FEATHERLITE CARD RISERSSet of 24, Ultralight Low Profile Design
Turn a flat case into a stadium, with a fraction of the plastic. Twenty four ultralight tiered risers fill a Zion display case in an 8 by 3 layout, lifting every slab to its own height so the back rows are just as visible as the front.
Thin on purpose
Read this part before you buy. Each riser weighs 0.56 ounces, just under half the weight of my faceted riser. These are extremely thin and extremely light, and the first one out of the bag is going to feel like almost nothing in your hand. That is not a defect and it is not a shortcut. That is the design.
A graded slab is heavy and its weight loads straight down into the channel. The riser does not need to be thick to hold that. Thin holds it. Thin just does not feel like it will until the slab is sitting on it.
If you have bought solid risers before, these are not those. Same lift, same channel, same fit, half the material.
What thin actually buys you
Less plastic behind every slab, so the card is what you see instead of the stand. A full set of 24 weighs 13.4 ounces, so a loaded case stays something you can move without planning around it. And a lower cost per riser, which is what makes tiering a large collection add up in the first place.
Filling one case with solid risers is easy. Filling five is a different conversation. This is the riser for the second one.
Which riser is right for you
Featherlite if you are filling multiple cases, your display lives on a shelf, and you care how the case looks rather than how the riser feels in your hand.
Faceted or Honeycomb if you vendor shows and pack, unpack, and haul the same case every weekend, or you want more weight and presence when you handle the piece itself. Both are in my store.
Slabs and toploaders, same riser
The channel is sized to seat a graded slab or a toploader, so you can mix a PSA card and a raw toploader in the same row without swapping hardware or leaving a gap. The riser does not care which one you put in it.
What you get
24 Featherlite card risers. Enough to fill one Zion display case. Thin and lightweight by design.
No display case included. No PSA slab included. No trading card included. The risers only, nothing else.
SpecsQuantity24 risersEach riser6-⅞ x 3-⅗Weight0.56 oz per riserSet weight13.4 oz for all 24ProfileUltralight, low profileLift angle15.36 degreesMaterialPLA, rigid and matteColorBlackFitsPSA, BGS, SGC, CGC slabs and standard toploadersBuilt for the shelf
A flat case buries your best cards behind your worst. Tiering puts every slab at eye level and makes the whole shelf look like you meant it. Featherlite does that job with the least plastic possible, so what people notice is the collection and not the hardware holding it up.
Custom colors available. Message me before ordering and I will work with you.
Made to order. Ships carefully packaged.
Slab it, rise it.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.