|
>> If you dont know how to design a userbar, then write here a Userbar that you want.
>> If you know how to design them help these people and design what they request.
|
 |
 |
USERBARS.org | Free Forum Userbars
| On eBay now |
2000 sealed reel Microchip Atmel ATSAMC20E15A-AUT 32bit ARM M0+ Microcontroller
$1,900.00

Brand new, old stock, environmentally controlled storage. - ARM Cortex-M0+ CPU running at up to 48MHz
- Peripheral Touch Controller (PTC)
- Single-cycle hardware multiplier
- Micro Trace Buffer
- Memory Protection Unit (MPU)
- Power-on reset (POR) and brown-out detection (BOD)
- Internal and external clock options with 48MHz to 96MHz
- Fractional Digital Phase Locked Loop (FDPLL96M)
- 16 external interrupts
- One non-maskable interrupt
- Two-pin Serial Wire Debug (SWD) programming, test and debugging interface
- Idle, standby, and off sleep modes
- SleepWalking peripherals
- 6-channel Direct Memory Access Controller (DMAC)
- 6-channel Event System
- One 16-bit TC with compare/capture channels
- One 8-bit TC with compare/capture channels
- One 32-bit TC with compare/capture channels, by using two TCs
- Up to four compare channels with optional complementary output
- Generation of synchronized pulse width modulation (PWM) pattern across port pins
- Deterministic fault protection, fast decay and configurable dead-time between complementary outputs
- Dithering that increase resolution with up to 5 bit and reduce quantization error
- Frequency Meter
- 32-bit Real Time Counter (RTC) with clock/calendar function
- Watchdog Timer (WDT)
- CRC-32 generator
- USART with full-duplex and single-wire half-duplex configuration
- I2C up to 3.4MHz (Except SERCOM6 and SERCOM7)
- SPI
- LIN master/slave
- RS-485
- One Configurable Custom Logic (CCL)
- Differential and single-ended input
- Automatic offset and gain error compensation
- Oversampling and decimation in hardware to support 13-, 14-, 15- or 16-bit resolution
- Two Analog Comparators (AC) with window compare function
- Integrated Temperature Sensor
- 256-Channel capacitive touch and proximity sensing I/O
- Up to 26 programmable I/O pins
- Drop in compatible with select SAM D20 and SAM D21
- 2.7V – 5.5V

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
|
|
|
 |
 |
|