220V Automatic Lifting Vertical High-Speed Disperser Grinder Mixer Machine

HayWHNKN®220V Automatic Lifting Vertical Disperser & Grinder MachineProduct Overview

Laboratory high-speed dispersing machine is a newly developed high-performance product of our company according to the development trend of international advanced dispersion equipment. The equipment integrates dispersion function and stirring function, and completes the two processes of dispersion and homogenization by one machine and one container. High efficiency, good mixing effect, easy to clean. It is widely used in the dispersion and stirring of materials in liquids such as factories, scientific research institutions, colleges and universities, and medical units.

Working Principle

This equipment adopts electronic constant force speed regulation line, digital direct display shaft speed, and equipped with dispersing impeller and sand grinding disc. It can adapt to different test needs of the laboratory, and can provide correct process data for large-scale production according to the relationship between the displayed shaft speed and the viscosity of the material and the rate of chemical reaction.

The dispersing head of this machine is driven by the high speed of the motor, generating a rotational tangential high linear speed, and the material produces strong hydraulic shear and high-frequency mechanical effects under the action of huge centrifugal force, so that the fluid material bears thousands of shears and high-frequency mechanical effects per minute, so as to achieve the effect of efficiency mixing, dispersion and homogenization.

Product ParametersPower400 WSpeed Control Range100 – 8000 rpmLifting Stroke27 cm (10.63 in)Supply Voltage220V / 50HzDisperse Diskφ5 cm / 6 cm (φ1.97 in / 2.36 in)Dimensions45 * 40 * 80 cm (17.72 * 15.75 * 31.50 in)Weight38 kg (83.78 lbs)Precautions

1. During lifting or lowering, never insert hands or tools into the working area of the dispersion disk to prevent pinching or entanglement injuries.

2. If any abnormal vibration, unusual noise, or burning smell occurs during operation, stop the machine immediately and inspect it. Do not resume operation until the fault has been identified and resolved.

Product Features

1. The lift-type disperser is a stirring equipment mainly used for crushing, dispersing, emulsifying and mixing liquid raw materials with different viscosities, through the high-speed operation of the upper and lower sharp teeth of the dispersion disc. It is an efficient equipment for stirring, dispersing and dissolving solids such as coatings.

2. The lift-type disperser is widely used in the stirring, dispersing and dissolving processes of chemical products such as coatings, inks, pigments and adhesives.

3. The lift-type disperser consists of four parts: electric control lifting mechanism, main frame, motor stirring unit and speed control instrument. All parts have a compact and reasonable structure.

4. The lift-type disperser is safe and reliable, easy to operate, maintain and install. With an exquisite and compact appearance, it is an ideal preferred mixer for laboratory dispersion processing, upgraded from the original manual lifting type.

Product Details and Advantages

1. Motor: As the power core of the equipment, it provides driving force for dispersion and stirring operations, runs stably, and ensures the high-speed rotation of the dispersion disc to complete material processing.

2. Lifting Control System (Built-in Pulley Assembly): It realizes the automatic lifting movement of the machine head, driven by the internal pulley assembly. The lifting operation is smooth and steady, no manual lifting of the machine head is required, making it convenient to replace, take and place material containers.

3. Speed Control Instrument: It is used to adjust the running speed of the equipment, with a timing function that allows setting the working duration as needed. It can intuitively monitor the operating status of the equipment, is easy to operate, and helps to control the material dispersion process.

4. Stainless Steel Dispersion Impeller: As the working part in direct contact with materials, it is made of stainless steel, which is corrosion-resistant to various chemical materials. It completes the operations of material crushing, dispersion, emulsification and mixing at high speed.

5. Clamp Holder: It is used to fix the material bucket, with adjustable clamping force to firmly lock the container, preventing the material bucket from shifting and shaking during the stirring and dispersion process, ensuring safe and stable operation.

6. Main Frame: It is the supporting frame of the whole machine, with firm structure and high rigidity. It carries all components such as the motor and lifting mechanism, so that the whole machine is not easy to shake during operation, maintaining the overall working stability of the equipment.

