Hub Screws:(3) M12x11.5, (3) HOME PAGE
Visit my Store to see new items that you like
19PCS Master Set Front Wheel Hub Drive Bearing Removal Puller Service Tool Kit Description:
The item will be shipped from our US warehouse.
Comprehensive set for the removal and installation of front hub bearings
No dismantle of steering assembly needed
Heavy duty steel drifts
These front wheel bearing adapters replace wheel bearings while keeping the steering knuckle and strut assembly in tact on the vehicle, eliminating the need for front end alignment once the work is done
Drift Size:2-3/16", 2-11/32", 2-7/16", 2-9/16, 2-19/32", 2-13/16", 2-7/8", 3-3/32", 3-5/16", 3". 3-13/32" and 3-19/32"
Hub Screws:(3) M12x11.5, (3) with 55-92mm adapter plates, suitable for lightweight front-wheel-drive sedans and compact sport utility vehicles, not applicable to motorcycles, heavy-duty pickups, or rear-wheel-drive x Steel Drifts : 38mm
2 x Drift : 86mm, 91mm
1 x Receiver Sleeve : 76mm
9 x Adapter Drift: 55.5mm, 59mm, 62mm, 65mm, 66mm, 71.5mm, 73mm, 78mm, 84mm
3 x Hub Screw : M12 x 1.5 mm
3 x Hub Screw : M14 x 1.5 mm
Operation:
Step.1 Determine if the vehicle has a trapped rotor or a floating rotor.
Step.2 Assemble the tool components, and press out the worn bearing.
Step.3 Lightly lubricate the new bearing, and position it for installation with the tool
components assembled. Press the bearing into the spindle assembly until it bottoms.
Step.4 Fasten the bearing retainer in place using the bearing retainer bolts. (On Neon vehicles, install the snap ring in the knuckle.)
Step.5 Assemble tool components. Lightly oil the hub assembly, and install the hub. Attention: The bearing installer must be assembled with the flat side toward the bearing and the small diameter pilot on the side away from the bearing.
Step.6 Assemble the remaining vehicle components that were removed for bearing replacement: (1)lower ball joint to steering knuckle assembly brake rotor. (2)disc brake caliper. (3)outer tie rod nut and tie rod. (4)axle nut. (5)front tires.
Item SpecificsCountry of Origin United StatesBrand happy19starManufacturer Part Number HP118569Type Bearing Removal Install ToolWarranty 1 YearFitment For most front wheel drive cars, vans & light trucksSizes 55. 5. 59. 62. 65. 66. 71. 5. 73. 78. 84. 86. 91mmQuantity 19 PcsUniversal Fitment YesMaterial Steel
Shipping Payment Returns Before leaving us neutral or negative response, please contact us first.
We will do everything we can to give you a satisfying solution.
Please don't open case via or PayPal.
Please don't open any return request before contact us.
We do our best to resolve any issue. Leaving negative response and low ratings doesn't get things solved.
So please talk with us and we will not let you down.
About Us This is happy19star. We offer high quality products, competitive prices and prompt delivery .Please add us to your list of favorite sellers. Our company has experience in serving the global aftermarket. Thank you for your business. Best wishes!
Contact Us If you have problem, please do not hesitate to contact us by message. We will respone ASAP.
We appreciate response from our customers and strive to maintain a rating as close as possible to 100% perfect "Five-Star." If anything about your transaction did not meet your expectations, please let us know and provide us with the opportunity to fix our issues before you leave response. Customer service is very important to us , hope you can enjoy our store.
HOME PAGE
Visit my Store to see new items that you like
Fog LightsSearch Store Hot Item Hydraulic Cylinder Piston Rod Seal U-cup Installation Tool Kit Set - 3pcs S M L USD 12.47 For Car/Truck Camber/Castor Strut Wheel Alignment Universal Magnetic Gauge Tool USD 7.09 9U-7227 Injector Height Tool & J-38587-A Engine Barring Socket For CAT 3406E C15 USD 26.84 Overhead Valve Spring Remover Compressor Stem Engine Seal Keeper Replace Tool USD 11.37 Adjustable Gland Nut Wrench 1266 +7463 Spanner Tool Set for Hydraulic Cylinder USD 25.04 19PCS Master Set Front Wheel Hub Drive Bearing Removal Puller Service Tool Kit Description:
The item will be shipped from our US warehouse.
Comprehensive set for the removal and installation of front hub bearings
No dismantle of steering assembly needed
Heavy duty steel drifts
These front wheel bearing adapters replace wheel bearings while keeping the steering knuckle and strut assembly in tact on the vehicle, eliminating the need for front end alignment once the work is done
Drift Size:2-3/16", 2-11/32", 2-7/16", 2-9/16, 2-19/32", 2-13/16", 2-7/8", 3-3/32", 3-5/16", 3". 3-13/32" and 3-19/32"
Hub Screws:(3) M12x11.5, (3) with 55-92mm adapter plates, suitable for lightweight front-wheel-drive sedans and compact sport utility vehicles, not applicable to motorcycles, heavy-duty pickups, or rear-wheel-drive x Steel Drifts : 38mm
2 x Drift : 86mm, 91mm
1 x Receiver Sleeve : 76mm
9 x Adapter Drift: 55.5mm, 59mm, 62mm, 65mm, 66mm, 71.5mm, 73mm, 78mm, 84mm
3 x Hub Screw : M12 x 1.5 mm
3 x Hub Screw : M14 x 1.5 mm
Operation:
Step.1 Determine if the vehicle has a trapped rotor or a floating rotor.
Step.2 Assemble the tool components, and press out the worn bearing.
Step.3 Lightly lubricate the new bearing, and position it for installation with the tool
components assembled. Press the bearing into the spindle assembly until it bottoms.
Step.4 Fasten the bearing retainer in place using the bearing retainer bolts. (On Neon vehicles, install the snap ring in the knuckle.)
Step.5 Assemble tool components. Lightly oil the hub assembly, and install the hub. Attention: The bearing installer must be assembled with the flat side toward the bearing and the small diameter pilot on the side away from the bearing.
Step.6 Assemble the remaining vehicle components that were removed for bearing replacement: (1)lower ball joint to steering knuckle assembly brake rotor. (2)disc brake caliper. (3)outer tie rod nut and tie rod. (4)axle nut. (5)front tires.
ShippingPaymentReturnsAbout UsContact Us Before leaving us neutral or negative response, please contact us first.
We will do everything we can to give you a satisfying solution.
Please don't open case via or PayPal.
Please don't open any return request before contact us.
We do our best to resolve any issue. Leaving negative response and low ratings doesn't get things solved.
So please talk with us and we will not let you down.
This is happy19star. We offer high quality products, competitive prices and prompt delivery .Please add us to your list of favorite sellers. Our company has experience in serving the global aftermarket. Thank you for your business. Best wishes!
If you have problem, please do not hesitate to contact us by message. We will respone ASAP.
We appreciate response from our customers and strive to maintain a rating as close as possible to 100% perfect "Five-Star." If anything about your transaction did not meet your expectations, please let us know and provide us with the opportunity to fix our issues before you leave response. Customer service is very important to us , hope you can enjoy our store.
All rights reserved.
On Jul 16, 2026 at 19:23:26 PDT, seller added the following information: