|
>> If you dont know how to design a userbar, then write here a Userbar that you want.
>> If you know how to design them help these people and design what they request.
|
 |
 |
USERBARS.org | Free Forum Userbars
| On eBay now |
2 Axis Controller USB GRBL Control Board For CNC Laser Engraving Machines New
$17.99

Product Parameter -
This control board is a 32-bit MCU control board, which runs faster, the maximum no-load speed reaches 40000mm/min, the algorithm is optimized better, the vibration is smaller when the machine moves at high speed, and the performance is more stable; - Using the Type-B USB interface, it is more convenient to use and the data transmission is more stable;
- One-piece integrated drive
- PWM output frequency 10kHz, higher engraving precision and clearer details
- Y-axis dual drive, stronger drive capability;
- Support USB automatic identification, when plugged in USB and connected to the computer, the offline interface is automatically shielded to avoid offline interference with data;
- 5V power output port, and software controllable, easy to expand various functions;
- Support USB flash firmware, firmware upgrade is more convenient;
- XY limit switch interface each
- Self-contained laser anti-burn mode, laser S value >=100, after the laser is turned on, if there is no movement within 5S, an alarm will occur
Packing List : Control Board + Type-B Cable

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
|
|
|
 |
 |
|