Microwave Sensor Blind Area Detect Radar Detection System Lane Change Drive Assistance
Product Description:
Blind Spot Detection is a driver assistance system for safe lane changes and collision avoidance; Built with two 24GHz radar sensors,
It monitors the vehicle’s left and right rear blind spots within 3.5m×15m, detecting moving objects with a speed difference over 0.5m/s; LED indicators and a buzzer give instant warning alerts once hazards are spotted
When the moving object enters the blind area, the LED light will be on to alert the driver. At the same time, when the steering is turned on, the system works in lane change assistant mode. The LED light will flash rapidly and beep to alert the driver being careful to change a lane.
Applicable Vehicle Models:
-Compatibility: DC12V vehicles (sedans, SUVs, MPVs, commercial).
-Fits length ≤4.7m. Contact seller for extension cable if needed.
-Bumper type: Plastic only. Not for metal bumpers.English manual and wiring diagram included.
Specifications:
-Radar: 24GHz millimeter-wave radar
-Number of radars: 2
-Voltage: 12V
-Operating current:≤150mA@ 12VDC
-Operating temperature: -25℃~+60℃
-Waterproof rating: IP67K
*Function 1: (BSD)Blind Spot Detection
*Function 2: (LCA)Lane Change Assist
*Function 3: (DOW)Door Opening Warning
-Operating speed: 0km/h
-Detection range accuracy: 0.25M typical value
-Detection range: 3.5 * 15m
-Alarm method: Light + sound warning
-Level 1: LED constantly on
-Level 2: LED flashes + Beep (Turn signal on)
【Working Principle】
Automatically starts when the engine starts and automatically shuts off when the engine stops; It does not react to stationary objects,only warning moving objects such as cars, pedestrians, bicycles, and motorcycles.
【Operating Mode】
The system activates when the engine starts and stops when the engine stops.
When a moving object enters the detection range at a speed greater than the host vehicle, the LED illuminates for 3 seconds as an alert.
Activating the turn signal triggers lane change assist mode: LED flashes rapidly and buzzer beeps 3 times to remind the driver to change lanes cautiously.
【3 Major Functions】
This universal blind spot system integrates BSD- Blind Spot Detection, LCA-Lane Change Assistance, DOW -Open Door Warning 3 functions to help detect the possible collision risk.
Product includes 2 different LED sets (general + mirror-specific), lets you freely choose the display mode.
Function Protection 1:BSD Blind Spot Detection – Real-time monitoring of the left and right rear blind spots; LEDs will illuminate continuously for 3s to warn of approaching vehicles.
Function Protection 2:LCA Lane Change Assist– When a vehicle approaches and the turn signal is activated, visual and auditory warnings are triggered to prevent reckless lane changes and collisions.
Function Protection 3:DOW Door Opening Warning – This alarm sounds when a moving object approaches the vehicle, preventing accidents caused by sudden door opening.
Do not use the blind spot information system as a replacement for using the interior and exterior mirrors or looking over your shoulder before changing lanes. The blind spot information system is not a replacement for careful driving.⚠️WARNING:
The system may not operate properly during severe weather conditions, for example snow, ice, heavy rain and spray. Always drive with due care and attention. Failure to take care may result in a crash.