Free Userbar - Userbars - User Bar - User Bars
 
Advanced search
Registered users

Username:

Password:

Log me on automatically next visit?

¬ Forgot password
¬ Registration

» Upload Userbar
» Animate Userbar
» Userbars Tutorial
» Userbar Tournaments
» Forum
» Chat Room
» FAQ
» Links

• PC Cheat Codes

>> If you dont know how to design a userbar, then write here a Userbar that you want. >> If you know how to design them help these people and design what they request.




USERBARS.org | Free Forum Userbars

On eBay now
eBay

220V Laboratory Flotation Machine Mineral Testing Processing ore separator 1.5L

220V Laboratory Flotation Machine Mineral Testing Processing ore separator 1.5L
$1,600.00

Buy Now

Mineral Processing Equipment Laboratory Flotation Machine 220V 90W

Flotation machine is applicable for separating non-ferrous metal, black metal, noble metal, non-metal mineral and raw materials of chemical industry. It can be used in geology, metallurgy, building materials, chemical and other industrial laboratories to float a small quantity of ore samples and also in education and many mine sites. It is one of the best choices for you to do the test about the mine recovery and synthesis on your begining stage before mass mining.

Technical Parameters :
Voltage:220V 1PH
Power: 90 W50/60hz
Model Volume :1.5L
Impeller Diameter:60mm
Impeller speed: 1910 rpm
Scraper speed: 15-30rpm
Feed size:≤0.25
Temperature adjustment range:50-95 degree centigrade.
Product size:17*12.2*28 inch


High efficiency work, the working motor is much quieter than other electric opportunities, to provide you with a more comfortable working environment. 1.5L cell body 7\" Tray,Position can be adjusted freely. Glass rotameter for gas/air flow meter with control valve.
20 Degree Celsius/101325Pa
Allow the gas to be measured ≤ 1MPa with a scraper Use:
1,Turn on the power supply;
2,Test starting: check the rotation direction of the spindle, it must be rotated clockwise, if not, the phase sequence of the power supply should be changed to make the motor rotate clockwise before it can start working;
3,The mineral sample and water are mixed into the tank, the motor is started, the main shaft rotates, the impeller in the tank begins to stir, and then the valve is opened to inflate, and the foam can be formed after the required agent is added;
4, make the scraper rotate, then the foam can be scraped out of the notch, the material box is placed on the workbench, and the required mineral species can be obtained after the scraped foam is treated.
5.Turn off the power after use.

Maintenance:
1, Each time before starting work, check whether there is a foreign body blockage in the instrument groove, the Impeller and the belt are matched, and the screw linkage is normal.
2, Lubricating oil should be added to each rotating joint, and the lubricating oil at the bearing should be replaced every three months (melting point of grease ≥100℃).
3, The instrument should be wiped clean after each use.
4. When replacing the impeller and stator, first unscrew the impeller, then loosen the fastening screws connecting the stator to the lower body, and finally install the new impeller and stator.
5. When moving the flotation machine, the force application points should be on the machine body, not on any components, to avoid damage. 6. The operating temperature of the flotation cell is 15-50℃. Item included:134165

Mineral Processing Equipment Laboratory Flotation Machine 220V 90w

Buy Now

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.


Related Userbars
       

More items on eBay

As an eBay Partner, userbars.org may earn a commission from qualifying purchases.



All userbars are property of respective authors.
Copyright © 2002 4homepages.de | Template © 2005 Bali Web Design