(2000P/R) PNP Incremental Encoder 50mm Outer Diameter 2 Phase

Feature:

1. RADIAL AND AXIAL LOAD: The two phase incremental encoder has radial load less than or equal to 30N and axial load less than or equal to 20N, and the protection level is IP50.
2. WEAR RESISTANT: Our incremental encoder is wear resistant, strong in load bearing capacity, robust and effective in protecting the main body of the gear box motor.
3. SAFE AND STABLE: Two phase incremental encoder is high temperature resistant and stable, which can be used safely.
4. COMPACT AND SMALL SIZE: Two phase incremental encoder is small in size, light in mass, compact in structure, easy to install, etc.
5. WIDE RANGE OF USE: Our encoder is suitable for intelligent control of all kinds of drainage measurement, automatic fixed length leather, automatic paper cutter, steel cutting length control, measuring height human scale and robot.

Specification:

Item Type: Encoder
Material: Stainless Steel, ABS
Operating Voltage: DC5-24V
Output Mode: Push Pull Output F (PNP)
Encoder Outer Diameter: Approx. 50mm / 2in
Radial Load: ≤30N
Axial Load: ≤20N
Starting Torsion: ≤2x10 Negative Cubic N.M
Maximum Speed: 6000r/Min
Rotational Inertia: 20g/Cm²
Allowable Angular Acceleration: 2x10 biquadrate Rad/S
ShockResistance: 1000m/S².6ms
AntiVibration: 1000m/S².10-200Hz
Operating Temperature: -10℃-+70℃
Storage Temperature: -20℃-+80℃
Relative Temperature: <RH85% Without Frost
Protection Grade: IP50

Package List:

1 x IncrementalEncoder

3 x Screw