2Pcs DC 24V 1 Channel Relay Module with OPTO Isolation Support High or Low Level

• Store
• New Arrivals
• Add to Favorite
• View response
• Contact

2Pcs DC 24V 1 Channel Relay Module with OPTO Isolation Support High or Low Level Trigger Item model number 3-01-0375 Maximum Switching Voltage 24 Volts Current Rating 10 Amps Coil Voltage 24 Volts Material Type lead Specification Met Ma Contact Current Rating 10 Amps Manufacturer Part Number 3-01-0375 Is Discontinued By Manufacturer No Package Dimensions 4.45 x 3.46 x 1.02 inches Connector Type Screw Item Weight 1.23 ounces Maximum Switching Current 10 Amps Mounting Type DIN Rail Mount Color Red Wattage 2.4E+2 Operation Mode Manual Contact Type Normally Open, Normally Closed Contact Material Silver Size Small

• The module uses genuine quality relay, normally open interfaces , Maximum load: AC 250V/10A, DC 30V/10A.
• Using SMD optocoupler isolation, strong driving capability, stable performance; trigger current 5mA.
• Fault-tolerant design, even if the control line is broken, the relay will not move.
• The interface design of human nature, all interfaces are available through a direct connection terminal leads, very convenient.
• The Module can be set by jumper high or low trigger.

24V 1 Channel Relay Module With OPTO Isolation Support High or Low Level Trigger
Description
1. Maximum load: AC 250V/10A, DC 30V/10A
2. Using SMD OPTOCOUPLER isolation, the trigger current only 5mA
3. The module have 5V, 9V, 12V and 24V are available
4. The module can be set to high or low triggered by jumper
5. Fault-tolerant design, even if the control line is broken, the relay will maintain;
6. Has the power indicator (green) and relay status indicator (red)
7. Size: 50*26*18.5mm
8. Has four mounting bolts holes, hole 3.1mm, 44.5*20.5mm pitch
Interface:
Input:
VCC: Relay power supply +
GND: Relay power supply -
IN: Signal trigger input (High or Low Level Signal, select via jumper)
Output:
NO: Relay normally open.
COM: Relay Common Pin
NC: Relay normally closed.
High or Low Level Trigger Select:
1. Use High Level Trigger
When ¡°IN¡± input High Level Signal, the ¡°NO¡± connect with ¡±COM¡±
When ¡°IN¡± input Low Level Signal, the ¡°NC¡± connect with ¡°COM¡±
2. Use Low Level Trigger
Package Included：
2* 24V 1 Channel Relay Module