Product Specifications:
Model: ZQ10133
Color: black + orange
Material:Aluminum alloy
Input voltage: AC110V/240V/ 50/60Hz
Rated power: 1500W
Lamp beads: 18PCS three-in-one high power lamp beads
Control protocol: 433MHz
Effective control distance: about 15 meters
Control mode: remote control
Heating time: the first heating of the boot about 2-3 minutes, the subsequent cycle of heating about 40 seconds
Smoke time:15-50 seconds
Smoke Spraying Distance:3-5m
Oil pot capacity: 1L
Spraying time:about 50 minutes
Protection grade:IP30
Working environment:-10℃-45℃
Product Features:
1. A multi-functional fog machine that produces fog while lighting, ready to assist in making the beam or lighting effect visible and creating a specific mood or atmosphere to entertain the audience.
2. Remote control. Can be started from a distance using a wireless remote control, suitable for different occasions.
3. Easy to carry. Easy to use, compact, portable handle, easy to carry and durable.
4. Sufficient reservoir capacity (1L), superb fog production capacity (3-5 meters spraying distance).
5. Wide range of uses. Widely used in entertainment venues to enhance the lighting effect, such as live events, theaters, concerts, nightclubs, weddings, raves, also often used for family gatherings or Halloween displays, such as haunted houses or forests.
Precautions:
1. The hood must be placed in a ventilated area and not in a hole during use, otherwise the temperature of the hood will be too high and then the hood will not be heated due to the cut of the temperature control fuse.
2. The ventilator can be placed on the ground or installed overhead, parallel to the ground, but not tilted; be careful to leave enough space for heat dissipation around the ventilator, at least 30 cm.
3. Please keep this product out of reach of children and away from flammable and explosive materials; 40 cm away from the ventilator to avoid burns.
4. All smokers will emit a small amount of smoke during the heating process (some even have a slight burnt smell), which is normal.
5. If any of the following conditions occur, such as reduced smoke, noisy suction pump or inability to emit smoke, please turn off the power immediately. Also, check the stock of smoke liquid, fuse, cable and power plug. If the problem cannot be solved, please contact your dealer.
Caution:
1. This product is in heating condition during use. The high temperature of the machine is normal, please do not touch it with your hands.
2. This product should be used in a proper place. No liquid should penetrate inside the machine (only in the oil bottle). In case of accidental penetration, please turn off the power immediately and wait for the machine to dry before using.
3. Keep away from flammable and explosive materials when using this product.
4. When the liquid in the oil bottle is about to run out, add smoke liquid immediately, otherwise continue working will damage the machine.
5. When the machine is working, please do not touch the smoke vent and the bottom of the machine directly with your hands to prevent burns.
6. After use, it should be packed and stored after cooling.
7. Turn off the machine when no one is present.
Packing List:
1. Smoke machine *1
2. Power cord *1
3. Remote control *1
4. Instruction manual *1
Specifications:
Model: ZQ10136
Color: black
Material:Aluminum alloy structure/plastic shell
Voltage: AC110V/220V50/60HZ (according to the region)
Power: 2000W
Lamp beads: 8 + 8 3W RGB 3 in 1 LEDs
Smoke spray angle: adjustable
DMX Channel: 13CH
Control model:remote control, DMX512 console, manual screen control (Light color change can be controlled by remote control or manual screen, using DMX512 controller can realize the program automatically change color)
Warm-up time: 3 minuet
Heating time: it takes 1 minute to heat up for the first time, and 30-40 seconds for subsequent use.
Oil drum capacity: 2.5 liters (about 1h continuous spraying)
Spraying distance: about 8 meters
Protection grade:IP30
Working environment:-10℃-45
Remote control distance:10-30M
Smoke spraying height:5-6M
Product Features:
1. Configure two sets of 8+8 3-in-1 LED beads, can mix any color.
2. Two sets of LED beads can emit different colors
3. Adjustable angle of smoke spraying, can spray in any direction (with nozzle adjustment needle)
4. Upside down air column smoke machine
5. Remote control, DMX512 console control, or manual control through the display.
6. LCD display control, more intelligent and easy to use.
Attention:
Please obey all notices about operation. Safety and repair to avoid getting an electric shock and keep the excellent effect.
1. Keep clean.
2. Use in door.
3. The power must same as located.
4. Power off before adding fogger liquid.
5. Put in the horizontal direction and don’t incline and place upside down.
6. Power off or pull out plug after use.
7. No waterproof,if there are some humidity, water or fog liquid in it, please switch off power and contact distributor as soon as possible.
8. There are no spare parts with machine. If you need to repair it, please contact distributor or professional repair works.
Avoid fire:
1. Only for adults operate. Equip it over the touch of children and pay more attention during operation.
2. Don’t spray it to people directly and far away fire.
3. The temperature of smoke is very high so that keep the space between machine and other material things more than 100cm.(surface temperature of machine is 40-80℃,don’t touch)
4. Put the machine at a drafty place and don’t cover the cool holes to keep the best cool effect. Keep the space between the fog machine and around things more than 20cm and between smokemachine and tinder more than 20cm. And without easily burnt things within 300cm(far away carpet,board & inflammable).
Avoid explode:
1.Don’t add tinder liquid such as oil,gas ,perfume and etc. in fog machine.
2. Pay more attention to all notices sign and operation instructions on all machines.
3. Please use the high quality fog liquid recommended by distributors. Bad quality fog liquid may get blast or spray oil.
4. Often check whether there has enough fog liquid.
5. Get out all fog liquid before transport or post.
6. Don’t eat fog liquid otherwise to see the doctor immediately. Use clean water to wash skin and eyes once fog liquid touches them.
Installation:
1. Take away all pack material especially the spray mouth.
2. Set in the horizontal direction and open the cover of liquid can.
3. Add high quality fog liquid in the machine and screw the cover of liquid can. Bad quality fog liquid will damage fog machine
4. Plug the plug of remote console in the socket of the back of machine.
Repair:
1. Please clean the fog machine timely to avoid the damage of spare parts and decrease the repair charge.
2. Don’t make the fog machine be dirty. Screw the cover of liquid can after add fog liquid.
3. After about 40 hours continually use, please use 80% distilled water and 20% vinegar to clean the dirty in refractory pipe.
4. Disassemble the spray mouth and use vinegar to clean it to keep expedite before heat.
5. Reequip the spray mouth after cool and add fog liquid for next use.
Packaging list:
1. Fog machine * 1
2. Power cord * 1
3. Signal line * 1
4. Remote control * 1
5. Cone needle * 1
6. Instruction manual *1
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.