New 2026 Edition DIY 3x 18650 Solderless Power Bank Case Kit
Dual USB Output | Type-C & Micro USB Dual Input | LED Digital Display | Integrated Soft LED Night Light | Cyberpunk Transparent Shell
Build Your Own High-Capacity Portable Charger
Build your own high-capacity portable charger with this DIY 3x 18650 solderless power bank case kit. Engineered for enthusiasts, travelers, and emergency preparedness, this enclosure features dual USB output ports, Type-C and Micro USB dual input interfaces, a clear digital battery level display, an integrated soft LED night light, and a stylish transparent technology shell.
Skip the complex wiring and soldering irons. With snap-in battery bays and an intelligent protective circuit board, you can turn three standard flat-top 18650 lithium-ion cells into a fully customized, high-efficiency portable power station in just seconds.
⚡ Key Product Highlights 🛠️ DIY Solderless Installation:
Features snap-in spring battery contacts for easy 3x 18650 cell installation and replacement without requiring soldering irons or special tools.
🔌 Dual USB Charging Outputs:
Equipped with two standard USB-A output ports allowing simultaneous charging of two smartphones, tablets, or USB accessories (5V / 2A, up to 10W max power output).
🔄 Dual Input Versatility (Type-C + Micro USB):
Offers both Type-C and Micro USB input ports for convenient power bank recharging using standard phone charging cables.
💡 Built-in Soft LED Night Light:
Integrated multi-LED ambient night light provides soft illumination for emergency power outages, camping, tents, or nighttime bedside use.
💎 Transparent Cyberpunk Aesthetic:
Modern semi-transparent housing reveals internal circuit board technology while providing a durable protective enclosure.
📊 Smart Digital LED Power Display:
Integrated digital screen shows remaining battery percentage (25%, 50%, 75%, 100%) and active charging status at a glance.
🛡️ Multi-Protection Safety Circuit:
Intelligent PCB safeguards against overcharging, over-discharging, short circuits, reverse polarity, and low-temperature overheating.
📱 Universal Device Compatibility:
Compatible with standard USB-powered electronics, including smartphones, handheld fans, wireless earbuds, and portable speakers.
📋 Technical Specifications & Product Information Feature / Attribute Imperial / American Standard International Metric Units Product Category DIY Power Bank Enclosure Box DIY Power Bank Enclosure Box Quantity Per Package 1 Piece Case Kit (No Batteries) 1 Piece Case Kit (No Batteries) Supported Battery Type 3 x Flat-Top 18650 Li-ion Cells 3 x Flat-Top 18650 Li-ion Cells Required Cell Dimensions Approx. 0.71 in (D) x 2.56 in (L) Approx. 18.0 mm (D) x 65.0 mm (L) Power Output Rating 5V / 2A (10W Fast Charging) 5V / 2A (10W Fast Charging) Output Interfaces 2 x Standard USB-A Ports 2 x Standard USB-A Ports Input Interfaces 1 x Type-C Port, 1 x Micro USB Port 1 x Type-C Port, 1 x Micro USB Port Display Screen Type Digital LED Battery Level Display Digital LED Battery Level Display Auxiliary Lighting Integrated Soft LED Night Light Integrated Soft LED Night Light Assembly Method Solderless Spring Contact Snap Box Solderless Spring Contact Snap Box Shell Materials Polycarbonate, Durable ABS Plastic Polycarbonate, Durable ABS Plastic Case Net Weight (Empty) Approx. 2.12 oz Approx. 60.0 g Primary Uses DIY Power Bank, Emergency Power DIY Power Bank, Emergency Power Brand Designation Unbranded Unbranded Condition 100% Brand New 100% Brand New Country of Origin China China
📌 Buyer Disclaimer & Cell Compatibility Notice: Package includes 1 Piece DIY Power Bank Case Enclosure Kit; 18650 Batteries Are NOT Included. 🔋 Battery Selection & Sizing Requirement: This DIY box requires three (3) flat-top 18650 rechargeable lithium-ion cells. Individual Cell Dimensions Required: Diameter approx. 0.71 in (18.0 mm), Length approx. 2.56 in (65.0 mm). Do NOT use button-top or custom protected 18650 cells as extended length will prevent case closure. Please pay close attention to positive (+) and negative (-) polarity during installation to avoid circuit damage. 📏 Measurement Deviation Notice: Manual measurement tolerance: Please allow 0.04 in - 0.12 in (1.0 mm - 3.0 mm) variation. 🖥️ Display Notice: Actual shell color tone or LED indicator contrast may vary slightly due to photography studio lighting and individual monitor calibrations. 📐 Conversions: 1 in = 2.54 cm = 25.4 mm | 1 lb = 16 oz = 453.59 g | 1 oz = 28.35 g. 🛠️ Operating Instructions & How to Use
To ensure proper assembly, board activation, and safe operation, please follow these steps:
1. Open Enclosure: Carefully unclip the outer transparent protective cover to reveal the internal spring-loaded battery bay.
2. Insert 18650 Cells: Insert three (3) flat-top 18650 rechargeable batteries, matching the positive (+) and negative (-) terminals correctly with the PCB contact springs.
3. Close Case: Snap the outer shell cover back onto the base frame securely.
4. Initial Activation: Plug a Type-C or Micro USB charging cable into the input port and connect to a USB power adapter to activate the circuit board for first-time use.
5. Daily Operation: Connect USB charging cables into the dual USB output ports to charge devices. Press or hold the power button to toggle the LED night light function on/off.
⚠️ Product Safety & Care Instructions
- Polarity Check: Double-check cell alignment (+ and -) before closing the case to prevent shorting or over-temperature conditions.
- Battery Quality: Use identical 18650 cells with matching voltage levels and capacity for optimal charging efficiency and cycle life.
- Water & Heat Safety: Keep the circuit enclosure dry and away from high-temperature heat sources or direct flame.
📦 Package Content Inventory List
1 x 3-Bay DIY Solderless 18650 Power Bank Enclosure Case (Batteries Not Included)
1 x Built-in Lanyard Carry Strap
Why Choose Us? ✅ Fast US Shipping – We prioritize quick dispatch so you can get your products sooner.
✅ Quality Guaranteed – 100% Brand new, high-quality products.
✅ Hassle-Free Returns – Your satisfaction is our top priority!
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.