Description:
· Working Voltage Range】: DC 8.5V to 50V input voltage, 10V to 60V continuously adjustable output voltage, 15A maximum input current, 12A maximum output current.· The boost module has 2 heat sink that could enhance heat dissipation. When there is a big difference between input and output voltage, please decrease power and current.· 【High Conversion】: The maximum conversion efficiency can be 96%.The DC 400W 15A Power Module designed with two heat sinks, better dissipation performance.· 【Easy to Connect and Disconnect】: Input and output are designed with screw terminals, you can connect or disconnect the wire conveniently.· Widely used for electric equipment, digital products, laptop and more. It can also be used as a driver for high power LED lights or voltage regulator for solar panels.
Specifition:
Type: Non-isolated boost moduleInput Voltage: DC 8.5V to 50VOutput Voltage: DC 10V to 60V (continuously adjustable, default 19V)Max. Input Current: 15A (please enhance heat dissipation if more than 8A)Max. Output Current: 12A (related to the input and output voltage difference, the greater voltage difference is, the smaller output current will be. please enhance heat dissipation when current is over 7A)Quiescent Current: 10mA (will increase when convert 12V to 20V)Constant Current Range: 0.2A to 12AOutput Power = Input Voltage*Current Operating Temperature: -40° to 85° (if temperature is too high, please enhance heat dissipation)Frequency: 150KHz Max. Conversion Efficiency: 96% (Efficiency is related to input/output voltage, current and voltage difference)Over Current Protection: Yes (if input current is more than 15A, it will automatically reduce output voltage)Reverse Input Protection: NoSize: 67 x 48 x 28mm (2.64 x 1.89 x 1.10 inches)
Note:
Please allow 1-3mm error due to manual measurement. pls make sure you do not mind before you offerDue to the difference between different monitors, the picture may not reflect the actual color of the item
Package include:
2*Non-isolated boost module(At your Option)
Output voltage/current regulation method:1.Adjust the \"CV-ADJ\" potentiometer and set the output voltage to the value you need based on your battery or LED. For example, the voltage of 10 strings of leds is adjusted to 37V. (Increase the counterclockwise voltage and decrease the clockwise voltage)2. Turn the \"CC-ADJ\" potentiometer counterclockwise by about 30 turns, set the output current to low, connect the LED, and adjust the RV2 potentiometer to the current you need. For battery charging, after the battery is completely discharged, connect it to the output and adjust RV2 to the current you need. (When charging, it is essential to use a fully discharged battery for adjustment, as the more remaining power in the battery, the smaller the charging current.)\" (Reduce the counterclockwise current and increase the clockwise current)Please do not adjust the current by short circuit. The circuit structure of the boost module cannot be adjusted by short circuit.
On Jan 5, 2026 at 17:33:06 PST, seller added the following information:
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.