Description: - 100% New and High Quality
- 1 Year Warranty
- Type: Bearing Removal Install Tool
- Set or Single Item: Set
- Color: Black
- Material: Steel
- Drift Size: 2-3/16", 2-11/32", 2-7/16", 2-9/16, 2-19/32", 2-13/16", 2-7/8", 3-3/32", 3-5/16", 3". 3-13/32" and 3-19/32"
- Hub Screws: (3) M12 × 11.5, (3) M14 × 1.5mm
19pcs Master Set Front Wheel Hub Drive Bearing Removal Install Service Tool Kit
Description:
- 100% New and High Quality
- 1 Year Warranty
- Type: Bearing Removal Install Tool
- Set or Single Item: Set
- Color: Black
- Material: Steel
- Drift Size: 2-3/16", 2-11/32", 2-7/16", 2-9/16, 2-19/32", 2-13/16", 2-7/8", 3-3/32", 3-5/16", 3". 3-13/32" and 3-19/32"
- Hub Screws: (3) M12 × 11.5, (3) M14 × 1.5mm
- Universal 19 pieces hub & bearing puller
- Comprehensive set for the removal and installation of front hub bearings
- Made of high quality steel and also come with a corrosion and rust resistant black oxide finish.
- The Front Wheel Drive Bearing Adapter Kit can offer you a fast and effective removal and installation of wheel bearings on front wheel drive vehicles while keeping the steering knuckle and strut assembled in tact on the vehicle, eliminating the need for front end alignment once the work is done.
- Comes with a durable storage case, convenient to collect the tools and transport.
How to operate?
- Step.1 Determine if the vehicle has a trapped rotor or a floating rotor.
- Step.2 Assemble the tool components, and press out the worn bearing.
- Step.3 Lightly lubricate the new bearing, and position it for installation with the tool
- components assembled. Press the bearing into the spindle assembly until it bottoms.
- Step.4 Fasten the bearing retainer in place using the bearing retainer bolts. (On Neon vehicles, install the snap ring in the knuckle.)
- Step.5 Assemble tool components. Lightly oil the hub assembly, and install the hub. Attention: The bearing installer must be assembled with the flat side toward the bearing and the small diameter pilot on the side away from the bearing.
- Step.6 Assemble the remaining vehicle components that were removed for bearing replacement: (1)lower ball joint to steering knuckle assembly brake rotor. (2)disc brake caliper. (3)outer tie rod nut and tie rod. (4)axle nut. (5)front tires.
- Noted: The bearing installer must be assembled with the flat side toward the bearing and the small diameter pilot on the side away from the bearing.
Application for:
This bearing removal and installation tool comes with adapter plates sized 55–92 mm.For most front wheel drive cars, vans & light trucks. Please note that it is NOT suitable for motorcycles, heavy-duty pickup trucks, or rear-wheel-drive vans. Please verify your vehicle type before ordering to ensure compatibility.
Not compatible for 2011 Honda Accord V6 3.5L Including multiple sizes of drifts, and the kit can be used for different models.
Package includes:
- 1 × Steel Drifts : 38mm
- 2 × Drift : 86mm, 91mm
- 1 × Receiver Sleeve : 76mm
- 9 × Adapter Drift: 55.5mm, 59mm, 62mm, 65mm, 66mm, 71.5mm, 73mm, 78mm, 84mm
- 3 × Hub Screw : M12 × 1.5 mm
- 3 × Hub Screw : M14 × 1.5 mm
- W/O Product Instruction
About LABLT:
LABLT has rich experience in the production, sales and after-sales service of automobile and motorcycle parts. For many years, we have been committed to providing professional and personalized services to enhance the shopping experience of buyers. If you need any parts, please come to LABLT to buy them. We look forward to cooperating with you!
Item SpecificsCountry of Origin United StatesBrand LABLTManufacturer Part Number OM355707OCType Bearing Removal Install ToolWarranty 1 YearMaterial MetalTool Color BlackSet or Single Item SetNumber of Pieces 19PCSFitment Type Direct ReplacementUniversal Fitment YesHub Screws Size (3) M12×11.5, (3) M14×1.5mmDrift Size 55.5, 59, 62, 65, 66, 71.5, 73, 78, 84, 86, 91mmFeatures Durable/PortableModel For most front wheel drive cars and vansNotes W/O Product Instruction
PAYMENT & DELIVERY
Pickup is not available as all items are shipped to buyers - NO EXCEPTIONS
Orders are posted by USPS or Fedex
WARRANTY INFORMATION
The most Products has months warranty .
