2PCS PWM to Voltage Conversion Module 0%–100% PWM to 0V–10V Conversion Module

2PCS PWM to Voltage Conversion Module 0%–100% PWM to 0V–10V Conversion Module

• 2PCS PWM to Voltage Conversion Module 0%-100% To 0V-10V For PLC MCU Digital to Analog Signal PWM Adjustable Converter Power Module
• PWM to Voltage Conversion Module 0%-100% To 0V-10V

Operation instructions

After power-on, when there is no input signal, the output is 0V, and only when there is input can the output be obtained. When the first power is on, it is better to do a calibration debugging: find a 50% duty cycle signal to connect to PWM, GND, the corresponding amplitude of the jump needle. Frequency is 1KHZ-3KHZ. Measure VOUT and GND ports with multimeter. The meter is displayed at about 5V. The potentiometer on the adjusting board is displayed at 5.00V. This calibrates the corresponding relationship between your pulse signal and this module. When the frequency changes, the corresponding relationship may be offset and need to be recalibrated. The output voltage can be adjusted by adjusting duty cycle. Accuracy can be controlled by adjusting potentiometers

Product DetailsInterfaceParallelUnit Count2 CountPart NumberpwmTVOL-10v-002Material TypePlasticInterface TypeParallelNumber of Pins3Number of Items2Compatible DevicesPLC, MCU, Electronic DevicesNumber of Channels2Included Components2 PCSMaximum Supply Voltage30 volts_of_direct_currentMinimum Supply Voltage12 volts_of_direct_current