch 8 ON: Seven different colors
    - Switch 9 ON: When this switch is turned on, along with switch 8 being on, then switches 1 to 7 will adjust the speed of the changes between the seven different colors
    - Switch 10 ON: Invoke test mode (requires other switches to be turned on or off)
  - The small size of this controller allows mounting directly to elements. If needed, the controller can be removed from the included case/box to further reduce the size of the controller (controller must located in a waterproof location.)
  - Easy to mount with either screws (two on each side) or with hot glue to the base.
  - We have found these controllers to be nearly bullet proof with features like:
    - Short circuit protection on the inputs and outputs
    - Over current protection
    - Great for use in distributed controller style=\"box-sizing: border-box;\">Included, optional and customer supplied items
      - Items included with this item/product/bundle:
        One DMX Controller
        Water resistant housing/case (IP64).
      - Required items for operation:
        RGB lights (basic/dumb/PWM) – will not work with individually controlled pixel lights.
        Power supply
        RS485 based DMX512 signal source
        DMX generating software
        Shrink wrap tubing (for sealing soldered connections). We do not recommend wire nuts or electrical tape be used for connections.
      - Optional items
        Mounting (screws, two sided tape, hot glue or other) - Customer supplied
    - Technical Specifications
      - Color: White
      - Dimensions & Weight
        Complete product (overall)
        Per: .10 pounds / 1.5 Oz
        Height: 1.0\"
        Width (main case, excluding mounting tabs): 2.125\" or 2 1/8\"
        Width (main case including tabs): 2.86\" or 2 7/8\"
        Depth: 1.5\"
        CAD Drawings upon request
      - Temperature Range
        Operation: 0 to 110 degrees Fahrenheit
        Storage: -20 to 140 degrees Fahrenheit
        Material Composition
        Case: Hard UV resistant plastic
        Wires: PVC coated - tin plated style=\"box-sizing: border-box;\">County of Origin
        Materials/parts: China / USA / Japan
        Assembly: China
        Design: China / USA
        Certifications & Approvals
        Underwriters Laboratories (UL) Certified/Recognized/Approved: No
        CE: No
        ROHS (Lead Free): Not Listed
        Compatibility
        All DMX512 output devices including:
        HolidayCoro Actidongle
        Enttec Open
        Enttec Pro
        LOR USB “Dongle” (varies)
        DIYLA Lync Dongle
        DMX King
        LOR iDMX-1000
        SanDevices ELOR
        Any standard DMX output device
        Power / Signal / Wiring
        Wiring / Interface:
        DMX input
        Protocol: DMX512/1990
        Signal: RS-485
        Stripped and tinned wires ~7\" Long
        Green: RS-485 Negative
        Red: RS-485 Positive
        Black: Ground (optional)
        Power input
        Stripped and tinned wires ~8\" Long
        Voltage Range: 6 to 24v DC
        Red: Positive 6-24v
        Black: Negative 6-24v
        Signal (PWM) output
        Stripped and tinned wires ~8\" Long
        Dimming Levels / Steps: 8 Bit / 256 (DMX Maximum)
        Up to 2 amps per channel (6 amps per controller)
        Length (stripped and tinned wires):
        Black: Common positive 12v (shared)
        Red: Red / Channel 1 common negative
        Green: Green / Channel 2 common negative
        Blue: Blue / Channel 3 common

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

3 Channel DMX512 Decoder RGB PWM Dimmer DMX LED Strip

More items on eBay