The warranty does NOT cover damage of faulty Goods caused by: an accident or crash, damage caused in transit, damage cause by unauthorised repairs, improper installation of the Goods.
RETURN POLICY
If you have purchased the wrong Good or are returning a Good as a warranty claim, we will accept a return of that good and issue refund or send out a replacement Good subject to the following:
you must contact us first about the Goods before returning the Goods to us, and if we agree to accept a return of the incorrectly purchased Good or if we agree to accept the warranty claim over the Good then you MUST do the following:
the Goods must be securely and appropriately packed so they are not damaged during transit;
the Goods must be returned in their original packaging;
the Goods must be like new and not show any signs of use or having been installed or fitted;
the claim for refund must be advised to us no later than 30 days after the date you bought the Good.
DESCRIPTIONPAYMENTSHIPPINGRETURN POLICYCONTACT US Shop CategoryStore Home Suspension & Steering Lighting & Lamps◈Fog Lights◈Xenon Headlight Ballast◈Headlight◈Fog Lamps cover◈Turn Lights◈Brake Lights◈Truck Light Strip◈Moto Lighting & Lamps◈Others◈Tail Lights Carburetor◈Lawn Mowers Carburetor◈String Trimmers Carburetor◈Blower Carburetor◈Snow Blower Carburetor◈Saw Carburetor◈Tractor Carburetor◈Motorcycle Carburetor◈ATV Carburetor◈Automobile Carburetor◈Others◈Golf Carburetor◈Gasket◈Rebuild kit◈Intake Manifold Boot Boat◈Steering Shaft Pin◈Yacht Light◈Others Auto Valve◈Pressure Relief Valve◈Air Idle Valve◈VVT Valve◈Transmission Solenoids◈Control Valve◈Valve Body◈EGR Valve◈Others Motorcycle Valve◈Motorcycle Solenoid Valve◈Motorcycle fuel Switch Valve◈Others Fule Injector Brakes & Brake Parts◈Brake Master Cylinder◈Clutch & Clutch Parts◈Motorcycle Hand Brake Handle◈Motorcycle Brake Cable◈Motorcycle Brake Pads◈Others◈ Brake Lines Car Repair Kit Auto Engine System◈Valve Cover & Gasket◈Oil Cooler◈Engine Timing Cover◈Turbine Cover◈Oil Pan◈Automobile Heaters&Accessories◈Engine Coolant Recovery Tank◈Hydraulic Roller◈Glow Plug◈Filter Housing &Accessories◈Engine Rocker Arm Shaft Sleeve◈Engine Hood◈Oil Scale◈Coolant Water Inlet Pipe◈Others Auto Ignition System◈Spark Plug◈Car Ignition Coil◈Spark Plug Protective Cover◈Ignition Switch◈Car Ignition Module◈Others Auto Hub◈Locking Hub◈Hub Bearing◈Wheel Spacers Adapters◈Others Motorcycle Ignition System◈Motorcycle Ignition◈Motorcycle Ignition Coil◈Motorcycle Fuel Switch◈Motorcycle Hand Plate◈Motorcycle Ignition Switch◈Motorcycle Starter Fitting◈Motor Electromagnetic Starter◈Others Motorcycle engine system◈Piston Cylinder Fittings◈Crankshaft◈Others Auto Actuator◈Air Conditioner Actuator◈Door Lock Actuator◈Eccentric Shaft Actuator◈Hood Catch◈AC Blower Motor◈Clutch Actuator◈Fuel Door Opener Actuator◈Others Auto Motor◈Transmission stepper motor◈Power Window Lift Motor◈Brake Caliper Servomotor◈Transfer Case Gear Motor◈Front Running Board Motor◈Blower Resistor◈Others Auto Inlet & Outlet System◈Air Filter◈Intake Exhaust Valves◈Throttle Body◈Power Brake Booster◈Exhaust And Intake Pipes◈Turbocharger◈Others Auto Circuit Wiring Harness◈Airbag Hairspring◈Positive Battery Cable◈Sensor Harness◈Body Wiring Harness◈Gear Shift Control Cable◈Battery Terminal◈Others Transmission Power Hose◈Others Auto Switch◈Door Power Window Switch◈Neutral Safety Switch◈Combination Lever Motorcycle Control System◈Gearbox Shift Regulator◈Thumb Oiler◈Others Auto Sensor◈TPMS Sensor◈Mass Air Flow Sensor◈Oxygen Sensor◈Knock (Detonation) Sensor◈Air