2PCS USBASP Downloader Programmer and 10Pin to 6Pin Adapter Board with Cable

Description:
The USBASP downloader programmer can be directly connected to the USB interface of the computer, which is very convenient to use.
Features:
1. Onboard ATMega8 chip.
2. With two indicator lights: power supply and Programming
3. Onboard 500mA overcurrent protection self-recovery fuse
4. Support 5V and 3.3V power supply, the output voltage can be adjusted easily by the jumper cap.
5. Programming interface is reserved, the user can upgrade the downloader firmware by themself.
6. Support AT89S51 / 52 microcontroller
7. Support many AVR ASP chips
8. The output port is ATMEL standard port
9. AUTOSPEED automatic speed control firmware
10. Can be used to update Ender 3 or Ender 3 Pro firmware
11. Reserved MOSI, MISO, RET, SCK, VCC, GND. 6PIN interface, user-friendly connection to the target board.
12. Applicable to WIN8.1/8/7/XP 32-bit/64-bit, system computer. Note: This product is not suitable for WIN10.
Compatible Chip Types:
51 Series:
AT89S51, AT89S52, AT89S53, AT89S8252
AVR Series:
ATTiny12 (L), ATTiny13 (V), ATTiny15 (L), ATTiny24 (V), ATTiny25 (V), ATTiny26 (L),
ATTiny2313 (V), ATTiny44 (V), ATTiny45 (V), ATTiny84 (V), ATTiny85 (V), AT90S2313 (L),
AT90S2323 (L), AT90S2343 (L), AT90S1200 (L), AT90S8515 (L), AT90S8535 (L), ATMEGA48 (V),
ATMEGA8 (L), ATMEGA88 (V), ATMEGA8515 (L), ATMEGA8535 (L), ATMEGA16 (L), ATMEGA162 (V),
ATMEGA163 (L), ATMEGA164 (V), ATMEGA165 (V), ATMEGA168 (V), ATMEGA169 (V), ATMEGA169P (V),
ATMEGA32 (L), ATMEGA324 (V), ATMEGA325 (V), ATMEGA3250 (V), ATMEGA329 (V), ATMEGA3290 (V),
ATMEGA64 (L), ATMEGA640 (V), ATMEGA644 (V), ATMEGA645 (V), ATMEGA6450 (V), ATMEGA649 (V),
ATMEGA6490 (V), ATMEGA128 (L), ATMEGA1280 (V), ATMEGA1281 (V), ATMEGA2560 (V), ATMEGA2561 (V),
AT90CAN32, AT90CAN64, AT90CAN128, AT90PWM2 (B) , AT90PWM3 (B)

• The USBASP downloader programmer can be directly connected to the USB interface of the computer, which is very convenient to use. The output port is ATMEL standard port
• Support 5V and 3.3V power supply, the output voltage can be adjusted easily by the jumper cap
• Support AT89S51 / 52 microcontroller, Support many AVR ASP chips. It can be used to update Ender 3 or Ender 3 Pro firmware
• Applicable to WIN8.1/8/7/XP 32-bit/64-bit, system computer. Note: This product is not suitable for WIN10.
• The AVRISP USBASP STK500 adapter board with standard interface 10 Pin to 6 Pin. Reserved MOSI, MISO, RET, SCK, VCC, GND. 6PIN interface, user-friendly connection to the target board.