Inclined Type Helical Portable Spring Conveying Feeder 220V
illuSiyame
Product OverviewThe Auger Conveyor is suitable for transferring a range of s from ground level to packaging or filling machines or various applications, the product-feed of the conveyor is controlled to retain the product level in the product-hopper.Application:dry pellet pet food;Dry ;suit for food industries,ipharma industries and others.Screw drive feeding machine form a complete set of auxiliary machinery required for plastic processing machinery, is indispensable in the process of blow molding machines feeding auxiliary equipment or granular plastic raw materials can be automatic transfer directly to the inside the hopper, adjust the mixing machine is special equipment contact materials are stainless steel, in conveying process of raw material is not polluted, not into any foreign body, can make the production process to realize the automatic closed.Product of discharge outlet from ground:66.93\"(1.7m)Capacity(Change according to material density): 441-661lb/min(200-300kg/min)Inlet size: 27.36\"*27.36\"(69.5cm*69.5cm)Phase number:1Machine material:201 stainless steel Discharge outlet diameter:3.15\"(8cm)Product size: 75.59\"*29.53\"*83.07\"(192*75*211cm)
Note: if you have other requirements, you can contact us to customize the machine
⚠ Notice:Do not feed hard foreign objects (e.g., stones, metal pieces) with a diameter over 20 mm (0.79 in) into the hopper. Hard objects may jam the auger at the bottom motor and cause the conveyor spring to break. Friable/brittle materials over 20 mm that can be easily crushed are acceptable. Damage caused by hard foreign objects is not covered under warranty.
Method of wire connection
Warning:Before use, please follow the instructions in the manual to standardize the wiring, and do not arbitrarily connect without permission, otherwise the equipment will be damaged! ! !
I.The overall picture of the machine\'s three wires is shown below.
II.The spring feeding electrical wire is shown in the following figure.
III.The wire ② and wire ③ respectively with a utility knife or pliers to peel off the outside of a layer of rubber,Both wire ② and wire ③ have four different colored wires exposed.Connect two wires of the same color (For example, blue wires are connected with blue wires, and yellow wires are connected with yellow wires),Then wrap the joint properly with insulation tape to prevent leakage.
IV.Connect line A in line ① to the live wire and line B to the naught wire,As shown in the figure below. (Note:The brown line is the live wire, the blue line is the naught wire, do not connect these two lines together!!)
In simple terms, it is to connect the ② wire with the ③ wire according to the corresponding color, and then connect the two wires of the ① line to the live wire and the naught wire respectively. If you have other details, please contact us!
Product Features & Advantages- installation is convenient and portable, such as more material mixing machine using the same material, just one machine at the same time for material mixing machine feeding, more trouble from artificial processing, is more efficient to make it more safe and more time-saving feeding;It reduces the labor intensity of the workers.
- the design is reasonable, the operation and maintenance is convenient, compared with the vacuum feeding machine, it can avoid the trouble of cleaning the filter regularly.
- The machine can be used in a wide range of materials, which can be used to mix the granules of materials and crusher. It can also be used in the transportation of granules in the process of pharmaceutical chemical production.
- Less energy consumption, only about one third of the stainless steel used in traditional vacuum feeding machine, with a more durable.
- Lightweight stainless steel material, lighter weight, more convenient to move and handle the machine. Product PictureItem Included(056005)Spring Feeder *1The wiring diagram *1
You can make order with no worries..
Any concerns just feel free to let us know, we\'ll reply in 24 hours in normal condition.
Handling Time: Shipping is usually made in 1-3 business days after payments cleared. Orders are processed from Monday-Friday; Not on the weekends & public holidays.
Warranty: 6 months\' warranty for the machines, not for the consumables.
We stand behind our products all the item, so even if your warranty period has expired, you can still seek for service or technical support from us with low cost.
Shipping & Handling Details
Default Shipping Cost or Free Shipping Information:
▲Default shipping cost or free shipping service is only for the customers from Canada or the lower 48 United States by Canada Post, USPS or the UPS Ground. Customers from other areas or needs other shipping ways, please contact us.
▲Buyers from Guam, Puerto Rico, Virgin Islands, American Samoa, Alaska, Hawaii, PO Boxes, APO/FPO addresses or other countries/areas,there WILL be extra shipping costs, please contact us for more detailed information.
▲Please make sure your address is valid for both UPS and USPS services. Any costs incurred because of incorrect or undeliverable address should be undertaken by buyer.
Handling Time:Shipping is usually made in 1-3 business days after payments cleared. Orders are processed fromMonday-Friday; Not on the weekends & public holidays.
Sales tax / Customs duties:Any sales taxes or Customs duties are not included. If came out, they must be undertaken by the buyer.
Damage In Shipping:Email or call us First! We will work with you to get the case resolved in the fastest method.
Return / Refund
If you are not 100% happy with your purchase, please contact Us. Please don\'t directly opened a request or case without informing us, or else, we will do some discounts on the warranty and other sales-services later on. Hope for your understanding.
Returns & Exchanges
▲All returns must be made within 14 days of delivery date. Items must be in new, unused condition, with all original materials included with the shipment. A partial refund may be applied for opened or damaged items, depending on the condition.
▲Items returned under the buyer’s remorse: The return shipping fee must be covered by the buyer; The original shipping cost will also be deducted from the refund. 15% restocking fee of the items purchase price will be charged.
▲Returns that are the result of our seller\'s error: Buyer will receive a full refund of the item as well as shipping charges
▲All returns require a RA (Return Authorization) number that will be given by our seller. Please contact with us at first for more details.
Defective & Damaged Products
▲If product was received damaged or not as described, please send us some pictures or videos, so we could well understand your problem, then solve them for you ASAP. Besides, it\'s much helpful for us to claim with UPS, remind our related department to pay much more attention to packaging later on. Hope for your understanding.
▲Replacement or refund of defective or damaged products can only be returned in exchange for the exact same product, or else, the purchase price will be refunded back to your original payment method.
▲If an item is received damaged, customer service must be contacted within 7 days of receiving your item. All returns require a RA (Return Authorization) number as above.
Payment
eCheck Issues:Payments via eCheck do not clear immediately. Usually you will wait 5-7 days after checkout for it to clear. Then we will arrange shipments for you.
Warranty & response
▲6 months\' warranty for the machines, not for the consumables. We stand behind our products all the item, so even if your warranty period has expired, you can still seek for service or technical support from us with low cost.
▲Any warranty shipping cost to us is responsible by buyer.
▲Any shipping cost to buyer is responsible by the seller.
▲We committee to the customer satisfaction and want to bring you the best purchase experience. If there is any problems, please contact us ASAP. If not, please leave us a positive response as it\'s very important for us. Thanks very much.
On Jun 20, 2025 at 18:18:49 PDT, seller added the following information:
On Nov 3, 2026 at 22:31:09 PST, seller added the following information:
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.