2pcs 1 Channel DC 12V Latching Relay Module with Touch Bistable Switch One Ch...

Description:

Power supply to meet the scope , DC 12V;

The power required by the by -line diagram , is not reversed , although the protection circuit , but not for a long time reversed ;

Product regulator slight fever is a normal phenomenon , long working hours have a normal relay heat phenomena are normal ;

Relay load power to give leave some margin should avoid high-power ( about 2000W) and long working environment , there will be some impact on the life of the product .

Features :

Double panel design PCB;

Chips made using stable and reliable control , stable and reliable performance , strong anti-interference , not false triggering , performance is superior than the CD4013 ;

Regulator has the power to provide adequate and stable voltage , and have enough vents to ensure stable and reliable product for a long time to work ;

With anti- reverse protection diode power , reverse power for a short time without any damage to the product ;

Use SONGLE genuine relay control load in 250V 10A ( AC ) and 30V 10A ( DC ) under load can withstand ;

Has a touch switch as product testing , stability testing of products directly ;

Can also trigger an external trigger switch , the products have a connection with a good seat and lead , more convenient to use ;

Triggering sensor module can also be used to do other triggers , are valid as long as the trigger is low , there are more functional expansion;

Parameters :

Supply Voltage :12V (DC) supply current : more than 100mA

Load : 250V 10A (AC) or 30V 10A (DC)

Life: 1 million times

Usage:

Press the trigger button , the relay is locked , press again , the relay off , you can also add the trigger switch , and the use of low-level trigger .

Packing Included:

2x 1 Channel Self-locking Relay Module 12V

2x Trigger Line

2pcs 1 Channel DC 12V Latching Relay Module with Touch Bistable Switch One Channel Relay Switch
Supply Voltage :12V (DC) supply current : more than
Load : 250V 10A (AC) or 30V 10A (DC)
Press the trigger button , the relay is locked , press again , the relay off , you can also add the trigger switch , and the use of low-level trigger .