Operating Instructions

1. When using, fix the selected sand grinding disc or dispersing impeller with the rotating shaft.

2. Adjust the high position of the hinge and capacity, lock the motor base and container, put in the material and cover the container cover.

3. Turn on the power, turn on the switch, wait for the display to reset to the zero position, and then press the touch button to increase or decrease according to the required speed.

4. This motor is a series motor, and the friction of the carbon brush will produce sparks when rotating, and the explosion-proof workshop is not suitable for use.

5. It is forofferden to open the empty machine.

6. When the motor brushes are less than 10mm, they should be replaced.

Product Presentation & DetailsItem Included (022152)

• 220V Automatic Lifting Vertical Disperser & Grinder Machine *1

Shipping & Handling DetailsDefault Shipping Cost or Free Shipping Information:

• Default shipping cost or free shipping service is only for the lower 48 United States by UPS Ground or USPS. Other areas or needs other shipping ways, please contact us.
• Buyers from Guam, Puerto Rico, Virgin Islands, American Samoa, Alaska, Hawaii, PO Boxes, APO/FPO addresses or other countries/areas, there WILL be extra shipping costs, please contact us for more detailed information.
• Please make sure your address is valid for both UPS and USPS services. Any costs incurred because of incorrect or undeliverable address should be undertaken by buyer.

Handling Time:

Shipping is usually made in 1-3 business days after payments cleared. Orders are processed from Monday-Friday; Not on the weekends & public holidays.

Sales tax / Customs duties:

Any sales taxes or Customs duties are not included. If came out, they must be undertaken by the buyer. Sales Tax of 8% will be applied for orders shipped within the state of California.

Damage In Shipping:

Email or call us First! We will work with you to get the case resolved in the fastest method.

Return / Refund

If you are not 100% happy with your purchase, please contact Us. Please don\'t directly opened a request or case without informing us, or else, we will do some discounts on the warranty and other sales-services later on. Hope for your understanding.

Returns & Exchanges

• All returns must be made within 14 days of delivery date. Items must be in new, unused condition, with all original materials included with the shipment. A partial refund may be applied for opened or damaged items, depending on the condition.
• Items returned under the buyer’s remorse: The return shipping fee must be covered by the buyer; The original shipping cost will also be deducted from the refund. 15% restocking fee of the items purchase price will be charged.
• Returns that are the result of our seller\'s error: Buyer will receive a full refund of the item as well as shipping charges.
• All returns require a RA (Return Authorization) number that will be given by our seller. Please contact with us at first for more details.

Defective & Damaged Products

• If product was received damaged or not as described, please send us some pictures or videos, so we could well understand your problem, then solve them for you ASAP. Besides, it\'s much helpful for us to claim with UPS, remind our related department to pay much more attention to packaging later on. Hope for your understanding.
• Replacement or refund of defective or damaged products can only be returned in exchange for the exact same product, or else, the purchase price will be refunded back to your original payment method.
• If an item is received damaged, customer service must be contacted within 7 days of receiving your item. All returns require a RA (Return Authorization) number as above.

Payment

eCheck Issues: Payments via eCheck do not clear immediately. Usually you will wait 5-7 days after checkout for it to clear. Then we will arrange shipments for you.

Warranty & response

• 6 months\' warranty for the machines, not for the consumables. We stand behind our products all the item, so even if your warranty period has expired, you can still seek for service or technical support from us with low cost.
• Any warranty shipping cost to us is responsible by buyer.
• Any shipping cost to buyer is responsible by the seller.
• We committee to the customer satisfaction and want to bring you the best purchase experience. If there is any problems, please contact us ASAP. If not, please leave us a positive response as it\'s very important for us. Thanks very much.

On Oct 19, 2026 at 19:37:25 PDT, seller added the following information:

On Oct 19, 2026 at 23:16:27 PDT, seller added the following information: