|
>> If you dont know how to design a userbar, then write here a Userbar that you want.
>> If you know how to design them help these people and design what they request.
|
 |
 |
USERBARS.org | Free Forum Userbars
| On eBay now |
2" Flood Wide Cornering LED HitchMount Reverse Light Kit w/Trailer Hitch Harness
$109.98

Features:2,000+ Lumens, Utilizing 2 LEDTheoretical PowerWhite light: 10W; Red light: 10WActual CurrentWhite light - Reverse light: 0.5ALow - brightness red light - Running light: 0.5AActual PowerWhite light - Reverse light: 6WLow - brightness red light - Running light: 6WColor Temp: 6000K & 1000KOperating Voltage: 12 - 24V DC Operating Temperature: -40°C ~ +80°C LED Emitter: Luminous Connector: Deutsch DT InputDriver Features: Constant CurrentMaterials: Polycarbonate Lens, Aluminum CastingCooling: Passive, 7pcs Pin-Fin heatsink ComplianceIntrusion Ratings: IP67 WeatherproofFunctions: Reverse & Turn Signal Lighting 2\" Flood Wide Cornering LED HitchMount Reverse Light Kit w/Trailer Hitch HarnessDescription:This kit is completely plug-and-play for vehicles with a 2in trailer hitch and 7-pin trailer connectors. If your trailer connector is not 7-pin, this kit will still work for you but will require slight modification to the harness.Newer trucks with trailer management systems monitor the power draw on the trailer connector to automatically modify vehicle settings when a trailer is connected. Depending on the year and make of your vehicle, the HitchMount LED may interact with this system if equipped.GM/Chevy: We have a vehicle-specific kit compatible with 2019+ GMC Sierra 1500/Chevrolet Silverado 1500 and 2023+ Chevrolet Colorado.Jeep: No trailer is detected messages, no warning messages.Toyota: This product is not compatible with the 2005-2015 Tacoma. We have a vehicle-specific kit compatible with 2005-2015 Tacoma. No trailer detected messages, no warning messages on all other models.Ford: We have a vehicle-specific kit compatible with 2015-2020 Ford F-150, 2021-2023 Ford F-150 and 2022-2024 Ford Maverick.Note: If you would like to use a locking trailer pin to install this kit instead of the snap-fit pins, you can do so with a quick modification. This product is not intended to replace original factory tail lamps. Please ensure your trailer hitch has an open back before ordering.Add significantly more light output when backing up at night with a HitchMount Reverse Light Kit! - Adds a powerful reverse lightand additional running light.
- Simple 5-minute installation, with no need for custom wiring or routing wires.
The hitch light kit is a powerful and versatile lighting solution for outdoor enthusiasts and off-road adventurers. This compact and rugged system features a high-performance LED light, mounted in a durable bracket that easily attaches to any standard 2-inch hitch receiver. we has provided two kit options, allowing the customer to select what is best for their needs. Trailer Hitch Kit (7-Pin trailer connector) If your vehicle has a 7-pin trailer plug connector (reference vehicle fitment chart), you have the option of using the hitch light kit with the trailer adapter harness. This option allows for an easy plug and play installation. When the vehicle is put into reverse the one will automatically illuminate and provide an additional 2,320 lumens of smooth output. Overview1. Brighter Backup. Factory reverse bulbs just don\'t provide enough light output to back up at night confidently. By pairing our patented TIR optics with high-powered LEDs, the one included in this kit provide an additional reverse light that\'s several times brighter than stock bulbs alone. And with a recent upgrade, the LED Pod now delivers 68% more light output, providing even more output when backing up at night! Plus, they automatically come on when the vehicle is put in reverse!2. Additional Running Light. The LED pods included with this kit feature a distinctive red backlight that can be used as an additional running light while driving! The backlight fully illuminates the TIR optic, providing a more unique and modern look than the small indicator LEDs found in other products.3. Everyday Operation. This kit is completely plug-and-play with all 7-pin trailer connectors. The included harness plugs right into your factory trailer hitch wiring for easy installation and operation. The kit operates as an additional red running light with your tail lights, and then automatically switches to a high-power backup light when your vehicle is in reverse.If you would like to have override functionality to manually turn on the reverse light anytime, you will need to purchase the universal backup harness.4. If your trailer connector is not 7-pin, this kit will still work for