2x200W MA5332 Digital Power Amplifier Integrated Multi-chip Module with Radiator
$91.87

Power amplifier board size: 100mm×62mm×30mmWeight: 200gPower supply voltage: ±22V ~ ±40V DC, ±36.5V Type, 8AOutput power: 2×200W (10% THD+N, 4Ω at ±36.5V)THD+N: 0.01% at (1KHz, 70W, 4Ω, typical)Conversion efficiency: 95%It adopts a 4-layer board design with a heat sink and has excellent heat dissipation performance. It is equipped with complete over-current protection, over-voltage protection, under-voltage protection, over-temperature protection, etc.As a highly integrated multi-chip module, MA5332 also provides over-current, over-temperature, and under-voltage protection circuits with self-resetting function for MA5332MS. This system-on-chip based protection circuit does not require the use of external components for the design of the protection circuit, which can save time. In addition, the new internal logic control method that controls the soft-start operation further reduces the click noise. Benefiting from functional improvements, MA5332MS can reduce BOM (bill of materials) costs and heat dissipation requirements, bring more space for industrial design, and achieve excellent efficiency and low output distortion.MA5332MS adopts a 42-pin QFN package with a size of 7mm × 7mm. It integrates a dual-channel PWM controller, a high-voltage gate driver, and 4 low on-resistance (RDS(ON)) MOSFETs in a small package. Due to the extremely low on-resistance (typical value: 24.4 mΩ) of the output stage of the Class D audio amplifier, MA5332MS can provide a constant power of 2 × 100 W for a 4 Ω load without a heat sink; when using a small 8 °C/W heat sink, it can provide a constant power of 2 × 200 W for a 4 Ω load. Compared with other single-chip solutions, the size is greatly reduced. MA5332MS can provide differential or single-ended input and multiple output configuration options - single-ended (2x SE), bridge-tied load (BTL), and parallel single-ended (PSE), and supports dual power supply or single power supply. Replacing the BTL structure with the SE structure can reduce bus capacitors and output low-pass filters.
Packing contents: 1 piece

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.