Product Description
Repair worn or damaged fishing rod guide inserts without replacing the entire guide.
This ceramic ring repair kit includes 11 commonly used sizes for replacing broken or missing rod guide inserts. The smooth ceramic surface helps reduce friction against the fishing line, minimizing line wear and supporting smoother casting.
With multiple sizes included, the kit is suitable for repairing a wide variety of fishing rods and rod guides.
Features
【11 SIZES / 160PCS SET】
Includes 11 different ceramic ring sizes for repairing a wide range of fishing rod guides. Sizes #4 through #25 include 15 pieces each, while size #30 includes 10 pieces.
【SMOOTH CERAMIC SURFACE】
The polished ceramic surface provides smooth line contact, helping reduce friction and wear on fishing line during casting and retrieval.
【REPAIR WITHOUT REPLACING THE GUIDE】
Designed to replace the damaged ceramic insert inside an existing rod guide, allowing you to repair the guide without removing and replacing the entire guide frame.
【HELPS PROTECT FISHING LINE】
A smooth guide surface reduces unnecessary abrasion on mono, fluorocarbon and braided fishing lines.
【MULTIPLE SIZES FOR DIFFERENT GUIDES】
The wide size range makes this kit useful for anglers, fishing rod builders and DIY rod repair.
【COMPACT REPAIR KIT】
A practical addition to your tackle box or rod repair supplies for replacing cracked, chipped or missing guide inserts.
Specifications:
Product Type: Fishing Rod Guide Ceramic Ring Repair Kit
Material: Ceramic
Number of Sizes: 11
Total Quantity: 160 Pieces
Application: Fishing Rod Guide Repair
Size ChartSizeOuter DiameterInner DiameterQty#43.7 mm / 0.14 in2 mm / 0.08 in15 pcs#54.7 mm / 0.18 in3 mm / 0.12 in15 pcs#66 mm / 0.24 in4 mm / 0.16 in15 pcs#76.8 mm / 0.27 in4.5 mm / 0.18 in15 pcs#87.9 mm / 0.31 in5 mm / 0.20 in15 pcs#109.8 mm / 0.39 in7 mm / 0.28 in15 pcs#1211.6 mm / 0.46 in8.3 mm / 0.33 in15 pcs#1614.6 mm / 0.57 in11 mm / 0.43 in15 pcs#2018.6 mm / 0.73 in13.8 mm / 0.54 in15 pcs#2523.5 mm / 0.93 in18 mm / 0.71 in15 pcs#3030 mm / 1.18 in23 mm / 0.91 in10 pcsInstallation Instructions:
Before Installation
Remove any remaining adhesive from the existing metal guide frame with fine sandpaper. Check that the guide frame is not bent or damaged before installing the replacement ceramic ring.
Step 1 – Fit the Ceramic Insert
Select the correct ceramic ring size and carefully place it inside the existing guide frame.
Wrap a small hammer or tapping tool with a soft cloth and gently press or tap the ceramic insert into position.
Do not strike the ceramic ring directly, as excessive force may crack or break it.
Step 2 – Apply Adhesive
Once the ceramic insert is properly seated, apply a small, even amount of suitable adhesive around the gap between the ceramic ring and the metal guide frame.
Avoid getting excessive glue inside the ceramic opening.
Step 3 – Allow to Cure
Allow the adhesive to fully cure according to the adhesive manufacturer's instructions.
Once dry, carefully remove any excess adhesive around the opening with an appropriate trimming tool.
Package Includes:
160 × Fishing Rod Guide Ceramic Ring Inserts
Notes:
- Please measure the inside diameter of your existing rod guide frame carefully before selecting a replacement ring.
- Slight dimensional variations may occur due to manual measurement.
- Ceramic inserts are fragile. Avoid direct impact or excessive force during installation.
- Adhesive and installation tools are not included unless otherwise stated.
- Make sure the guide frame is clean, undamaged and properly aligned before installation.
- Product appearance may vary slightly due to lighting and monitor settings.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.