2; OEM AVITAL FCC ID EZSDEI474S Keyless Remotes Key Fobs Alarm Entry Control

See pictures for an example of what you will receive.

Pair of TWO (2)

Aftermarket remote keyless entry fob alarm

Transmitter control clicker keyfob controller replacement

Functions at 100% Tested & Guaranteed

Directed Electronics Inc. (DEI)

Avital

FCC ID: EZSDEI474S

( Alternate Spelling: EZSDE1474S )

Interchangeable FCC IDs:

EZSDEI474

EZSDEI474S

Part #: 7143L

Interchangeable Part #s:

470

474

475

476

485

820041

7143

26131

SAA474U

Frequency: 433 – 434 MHz

LED color: Green

4 buttons

Battery: (1) CR 2032

Please Note:

A Valet / Programming switch is required to program this remote.

Programming can be difficult if you are not familiar with it. Please read the programming instructions (below) before purchasing. Assistance from an auto specialty shop or locksmith may be needed.

Compatible w/ the following systems:

Automate

6

7

10

25

35

410

425

435

52

53

552

553

Avital

2100

2200

2300

3100

3200

3300

4000

4100

4200

4300

4400

Maxx2

Maxx3

Hornet

533 T

554 T

740 T

742 T

851 T

Python

400 HP

440 HP

450 ESP

460 HP

500 HP

625 HF

650 ESP

660 XP

700

900

1000 HF

PC 1000 HF

1200 XP

1400 XP

1500 HF

1600 XP

2000 HF

3000 HF

3000 ESP

Sidewinder

3000 HF

3000 ESP

3200 HS

3300 HS

3500 ESP

4500 HF

5000 HF

5000 ESP

5500 XS

6000 HF

6000 ESP

6500 HF

6500 ESP

7000 HF

7000 ESP

PC 7000 SHF

Rattler

100

110 D

200

210 D

250

259 R

300

310 D

359 R

369 D

Valet

450 R

519 H

551 R

552 T

562 T

561 R

712 T

716 T

Merlin

2000

Viper

100 HF (ESP)

130 HV

150 ESP

160 XV

210 HV

211 HV

300 HF

PC 300 HF (ESP)

300+ HF

330 V

350 HV

500 HF

PC 500 HF (ESP)

550 HF

550 HF (ESP)

560 XV

571 XV

600 HF

PC 600 HF (ESP)

650 XV

671 XV

700 ESP

771 XV

PC 800 SHF

800 SHF ESP

850 XV

1000

1002

3000

3002

5000

5002

7900

Programming Instructions:

The vehicle’s system can store up to 4 transmitters (remotes) into memory. Use the following programming routine to add transmitters to the vehicle’s security system or to change button assignments if desired.

In order to enter Learn Routine, the Valet/Program push button must be plugged into the main brain\'s Blue 2 Pin Port (Look for a small black push button located under the drivers dash or drivers kick panel somewhere).

The Valet/Program switch, plugged into the blue port, is used for programming. There is a basic sequence of steps to remember whenever programming this unit.

1) Open a door and make sure the dome light is on.

2) Turn the ignition on to the RUN position or you may also start car.

3) Within 10 seconds, press and release the Valet/Program switch the number of times that corresponds to the desired channel (listed below). Once you have selected the channel, press the switch once more and HOLD it. The LED will flash and then the horn will chirp (if connected) to confirm the selected channel. Do not release the Valet/Program switch.

CHANNEL #

FUNCTION

1

Arm / Disarm / Panic

2

Silent Mode / Remote Valet / Trunk Release

3

Remote Start or other accessories

4

Arm only (4 button remote)

5

Disarm only (4 button remote)

6

Panic only (4 button remote)

7

Auto Program single Arm – Disarm – Panic button configuration (4 button remote)

8

Auto Program this remote

9

Delete all transmitters

CHANNEL 9:

If any transmitter button from a known transmitter is programmed to channel 9, all transmitters will be erased from memory. This is useful in cases when one of the customer’s transmitters is lost or stolen. This will erase any lost or stolen transmitters from your system’s memory. It can also be used to start from scratch if the transmitter buttons were programmed incorrectly.

4) You can advance from programming one channel to another by releasing the Valet/Programming switch and tapping it to advance channels and then HOLDING it. For instance; you have programmed Channel 1 and you want to program Channel 2. Release the Valet/Program switch. Press it one time and release it to advance from Channel 1 to Channel 2. Now, press and HOLD the Valet/Program switch. The LED will flash 2 times and the horn will chirp twice (if connected). As before, do not release.

5) Once the code(s) are learned, the Valet/Program push button can be released.

6) Programming mode will be exited if one of the following actions occurs:

a. Ignition key is turned to the OFF position

b. Valet/Program switch is pressed too many times.

c. More than 15 seconds elapses between programming steps.

Payment: We accept payment via PayPal or Credit Card. Please contact us via messages for any questions concerning payments. Payment is expected within 5 days.

PA SALES TAX: As per the State of PA Franchise Board we must collect sales tax from PA Residents for any purchase made from our store.

Contact/Email: Due to scams etc, we DO NOT respond to emails. We only read/respond to MESSAGES. Messages & Best Offers are checked throughout the day & we typically respond 7 days a week. Please contact us with questions via messages (keyless4u).

100% Guarantee Remote Shipping / Return Policy

1. We have a 30 day return policy.

2. All returns for replacements and refund need an RMA #.

3. Please contact us before returning items so we can give you theRMA # and the proper return address.

4. No refunds / replacements will be granted without an RMA#

We ensure proper working condition of all previously used or new remotes through a serious of tests performed with the Santronics Testing device. Each button is tested for functionality prior to shipment and then logged.

Does this keyless remote entry come with a battery?

Yes. It will have a working battery installed.

Battery Condition:

Your vehicle will be installed with one of the following keyless entry systems:

The above information can change which remote you need
for your installed remote keyless system.