Free Userbar - Userbars - User Bar - User Bars
 
Advanced search
Registered users

Username:

Password:

Log me on automatically next visit?

¬ Forgot password
¬ Registration

» Upload Userbar
» Animate Userbar
» Userbars Tutorial
» Userbar Tournaments
» Forum
» Chat Room
» FAQ
» Links

• PC Cheat Codes

>> If you dont know how to design a userbar, then write here a Userbar that you want. >> If you know how to design them help these people and design what they request.




USERBARS.org | Free Forum Userbars

On eBay now
eBay

1PC Microlab/FXR HZ-10F Signal Sampler 50MHz-12GHz Variable Coupling 500W Tested

1PC Microlab/FXR HZ-10F Signal Sampler 50MHz-12GHz Variable Coupling 500W Tested
$89.89

Buy Now

Exact item shown. Microlab/FXR HZ-10F reactive signal sampler with SMA main-line connectors and BNC sample output. Data sheet shown in the photos is included.

I tested this sampler on an HP 8720B vector network analyzer. The through-path insertion loss measured:

  • +0.004 dB at 130 MHz
  • +0.009 dB at 500 MHz
  • -0.015 dB at 2 GHz
  • +0.123 dB at 8 GHz
  • -0.120 dB at 12 GHz
The video shows the analyzer attached to the sample port, and I\'m adjusting the port by sliding it closer and farther from the main line - the effect is very obvious on the analyzer screen. Actual insertion loss of course depends on how close the sampler is to the main line, as it gets closer the sampler port interacts with the main line and adds ripple and increased IL as you can see.

The VNA photos in this listing show the actual measurements. The measured insertion loss is consistent with the Microlab specification of 0.2 dB maximum insertion loss.

Microlab describes the HZ series as a signal sampler consisting of an auxiliary line terminated in a probe connected to a short section of 50-ohm coaxial transmission line. A small portion of the RF energy in the main line is coupled by the probe while the balance of the signal passes through the main line with negligible reflection or attenuation. The coupling between the probe and main line is continuously adjustable and may be locked at any convenient position.

The HZ series uses an electrostatic probe that is capacitively coupled to the main line. Unlike the HY series loop sampler, the HZ sampler does not provide a DC return in the branch arm. Microlab states that the HZ series is employed when a DC return is not required in the auxiliary output.

Manufacturer specifications:

  • Model: HZ-10F
  • Frequency Range: 50 MHz to 12 GHz
  • Impedance: 50 Ohms
  • Maximum VSWR: 1.2
  • Maximum Insertion Loss: 0.2 dB
  • Average Power Rating: 500 Watts
  • Peak Power Rating: 5 Kilowatts
  • Main Line Connectors: SMA Male and Female
  • Auxiliary Output: BNC Female
  • Continuously

    Note to me: plastic bin 1 in right rear of garage

    I normally ship within 24hours of your order, but the post office does not alwaysinitiate tracking when Iput the packages in the drop off box.

Buy Now

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.


Related Userbars
       

More items on eBay

As an eBay Partner, userbars.org may earn a commission from qualifying purchases.



All userbars are property of respective authors.
Copyright © 2002 4homepages.de | Template © 2005 Bali Web Design