Pressure Sensor◈Throttle Position Sensor (TPS)◈Vehicle Speed Sensor◈ABS Wheel Speed Sensor◈Fuel Pressure Sensor◈Crankshaft Position Sensor◈Oil Pressure Sensor◈Ride Height Sensor◈PDC Sensor◈MAP Sensor◈Exhaust Pressure Sensor◈Coolant Temperature Sensor◈Acceleration Sensor◈Others Motorcycle Pump◈Fuel Pump◈Brake Calipers◈Others◈Water Pump Auto Interior◈Plastic Rivets Fasteners◈Trunk Shield◈Sunroof Sunshade Corn◈Armrest Center Box Cover◈Cup Holder◈Inside Door Handle◈Inner Door Panel Handle◈Cigarette Lighter◈Storage Box◈Air Conditioner Vent◈Others◈Seat Covers◈Floor Mats Exterior Trimming Parts◈Roof Rack◈Running Boards/Side Steps◈Bmuper Grille◈Fender Flares◈Front Bumper Grille Guard◈Door Handle◈Fuel tank cap◈Hinge◈Front Bumper◈Rear Bumper◈Motorcycle Wiper Blades◈Window Visors◈Front bumper trim◈ Auto body trim panel Auto Pump◈Fuel Pump◈Water Pump◈High Pressure Fuel Pump◈Air Pump◈Power Steering Pump◈Clutch Master Cylinder◈Oil Pump◈Others Radiators & Parts Special Vehicles & Boats◈Go Kart Parts◈Excavator Parts◈Golf Cart Parts◈Boat Parts◈Snowmobile Parts◈Truck Parts Motorcycle Parts◈Motorcycle Carburetor Parts ATV&UTV Parts◈ATV&UTV Suspension System ◈ATV&UTV Brake System◈ATV&UTV Pump◈ATV&UTV Carburetor Parts◈ATV&UTV Body&Frame◈ATV&UTV Ignition System◈ATV&UTV Engine System◈ATV&UTV Intake&Exhaust System◈ATV&UTV Transmission System◈ATV&UTV Steering System◈ATV&UTV Control System◈ATV&UTV Switch◈ATV&UTV Sensor Industrial Bar♢Collet Chuck♢Drill Chuck♢Drill Chuck Arbors♢Edge Finder♢Live Center♢Milling Arbor♢Quick Change Tool Post♢Reamer♢Spring Materials♢Interior Door Fittings♢Paint Sprayers▷Generator Accessories♢Automatic Voltage Regulator♢Others▷Hand Tools♢Balance Level♢Casters♢Drill Bits♢Hydraulic Crimper♢Outside Micrometer♢Steel Tape Measure♢Rivet Gun◈Metalworking Supplies◈Industrial Control Module Home & Garden◈Chainsaw Accessories◈Lawn Mower Accessories◈Leafblower Accessories◈Snowblower Accessories◈Yard, Garden & Outdoor Living◈String Trimmer Accessories◈Others OtherHot Item LABLT Window Moulding Trim Weather Strips Seal Belt For Honda Civic 2012-14 2015 USD 31.29 LABLT Power Steering Pump For 2002-2011 Honda CRV Accord Acura RSX 2.0L 2.4L l4 USD 34.66 LABLT 100Pcs Plastic Rivets Fasteners 8mm Dia Hole For Car Auto Bumper Fender USD 5.22 Carburetor Carb for Yamaha Bear Tracker 250 YFM250 With Manifold 1999-2004 ATV USD 32.22 LABLT Pair Headlights Halogen Chrome Clear Lens For 2008-2010 Toyota Highlander USD 78.17 Excellent Delivery
New List Item LABLT Gloss Black Rear Bumper Face Bar Trim 2PCS For Cadillac Escalade ESV 21-23 USD 79.48 New Trailer Wiring Harness 4-Way Flat Trailer Output For Toyota Tacoma 2005-2015 USD 33.04 LABLT 2-5/16\" Gooseneck Ball Puck System & Safety Chain Kit 60638 For Ram Truck USD 89.48 LABLT Headlamp Surround Trim For Nissan Pathfinder 22‑2024 623836TA0A 623826TA0A USD 31.29 LABLT Right&Left Side LED Fog Lights Lamp Assembly For 2025-2026 Subaru Forester USD 197.15 19pcs Master Set Front Wheel Hub Drive Bearing Removal Install Service Tool Kit
Description:
- 100% New and High Quality
- 1 Year Warranty
- Type: Bearing Removal Install Tool
- Set or Single Item: Set
- Color: Black
- Material: Steel
- Drift Size: 2-3/16", 2-11/32", 2-7/16", 2-9/16, 2-19/32", 2-13/16", 2-7/8", 3-3/32", 3-5/16", 3". 3-13/32" and 3-19/32"
- Hub Screws: (3) M12 × 11.5, (3) M14 × 1.5mm
- Universal 19 pieces hub & bearing puller
- Comprehensive set for the removal and installation of front hub bearings
- Made of high quality steel and also come with a corrosion and rust resistant black oxide finish.
