24Mhz Dual-channel DDS Function Arbitrary Waveform Signal Generator Sine/Square
Model: FDY3024S
Manual and software download:
Description
Excellent technical indexes and function features:
◆Each function can be adjusted by host computer.
◆Preinstalled 14 common waveforms.
◆High waveform accuracy: The output waveform synthesized by function calculation is of high accuracy and low distortion.
◆Sweep Function:Linear sweep and Logarithmic sweep. Starting and stop points can be set optionally.
◆Operation mode: Button and knob controlled with LCD1602 display, digital set directly or knob adjusted continuously.
◆Highly reliable:Large scale integrated circuit, Surface mounting technology, reliable and durable.
◆Frequency measurement:Frequency of internal / external signal can be measured through built-in 100MHz frequency meter.
◆Follow function: Built-in parameter follow function covering frequency, amplitude, offset, duty cycle, waveform etc. for user’s convenience.
Product Function and Technology Indexes
Model
FY3206S
FY3212S
FY3220S
FY3224S
Sine wave frequency range
0Hz~6MHz
0Hz~12MHz
0Hz~20MHz
0Hz~24MHz
Square wave frequency range
0Hz~6MHz
0Hz~6MHz
0Hz~6MHz
0Hz~6MHz
Triangle wave frequency range
0Hz~6MHz
0Hz~6MHz
0Hz~6MHz
0Hz~6MHz
Arbitrary wave frequency wave
0Hz~6MHz
0Hz~6MHz
0Hz~6MHz
0Hz~6MHz
Parameters of signal output
Output channel
CH1 and CH2 dual channel high speed output separately.
Output waveform
Sine wave, square wave (duty cycle adjustable), triangle wave, sawtooth wave, arbitrary wave, common pulse, noise, electrocardiogram, AM, FM etc.
Output amplitude
≥20Vp-p(No load)
Output impedance
50Ω±10%
DC offset
±10V
Resolution
0.01Hz(10mHz)
Frequency accuracy
±5×10-6
Frequency Stability
±2×10-6/3小时
Sine wave distortion
≤0.8% (reference frequency 1kHz)
Triangle linearity
≥98% (0.01Hz~10kHz)
Rise and fall time of square wave
≤100ns
Square wave duty cycle range
0.1%~99.9%
TTL output
Dual-channel TTL electric level synchronize with CH1 and CH2.Phase differences are adjustable.
Electric level range
>3.3Vp-p
Fan-out
>20 TTL (Load)
Level rise fall time
≤20ns
Frequency Counter function
Counter range
0-4294967295
Frequency meter range
1Hz~100MHz
InputVoltage Range
2Vp-p~20Vp-p
Sweep function
Only CH1 has this function.
Sweep mode
Linear sweep, Logarithmic sweep
Frequency setting range
Starting and stop points can be set optionally.
Sweep range
fM1 (pre-set) ~ fM2 (pre-set)
Sweep speed
1s~99s /step-by-step
Other features
Display mode
LCD1602 in English
Save and load
M0-M19(Default: M0)
Buzzer warning tone
Can be turned On/Off by setting
Wide working voltage range
AC85V~AC260V
Production technology
Surface mounting technology, large scale integrated circuit, reliable and durable
Operating
Buttons controlled & knob adjusted continuously.
Work condition
Temp.:0~40℃ Humidity:﹤80%
Dimension
200mm(Long)×190mm(Wide) ×90mm(High)
Weight
500g(bare machine),Accessory(150g)
Button introduction
1. 【PARM】 button can be used to toggle the interfaces among Waveform, Amplitude, Offset, Duty cycle and Phase.
2. 【WAVE】 button can be used to enter waveform selecting interface and toggle the type of current output waveform.
3. 【COUNT】button is shortcut key for measurement and can be used to switch between frequency measurement interface and counter interface.
4. 【SWEEP】button is shortcut key for sweep function and can be used to enter sweep and sweep time interfaces.
5. 【SYS】button can be used to enter the interfaces of follow setting, save or load.
6. 【CH1】Main waveform confirmation, Output/Stop.
7. 【CH2】Subsidiary waveform confirmation, Output/Stop.
8. 【3】Cursor move to left.
9. 【4】Cursor move to right.
10.【OK】ADJconfirmation(move downward)
Package include:
1 x 20MHz Dual-channel Arbitrary Waveform DDS Function Signal Generator
2 x BNC test clip
1 x Power cable
1 x USB Cable
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.