12v thermostat XH-W3001
Material: ABS Plastic and Stainless Steel
Voltage: 12V
Current: 10A
Power Rating: 120W
Temperature Range: -50°C to 110°C
Control Accuracy: ±0.1°C
Probe Type: NTC10K Waterproof Stainless Steel
Probe Length: 1 Meter
Display Type: LED
How to use:
How to set the Startup Temperature:
Press the Up Button once and display the start temperature.
Press and hold the Up Button for about 3 seconds, then Startup temperature flashed
How to set the Stop Temperature:
Press the Down button once and display the stop temperature.
Press and hold the Down Button for about 3 seconds, then stop temperature flashed
How to restore the factory settings:
Under the condition of power on, press and hold the Up and Down Button
at the same time, the display will show 888 and then automatically
perceive current temperature, the factory settings have been restored.
Package: 2PCS Digital LED Temperature Controller Module
- ✹✹UMLIFE the XH-W3001 digital thermostat switch is made of ABS, one of the five major synthetic resins, which is non-toxic, strong impact resistance, heat and low temperature resistance
- ✹✹Waterproof probe: With1m NTC10K probe made of stainless steel, waterproof and not easy to rust, easy to use.
- ✹✹Heating ( start temperature is less than stop temperature), Cooling ( start temperature is above than stop temperature).Range from -50°C to 110°C.The high temperature control accuracy reaches 0.1℃
- ✹✹Widely used in the hatching area, incubation, equipment case, air conditioning system, temperature control protection, cabinet cooling system and other fields.
- ✹✹Package: 2PCS Digital LED Temperature Controller Module, XH-W3001 Digital Thermostat Switch with Waterproof Probe Programmable Heating Cooling Thermostat 12V 10A 120W Range from -50℃ to 110℃
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.