1PCS NEW Automatic Engine Controller GCU-20 For Generator Control Unit 50/60 Hz

Feature：

GCU-20 Automatic Engine & Generator Control Unit has many useful functions

It's suitable for pump engine control. GCU-20 also provide IDLE control for electronic governors.

Microprocessor based design

Universal LED graphic interface, displays generator status and failures

Modular design, quick installation

With annunciator alarm output

Selectable MPU signal for speed sensing

Suitable for pump engine control

With lamp test function for all front panel LEDs and annunciator lamps

Provide IDLE control for Elec. governors

Five adjustable time delay potentiometers

Six DIP switches for setting different engine parameters

1PCS NEW Automatic Engine Controller GCU-20 For Generator Control Unit 50/60 Hz

Feature：

GCU-20 Automatic Engine & Generator Control Unit has many useful functions

It's suitable for pump engine control. GCU-20 also provide IDLE control for electronic governors.

Microprocessor based design

Universal LED graphic interface, displays generator status and failures

Modular design, quick installation

With annunciator alarm output

Selectable MPU signal for speed sensing

Suitable for pump engine control

With lamp test function for all front panel LEDs and annunciator lamps

Provide IDLE control for Elec. governors

Five adjustable time delay potentiometers

Six DIP switches for setting different engine parameters

ix DIP switches for setting different engine parameters

DC Supply Voltage 9 to 36VDC

Alternator Input Range Voltage 5~300 VAC

Frequency 50/60 Hz

MPUSignal Input Range ±2V to 70V Peak

Rated MPU Frequency 100Hz ~ 10,000Hz

Fuel Solenoid Signal Output 10 Amp @ 12/24VDC

Start Signal Output 10 Amp @ 12/24VDC

Annunciator Output 300mA @ 12/24VDC

Power Consumption Under 3 watts

Protection & Alarm Status Indicators

Start Failure

High Water Temp.

Low Oil Pressure

No Speed Prog. Input

Adjustable Timers

Engine Pre-Heat : 2~30 Seconds

Starter Cranking Time : 1~15 Seconds

Energize to STOP : 1~15 Seconds

Engine Idle (Governor) : 0~300 Seconds

ngine Cool-Down : 0~300 Seconds

Environment Operation Temperature -20~70°C

Storage Temperature-35~85°C

Relative Humidity Max. 90%

Dimensions 88.0 x 88.0 x 37.5 mm

Weight 206 g ±2%

Package List:

1 piece Automatic Controller GCU20 GCU-20

Item SpecificsCountry of Origin United StatesBrand findmallMPN IN6081777ALType Automatic ControllerWarranty 1 YearManufacturer Part Number GCU-20Alternator Input Range Voltage 5~300 VACMPUSignal Input Range ±2V to 70V PeakRated MPU Frequency 100Hz ~ 10,000HzEngine Pre-Heat 2~30 SecondsEngine Idle (Governor) 0~300 Seconds
Introduction of Promotion

Fold over fold

Payment

Shipping

Usually your Items will be shipped within 1-3 business day after your payment is cleared.

Returns

Refund is valid within 30 days after thepayment date

Item must be returned in original packing same as reached

Contact Us If you are satisfied with the product you received,please leave us positive response and 5 scores .Please give us the opportunity to resolve any problem. We understand the concerns and frustrations you might have, and will try our best to resolve the issues.We care about our valued customers, and will always try to help you.

CNCHand ToolsMetalworking SuppliesGenerator AccessoriesIndustrial Control Module 1PCS NEW Automatic Engine Controller GCU-20 For Generator Control Unit 50/60 Hz

Feature：

GCU-20 Automatic Engine & Generator Control Unit has many useful functions

It's suitable for pump engine control. GCU-20 also provide IDLE control for electronic governors.

Microprocessor based design

Universal LED graphic interface, displays generator status and failures

Modular design, quick installation

With annunciator alarm output

Selectable MPU signal for speed sensing

Suitable for pump engine control

With lamp test function for all front panel LEDs and annunciator lamps

Provide IDLE control for Elec. governors

Five adjustable time delay potentiometers

Six DIP switches for setting different engine parameters

ix DIP switches for setting different engine parameters

DC Supply Voltage 9 to 36VDC

Alternator Input Range Voltage 5~300 VAC

Frequency 50/60 Hz

MPUSignal Input Range ±2V to 70V Peak

Rated MPU Frequency 100Hz ~ 10,000Hz

Fuel Solenoid Signal Output 10 Amp @ 12/24VDC

Start Signal Output 10 Amp @ 12/24VDC

Annunciator Output 300mA @ 12/24VDC

Power Consumption Under 3 watts

Protection & Alarm Status Indicators

Start Failure

High Water Temp.