- The Front Wheel Drive Bearing Adapter Kit can offer you a fast and effective removal and installation of wheel bearings on front wheel drive vehicles while keeping the steering knuckle and strut assembled in tact on the vehicle, eliminating the need for front end alignment once the work is done.
- Comes with a durable storage case, convenient to collect the tools and transport.
How to operate?
- Step.1 Determine if the vehicle has a trapped rotor or a floating rotor.
- Step.2 Assemble the tool components, and press out the worn bearing.
- Step.3 Lightly lubricate the new bearing, and position it for installation with the tool
- components assembled. Press the bearing into the spindle assembly until it bottoms.
- Step.4 Fasten the bearing retainer in place using the bearing retainer bolts. (On Neon vehicles, install the snap ring in the knuckle.)
- Step.5 Assemble tool components. Lightly oil the hub assembly, and install the hub. Attention: The bearing installer must be assembled with the flat side toward the bearing and the small diameter pilot on the side away from the bearing.
- Step.6 Assemble the remaining vehicle components that were removed for bearing replacement: (1)lower ball joint to steering knuckle assembly brake rotor. (2)disc brake caliper. (3)outer tie rod nut and tie rod. (4)axle nut. (5)front tires.
- Noted: The bearing installer must be assembled with the flat side toward the bearing and the small diameter pilot on the side away from the bearing.
Application for:
This bearing removal and installation tool comes with adapter plates sized 55–92 mm.For most front wheel drive cars, vans & light trucks. Please note that it is NOT suitable for motorcycles, heavy-duty pickup trucks, or rear-wheel-drive vans. Please verify your vehicle type before ordering to ensure compatibility.
Not compatible for 2011 Honda Accord V6 3.5L Including multiple sizes of drifts, and the kit can be used for different models.
Package includes:
- 1 × Steel Drifts : 38mm
- 2 × Drift : 86mm, 91mm
- 1 × Receiver Sleeve : 76mm
- 9 × Adapter Drift: 55.5mm, 59mm, 62mm, 65mm, 66mm, 71.5mm, 73mm, 78mm, 84mm
- 3 × Hub Screw : M12 × 1.5 mm
- 3 × Hub Screw : M14 × 1.5 mm
- W/O Product Instruction
About LABLT:
LABLT has rich experience in the production, sales and after-sales service of automobile and motorcycle parts. For many years, we have been committed to providing professional and personalized services to enhance the shopping experience of buyers. If you need any parts, please come to LABLT to buy them. We look forward to cooperating with you!
PAYMENTSHIPPING & DELIVERYWARRANTY INFORMATIONRETURN POLICY
Pickup is not available as all items are shipped to buyers - NO EXCEPTIONS
Orders are posted by USPS or Fedex
The most Products has months warranty .
The warranty does NOT cover damage of faulty Goods caused by: an accident or crash, damage caused in transit, damage cause by unauthorised repairs, improper installation of the Goods.
If you have purchased the wrong Good or are returning a Good as a warranty claim, we will accept a return of that good and issue refund or send out a replacement Good subject to the following:
you must contact us first about the Goods before returning the Goods to us, and if we agree to accept a return of the incorrectly purchased Good or if we agree to accept the warranty claim over the Good then you MUST do the following:
the Goods must be securely and appropriately packed so they are not damaged during transit;
the Goods must be returned in their original packaging;
the Goods must be like new and not show any signs of use or having been installed or fitted;
the claim for refund must be advised to us no later than 30 days after the date you bought the Good.
All rights reserved.
On Sep 12, 2026 at 05:27:58 PDT, seller added the following information:
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.