you but will require slight modification to the harness.5. Some newer trucks feature advanced trailer safety systems that automatically detect when a trailer is connected.6. Functional Output. All beam patterns were designed with optical simulation modeling, to shape the output in a highly-functional beam pattern.7. Flood pattern was designed to provide uniform, even illumination with a full 50x50 degree spread of light on the LED pod. Unlike generic \"flood\" lights that are simply a heavily diffused spotlight, our flood pattern uses pillow optics on the outer lens surface, to provide a true optically designed spread, for even illumination throughout.8. Proven Reliability. The LED lighting has been extensively tested for long-term operation from -40 to 185 degrees F, along with vibration, moisture intrusion, and corrosion testing. All of these tests are completed to SAE standards, just like factory components. They\'ve also been put to the test on-road by racers and enthusiasts alike. Fitment Works with any vehicle equipped with a 7-Pin Trailer Plug. The following vehicles require a vehicle-specific harness that you will need to contact Customer Service in order to obtain. - 2015-2020 Ford F-150
- 2005-2015 Toyota Tacoma
- 2020+ GMC Sierra 1500
- 2019-2022 Chevrolet Silverado 1500
- 2022-2024 Ford Maverick
- 2023+ Chevrolet Colorado
Jeep:No trailer is detected, no warning in the box?HitchMount LED Pod Reverse Lumens, Utilizing 2 LED Theoretical PowerWhite light: 10W; Red light: 10W Actual Current- White light - Reverse light: 0.5A
- Low - brightness red light - Running light: 0.5A
Actual Power- White light - Reverse light: 6W
- Low - brightness red light - Running light: 6W
Color Temp: 6000K & 1000KOperating Voltage: 12 - 24V DCOperating Temperature: -40°C ~ +80°CLED Emitter: LuminousConnector: Deutsch DT InputDriver Features: Constant CurrentMaterials: Polycarbonate Lens, Aluminum CastingCooling: Passive, 7pcs Pin-Fin heatsink ComplianceIntrusion Ratings: IP67 WeatherproofFunctionsThe white - light model is for illumination; the high brightness red - and - low brightness red model is for taillight warning. Product InstallationFixed with brackets and screws; a plug - and - play set. Lighting Control ModeThe original vehicle’s reverse lights / running lights Applicable Vehicle ModelsOnly suitable for vehicles with a trailer bracket opening of 2x2 inches. TIR OpticAdvantages:\"Utilizes high-efficiency TIR optics, increasing brightness by 20% compared to standard reflector designs.\" \"TIR lens technology produces a sharp and clear cut-off line for civilized driving—no glare, enhanced safety.\" \"The beam pattern is uniform and soft, free of stray light, providing shadow-free illumination for Sport rear hitchMount LED Pods with 4-pin DT Connector 2PCS M5*8 Hex Socket Screw 1PCS Silver Zinc Plated M4 Wrench 1PCS Black Plastic Housing / Shell 1x DT to 7-Pin Round Trailer Adapter 1x Pin / Cotter Pin 1x Pin Retainer / Lynch Pin ensure your trailer hitch has an open back before ordering. Please confirm that the opening of your vehicle’s trailer frame is 2x2 inches and equipped with a Uscar 7 - way socket connector!!!Vehicle Compatibility Fits most vehicles with a standard 2\" hitch receiver: - Ford F - Series (Some Models):
- For example, certain heavy - duty versions of the Ford F - 250, F - 350 from the mid - 2000s to the present may have 2x2 - inch trailer frames and be equipped with appropriate trailer connectors. However, you need to check the specific trim level and options. The F - Series has been a popular choice for towing, and many models are factory - equipped or can be easily upgraded to have the necessary towing components.
- Chevrolet Silverado / GMC Sierra:
- Similar to the Ford F - Series, some heavy - duty versions of these trucks, especially those designed for serious towing, such as the 2500 and 3500 models, from around 2005 and later, may meet the requirements. Again, it depends on the specific configuration and whether it was ordered with towing packages.
- Ram Trucks (1500, 2500, 3500):
- Ram trucks, especially the 2500 and 3500 heavy - duty models, have been known for their towing capabilities. Some models from the 2010s and onwards, especially those with higher - end towing packages, may have the 2x2 - inch trailer frame and the Uscar 7 - way socket connector.
2. SUVs with Towing Capabilities - Toyota Sequoia:
- The Toyota Sequoia, a full - size SUV, has decent towing capabilities. Some later - model years (e.g., 2010 and later) with the appropriate towing package may have a 2x2 - inch trailer frame and could potentially be equipped with the right connector.
- Nissan Armada:

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
|
|
|
 |
 |
|