Low Oil Pressure

No Speed Prog. Input

Adjustable Timers

Engine Pre-Heat : 2~30 Seconds

Starter Cranking Time : 1~15 Seconds

Energize to STOP : 1~15 Seconds

Engine Idle (Governor) : 0~300 Seconds

ngine Cool-Down : 0~300 Seconds

Environment Operation Temperature -20~70°C

Storage Temperature-35~85°C

Relative Humidity Max. 90%

Dimensions 88.0 x 88.0 x 37.5 mm

Weight 206 g ±2%

Package List:

1 piece Automatic Controller GCU20 GCU-20

Item SpecificsCountry of Origin :United StatesBrand :findmallMPN :IN6081777ALType :Automatic ControllerWarranty :1 YearManufacturer Part Number :GCU-20Alternator Input Range :Voltage 5~300 VACMPUSignal Input Range :±2V to 70V PeakRated MPU Frequency :100Hz ~ 10,000HzEngine Pre-Heat :2~30 SecondsEngine Idle (Governor) :0~300 Seconds
Introduction of Promotion

Fold over fold

Payment

Shipping

Usually your Items will be shipped within 1-3 business day after your payment is cleared.

Returns

Refund is valid within 30 days after thepayment date

Item must be returned in original packing same as reached

Contact Us If you are satisfied with the product you received,please leave us positive response and 5 scores .Please give us the opportunity to resolve any problem. We understand the concerns and frustrations you might have, and will try our best to resolve the issues.We care about our valued customers, and will always try to help you.

All rights reserved.

Hot Item ER11/ER16/ER20/ER25/ER32/ER40 Spring Collet Set For CNC Milling Lathe Machine USD 16.81 4 Piece 4 Inch Heavy Duty Caster Set Wheels Fits For All Swivel & Brake Casters USD 20.49 12V to 24V 15A 360W Waterproof DC/DC Car Voltage Converter Step Up Regulator USD 15.94 4\" /5\" /6\" /8\" Bench Vise W/ Anvil Swivel Base Heavy Duty Vice Multipurpose USD 33.93 100 Pack 4-1/2\" × 7/8\'\' 40 Grit T29 Premium Zirconia Sanding Grinding Flap Discs USD 51.91 New List Item 2.2 KW VFD 220V 3 HP 1-3 Phase Variable Frequency Drive Inverter Industrial USD 65.40 3 HP 1-3 Phase Variable Frequency Drive Inverter 2.2 KW VFD 220V USD 65.31 PTO Shaft Extension 1-3/8\" 6 Spline Female & Male with Quick Release 75HP USD 60.00 Stainless Steel Cable Tie Tool Gun W/150PCS Metal Zip Ties (5.91\"+7.87\"+9.84\") USD 27.50 2\" x 2\" or 2\" x 3\" Green For Rops Canopy Tractor and Mowers Umbrella 52\" X 52\" USD 177.95 Store CategoryStore Home CNC◈Edge Finder◈Drill Bits◈Spring Collet◈Boring Bar◈Mandrel◈Collet Chuck◈Pull Stud◈Quick Change Tool Post◈Drill Chuck◈Drill Chuck Arbors◈Live Center◈Vise◈Milling Mills◈Other Hand Tools◈Rivet Gun◈Wrenches◈Hydraulic Crimper◈Drill Bits◈Outside Micrometer◈Casters◈Other Metalworking & Manufacturing◈Sanding Disc◈Metal Cut Off Wheels◈Flap Discs◈Hose Clamp◈Welding Wire◈Cable◈Piston Driver◈Other Generator Accessories◈Automatic Voltage Regulator◈Generator Carburetor◈Other Industrial Control Module◈Control Valves◈Roller Chain◈Other◈Electric Motor Decorate◈Conduit Corrugated◈Interior door fittings◈Decoration materials◈Paint Sprayers◈Other Construction Machinery▷Excavator Parts♢Excavator Carburetor♢Engines & Engine Parts♢Seat♢Other Excavator Parts▷Truck Parts♢Tow Chain♢Other Agricultural Equipment▷Tractor Parts♢Other Tractor Parts◈Farm Machinery Accessories Hot-Sale Products Findmall Peripheral Products Brand New Products Other

On Oct 28, 2026 at 21:00:16 PDT, seller added the following information: